Jump to content
SAU Community

Wedsport Sa70's

Snowman

By Snowman,
in Victoria

 Share

Recommended Posts

Snowman Grand Master

Snowman

Posted
Posted

Hey guys - anyone out there have a set of the Wedsport SA70's in 18's? I'm thinking of getting some but I need to test fit a set before I order them to make sure they fit over my brakes.

I know for example in 18's that rims like LMGT4's and TE37's do fit but rims like CE28's, Volk Challenge and the stock R34 GT-R rims DON'T fit so I really don't want to order something from Japan only to have them not fit.

So if anyone has a set and cen let me test them out that would be super.

Cheers.

sa70_car_02.jpg

Link to comment
https://www.sau.com.au/forums/topic/167887-wedsport-sa70s/
Share on other sites
Snowman Grand Master

Snowman

Posted
  • Author
Posted

It's because Jack runs 365mm rotors. If I ran the propper AP rotors which are also 365mm then I wouldn't have this issues.

But it is because I set up to run the 375mm rotors from the V8SC that I have this problem. Same as Ben and Aaron have with the Harrops with the 382mm rotors. I think you'll even find Jacks CE's were originally Bens and he didn't discover they didn't fit until he'd already bought and paid for them.

So the problem is the internal diameter of the rims.

Link to comment
https://www.sau.com.au/forums/topic/167887-wedsport-sa70s/#findComment-3105404
Share on other sites
Snowman Grand Master

Snowman

Posted
  • Author
Posted
They're not the Weds mate but I'm happy for you to trial fit the RE30's....

Thanks mate but that doesn't help me with my problem - mainly being the weds are half the price of the RE30's. (which is a shame as I really like the RE30's)

Link to comment
https://www.sau.com.au/forums/topic/167887-wedsport-sa70s/#findComment-3105479
Share on other sites
Roy Grand Master

Roy

Posted
Posted

Creful with the designations, some WEDS are cast, soem are forged even though they look the same, the difference is with prefixes etc. My ones are the old series forged.

Leewah has some 18: Weds, though not sure if cast or forged. (Difference betwen a little over 2k new and $4500 :blink:)

Link to comment
https://www.sau.com.au/forums/topic/167887-wedsport-sa70s/#findComment-3105590
Share on other sites
Snowman Grand Master

Snowman

Posted
  • Author
Posted

All SA70's are cast. However I understand there are 2 types of casting - gravity cast and upcast (pressure cast) and the SA70's are made the latter method.

Upcast is a LOT better than gravity cast even though it isn't as good as forged. But upcast has the strength - just not the lightness of forged rims. But the SA70's are still only about 9.5Kgs compared to the SA90's (which are forged) which are about 8.0KG.

Link to comment
https://www.sau.com.au/forums/topic/167887-wedsport-sa70s/#findComment-3105807
Share on other sites
saff_cossie Grand Master

saff_cossie

Posted
Posted
All SA70's are cast. However I understand there are 2 types of casting - gravity cast and upcast (pressure cast) and the SA70's are made the latter method.

Upcast is a LOT better than gravity cast even though it isn't as good as forged. But upcast has the strength - just not the lightness. But the SA70's are still only about 9.5Kgs compared to the SA90's (which are forged) which are about 8.0KG.

Cool, thanks for the info :blink:

Link to comment
https://www.sau.com.au/forums/topic/167887-wedsport-sa70s/#findComment-3105815
Share on other sites
Leewah Veteran

Leewah

Posted
Posted

Mine are forged. It's stamped on the rim :(

Creful with the designations, some WEDS are cast, soem are forged even though they look the same, the difference is with prefixes etc. My ones are the old series forged.

Leewah has some 18: Weds, though not sure if cast or forged. (Difference betwen a little over 2k new and $4500 :P)

Link to comment
https://www.sau.com.au/forums/topic/167887-wedsport-sa70s/#findComment-3106197
Share on other sites
JAGR33 Grand Master

JAGR33

Posted
Posted

Frank has the same weds as Leewah, and Frank has AP 6 pots with 365mm rotor..

Snowy, its hard decision to make, i guess you got no choice but to find someone locally that has them to trial fit them, especially with the size of rotors you have....

Link to comment
https://www.sau.com.au/forums/topic/167887-wedsport-sa70s/#findComment-3106869
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Duncan
      spot the stagea

      By Duncan · Posted

      roof rail delete used to be a thing, they were made locally for a while too
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • GTSBoy
      R34 25GT Engine Light 21

      By GTSBoy · Posted

      If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...