Jump to content
SAU Community

Recommended Posts

was at a mates cusins house the other day and he was showing off his new r34 GTR. he was reving it on idle and he was doing that thing in 2f2f where the R34 is pumping out nos gases into the crowd.

absolute stunner looked insane. i was wondering what kind of work is involved in doing this and how expensive?

ill try get a vid of it next time, honestly hottest thing ive seeen.

if u guys dont know what i mean check this vid out (i know its real corny but it gets to the point)

http://www.youtube.com/watch?v=C27BjrjDkks...ted&search=

Edited by anDru
Link to comment
https://www.sau.com.au/forums/topic/167170-nos-spray/
Share on other sites

I still don't get the point of venting valuable nitrous to the air, other than bleeding the system of air... and if it was supposedly only for that, then it shouldn't last that long anyways.

If you want it purely for wank factor, then just get a compressed tank of anything (diving tanks?) and plumb it up with a solenoid... then when you press a button it'll "vent".

Link to comment
https://www.sau.com.au/forums/topic/167170-nos-spray/#findComment-3093269
Share on other sites

Get a Co2 purge kit mate, same as nos but not as costly .. obviously is just tanks of co2 linked to a purge/overflow hole which blows it out the side ..

nos wont be in the system so u have no nos benifit.. but u have the wank ability and thats whats important rite :P

AKA fake nos

Edited by DECIM8
Link to comment
https://www.sau.com.au/forums/topic/167170-nos-spray/#findComment-3093520
Share on other sites

was at a mates cusins house the other day and he was showing off his new r34 GTR. he was reving it on idle and he was doing that thing in 2f2f where the R34 is pumping out nos gases into the crowd.

absolute stunner looked insane. i was wondering what kind of work is involved in doing this and how expensive?

ill try get a vid of it next time, honestly hottest thing ive seeen.

if u guys dont know what i mean check this vid out (i know its real corny but it gets to the point)

http://www.youtube.com/watch?v=C27BjrjDkks...ted&search=

eh? last time i checked this wasnt ns.com :wave:

Link to comment
https://www.sau.com.au/forums/topic/167170-nos-spray/#findComment-3093902
Share on other sites

its a purge kit for the nos!

kind of pointless if you dont have a nos system althou if you just wanted it for looks, you could buy the purge system and hook it up to a c02 bottle and it would do the same thing. add some die into the line and you will get the colour too

how much are these purge systems? any idea wat sort of ppl can do this? also i know its illegal to have NOS injected into your car, but is it legal to vent it like this?

Link to comment
https://www.sau.com.au/forums/topic/167170-nos-spray/#findComment-3094232
Share on other sites

how much are these purge systems? any idea wat sort of ppl can do this? also i know its illegal to have NOS injected into your car, but is it legal to vent it like this?

Its illegal just to have nitrous in the car

Let alone use it or try and get 15yr old girls excited

Link to comment
https://www.sau.com.au/forums/topic/167170-nos-spray/#findComment-3094522
Share on other sites

how much are these purge systems? any idea wat sort of ppl can do this? also i know its illegal to have NOS injected into your car, but is it legal to vent it like this?

It probably isn't illegal to vent it if it isn't hooked up to the engine at all, the main problem is that it is a waste of NOS (which, correct me if i'm wrong, isn't cheap). If you are going to all that effort and spraying out proper NOS, wouldn't it be better to hook it up so it actually does something, then when people call you an absolute wanker, you can whip out a vid of you actually using NOS on the track or something.

Link to comment
https://www.sau.com.au/forums/topic/167170-nos-spray/#findComment-3094855
Share on other sites

so how do you transport it?

Law:

"a road registered vehicle fitted with nitrous oxide must have the

system modified so that the bottle is properly secured in the brackets

provided and isolated from the engine (disconnect the main braided line

from the bottle), and the supply line to the engine is physically blocked

off with an approved A-1 Performance disarming kit whilst the vehicle is being street

driven."

Link to comment
https://www.sau.com.au/forums/topic/167170-nos-spray/#findComment-3094871
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...