Jump to content
SAU Community

Recommended Posts

  • Replies 97
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Been good reading guys, thanks.

If i hit 250 with a nice fat curve thru the middle, I'll be pretty damn happy :)

Just so you know, it'll be :

Z32

s15 injectors, 450cc

Tomei Fuel Pump

Power FC

FMIC

Zorst/Pod

I'll post it up soon enough....

  • 3 weeks later...

So the GTRS is the GT2535?... Is this the most popular street turbo for the rb25det, How much is it?

I have a:

Apexi power FC

E-boost

Apexi turbo timer

3" exhaust from turbo back

Front mount intercooler with custom piping

Custom cold air intake

Custom intake plenum

80mm throttle body

post-28112-1179133304_thumb.jpg

Im getting injectors the same time as the turbo as they are maxed out now.

Will i need the Z32 afm or will it be ok?

Would it be wise to get an aftermarket exhaust manifold? if so top mount or low mount?

Will the set up i have reach around the 250kw atw.

Thanks mate much appreciated. Slowly getting there.

Does the GTRS have a T3 flange? I was doing some searching on horsepowerinabox and from what i can figure they reckon the GTRS is for the sr20det's and the GT3076 would be better for the rb25det's?

The GT3037/3076 is an exceptional turbo for its HP range. It features a .6 surge slotted comp cover and a complimenting turbine/comp wheel ratio, making it a great bolt on upgrade for the 2-3 litre range engine.

This unit has a lot of flexibility in offered houisings. It can be supplied with a T25 .86 internal housing, a T3 .63 or .82 external gate housing and a recent edition is the option of internal gate T3 in .63 or .82 (these units are more expensive and subject to availability at the time). Usual ultra reliability and superb response from the Garrett ball bearing design.

Great upgrade for RB20/25s and other 2.5-3 litre's looking for some serious power.

So the GTRS is the GT2535?... Is this the most popular street turbo for the rb25det, How much is it?

I have a:

Apexi power FC

E-boost

Apexi turbo timer

3" exhaust from turbo back

Front mount intercooler with custom piping

Custom cold air intake

Custom intake plenum

80mm throttle body

post-28112-1179133304_thumb.jpg

Im getting injectors the same time as the turbo as they are maxed out now.

Will i need the Z32 afm or will it be ok?

Would it be wise to get an aftermarket exhaust manifold? if so top mount or low mount?

Will the set up i have reach around the 250kw atw.

The GTRS is NOT the GT2535. But due to the very similar power delivery, HKS dropped the GT2535 once the GTRS was released.

Are you claiming to have 250rwkw with those mods, on the std turbo? If so go to another tunner, as he is pullin' your chain :P

On the other hand; Very neat and clean engine bay, looks awesome :)

The GTRS is rated at approx. 380hp

The GT3076 is rated at 500hp

Two totally different turbos with different power curves. The GT3076 is also a great turbo, but will be laggier than a GTRS, on an rb25. In fact i have just purchased the GT3076 to replace my GTRS, as i am doing an RB30 coversion and the GTRS would have been too small and would have resticted the engine.

Oh, and why are you gettin ganother one?

Wouldn't you just rebuild the one you have? or is that what you mean?

I lost my dyno (it was 339hp but whos counting), but supporting mods were

FMIC

Fuel Pump

S-AFC-II

Split dump, 3.5" front pipe, 3.5" de-cat, 3.5" exhaust

16psi on EBC

I sold that one, i got pissed off with spending $$ on car, but now i got the bug again and bought a trusted/renowned great turbo :D

That said, I'll have this new one installed soon so I can post a dyno then :)

The GTRS is NOT the GT2535. But due to the very similar power delivery, HKS dropped the GT2535 once the GTRS was released.

Are you claiming to have 250rwkw with those mods, on the std turbo? If so go to another tunner, as he is pullin' your chain :)

On the other hand; Very neat and clean engine bay, looks awesome :laugh:

The GTRS is rated at approx. 380hp

The GT3076 is rated at 500hp

Two totally different turbos with different power curves. The GT3076 is also a great turbo, but will be laggier than a GTRS, on an rb25. In fact i have just purchased the GT3076 to replace my GTRS, as i am doing an RB30 coversion and the GTRS would have been too small and would have resticted the engine.

he is asking once he gets the turbo and injectors done could he expect 250rkw out of the new set up.

Edited by fEkuaR

Nahh i got around 200rwkw now but i ment when i get the mods will i have around 250 like fEkuaR said.

Al

"In fact i have just purchased the GT3076 to replace my GTRS, as i am doing an RB30 coversion and the GTRS would have been too small and would have resticted the engine."

So what are u doing with your GTRS? selling :laugh:

post-28112-1179220218_thumb.jpg

The GTRS is a fair bit more powerful than the GT2535 hey.

Do they both spool up in roughly the same time?

Also can u get the GTRS externally gated as apose to internally? http://www.slidingperformance.com/catalog/...products_id=312

Pro's and con's?..........

There is a fair bit of info about the GTRS if you look around.

the best description I've heard is 'It has the response of a HKS2530 with the top end power of a HKS2540'

HKS2530 - supposed ot have ripper spool up as it;s quite small so you can't argue with that, but the top end, boost would drop off off as it choked and can't cope or whatever.

HKS2540 - Ripper top end but an absolute dog for lag etc.....only suitable for drags...

So combine the 2 and you have the GTRS

So, can we now keep this thread to be HKS2535 oriented?

Thanks peeps....

Nahh i got around 200rwkw now but i ment when i get the mods will i have around 250 like fEkuaR said.

Al

"In fact i have just purchased the GT3076 to replace my GTRS, as i am doing an RB30 coversion and the GTRS would have been too small and would have resticted the engine."

So what are u doing with your GTRS? selling :sleep:

Sorry, my bad.

Am selling, but already have 2 potential buyers.

Since the turbo is less than 5,000 km old, i do not intend to give it away :P

  • 4 months later...

HKS 2535 is now tuned up to my satisfaction and it's a wee rippa.

Made 245.9rwkws on The Hitman's dyno which i don't think is a happy-reading dyno.

See the results in the dyno thread.

Spools up nicely and sounds great.

Vote 1 for HKS2535

And another vote for the s15 injectors which have done the job easily with more room to move(currently hitting about 80%)

I'm now guessing these babies are good for 270-280 rwkws.

That's it, anymore mods will be more along the lines of sell and by a Mitsubishi Mirage...tehe (seriously)

But I'm going to enjoy this one for awhile yet

Cheers guys :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...