Jump to content
SAU Community

Recommended Posts

a new paint job?

hard to say really, the amount of money you put into mods your not gonna make it back when you re-sell it. your lucky if you just break even. thats why everyone takes em off and sell them seperately. also the amount of cars now for sale already have mods so the next thing if not first for people to compare is overall condition of car and engine.

Adding performance mods won't really increase value, well, at least not in a way that'll make a profit. The money you spend on the mod will not be recovered.

The reason being that people want to buy a car that has not been thrashed..... Usually because they want to be the one to thrash it.

If you're looking at increasing the value of the car, you can either make it more pristine, or you can go the dodgy and cover up faults.

You may get the money back on highflowing the turbo, because people generally don't like ceramic turbos, and it's only about 1.5K

other than that, replacing the leather boots and tidying up the interior will add value, also any body rust that can be removed.

It's really only neatening up, not really modding.

Having said all that, it's really depending on what people are willing to pay.

a new paint job?

Only if its in the factory colour, or you strip the car down and get everything painted (and even then you won't make a profit on it since that kind of paint job is going to cost you a fortune).

Otherwise, if potential buyers find the exterior paint a different colour to the interior paint (like the door sills, engine bay, etc) they'll assume its been resprayed due to an accident repair....and there goes your resale value.

I'm just wondering what parts or modifications can add value to the car?

A history. Some people will pay well over market for a car that's been owned by someone famous or something.

Or if the car becomes a cult classic. Look at the Takumi tax on AE86s - ever since Initial D came out the price for those nuggets have skyrocketed. Same with classic cars like MGBs, or old Monaros, XY GT Falcons, etc.

Aside from that, you've got buckleys of improving resale on a vehicle.

Simple rule when it comes to cars. Any money you spend on upgrading them is essentially lost money. So unless you do all the work yourself fitting up whatever you will certainly lose money.

Best bet is to get it clean & neat. If you have to spend a few hundred dollars on panel & paint then so be it. Beyond that & fixing any glaring faults, just leave it alone. That is pretty much what the car yards do - which tells you all you need to know.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, this is one of the most annoying things about nissan part numbers... I've got an unrelated example... Image is of the AT output shaft ~ they have the same part#, but clearly the shaft on the left is beefier design to that on the right ...the difference (essentially) is the 'lighter' shaft on the right, is for engines up to RB25DE (this includes RB20 variants) : the shaft on the left is for RB25/26DET(T)....are they interchangeable? Yes...but obviously one shaft is going to be stronger than the other...and, the lighter shaft is around USD115, but the heavier shaft closer to USD150...same part#... ...epc-data usually tells a tale ~ the amayama listing for 39100-23U60 has a note "Longest side is between 60 and 105 cm" ; no such info is there for 39100-23U70 ...and given the great disparity in price between the 2 parts, it makes me at least curious (to the point of caution) where the 'extra money' went? ...ie; these 2 parts have a cost difference that (to myself at least) isn't explained by 'plastic boot'...ie; with amayama there's AUD700 price difference ...plastic versus rubber?...I'm not seeing it like that...and 60cm ~ 105cm...??...that's a huge disparity....something hinky going on here... I'd try searching by VIN, not model... /2cents
    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
×
×
  • Create New...