Jump to content
SAU Community

Recommended Posts

Hi guy's I was wondering if anyone had experienced this before.

Some where in the driver side I occasionally hear a rubbing noise when I go over bumps, although my car is not lowered, its not the wheels rubbing on the guard, its only on the driver side and usually occurs in the wet although sometimes in the dry. It doesn't do it all the time.

I don't feel anything different in the steering wheel, its just normal. I jacked up my car and had a look underneath and I couldnt see anything loose or wrong. In a way it could be my bushes although I've never had to change bushes so im not sure.

This morning it was making the noise when I went over bumps on the road, and I noticed when I went over speed humps the noise was delayed. What I mean is it did it after the front wheel had gone over the speed hump.

What do you guy's think???

:rolleyes:

Link to comment
https://www.sau.com.au/forums/topic/16460-squeeky-rubbing-noise/
Share on other sites

do the old "push and watch it bounce" trick to see whether its the shocks.. mine got to a "clunking" stage in my old car, every bump "clunk" till i got them replaced.

If its not that, could be the suspension bushes like you said..

u can drive with no shockers you just bouce all over the place over bumps...so yes..

the noise is annoying isnt it, but the car should last for a long while yet. When you start hitting bumps and the car just really bumps and sort of lifts off the ground then maybe you should consider changing it. Im just leaving it for now, ill probably change them when i get bigger wheels which is a long way away so i guess just live with the noise for now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • BOVs do have a purpose, if you ever log pressure before and after the throttle body, you will see a spike pre throttle on lift off from a WOT condition. Enough to bend throttle blades / damage e-throttle motors or simple assist in blowing off cooler pipes. FWIW, the above on really applies to those running at least 2 bar of boost. OP shouldn't have an issue, on the other hand, here are some videos of my shit box over a decade ago with some succulent dose with the airbox on and off. That shit box is unrecognisable these days 🫠    
    • I've tried all different combinations of BOVs/ no BOV and stock bypass valves over the years, on gear changes the stock bypass valve seems to get the car back on boost quicker because in part the turbos wheel speed isn't being slowed down by reversion, although they have issues holding boost much over the stock setting. Most aftermarket BOVs you can adjust the spring, tighter will make it open later and close sooner, but in my experience it'll cause a bit of flutter at low load/rpm anyway. I've also got some input into this whole no bov causing turbo wear, never had an issue on any on my turbos HOWEVER, I got my R33 GTST with 200k kms on it, with from what I can see still has the original turbo, no lateral shaft play but has about 4-5mm of play in and out which to me seems like a worn thrust bearing from years (100-150k kms?) of turbo flutter running no bov, so maybe there is some truth to it in the long run. But that'll never stop me loving the Stutututu while I have the car.   OP just wants to know if he can run a atmo vented BOV with no major issues and the answer is YES, plenty of people do it, there's no harm in installing it and seeing how it runs before spending $$$ on an aftermarket ecu, last time I bought a Nistune it was $2400 for install and a tune , unsure of todays prices but you get me. Crazy money to spend just to fix the minor inconvenience of stalling that can be overcome by letting the revs come down to near idle before putting the clutch in or a little bit of throttle to avoid it. You're better off leaving the ecu and tune for after a bigger turbo/injectors have been installed to take full advantage of the tune and get your moneys worth.   Let OP have his Whoosh sound without trying to break his bank haha
    • I see you missed the rest of the conversation where they have benefits, but nothing to do with avoiding breaking turbos, which is what the aftermarket BOV made all the fan boys, tuners, and modders believe was the only purpose for them...
    • But they do so for the other reasons to have a compressor bypass. It's in the name.
×
×
  • Create New...