Jump to content
SAU Community

Recommended Posts

i know i know, i tired to search but when i typed in "r33 sub" so much random shit came up it caved my head in.

so just quickly, generaly speaking, what is the biggest sub you can fit into the boot of an r33?

im thinking about getting a half decent 10 inch in a sealed box, would this thing be alright?

http://cgi.ebay.com.au/2007-SOUNDSTREAM-PI...1QQcmdZViewItem

cheers brudda's

Link to comment
https://www.sau.com.au/forums/topic/169028-biggest-sub-to-fit-in-r33-boot/
Share on other sites

u can probably fit 2 15" subs, but u wont have a boot.

It depends wat your looking for. If u want spl or sq. For sq, 10-12" sub in sealed box would be most responsive. Whereas for spl, 12-15" ported is the way to go. Of course u can have a ported box thats still good in sq. It depends wat woofer your getting and wat its reocmmended box size is

Get some DD"s

Edited by mark_sudakov

yar, im thinking if i get a large sub them everything in my car will rattle like the spoiler and so on.

so sound quality rather then SPL would be the better option.

if anyone has a single sealed 10-12 in their boot could you please post a pic so i can sus out how much room they take up. =) cheers

Try dual 18" kicker subs .. if you want the biggest .. if your looking at any dance music will sound like shit tho!

bigger sub runs slower and ussually out of time .. depends on sub tho but 12" is best .. Just buy a top of the line sub .. I.E JL W7 or Fusion NV series

BIG BASS

not everyone has a grand to spend on a sub...

i tried to design a box for 2 15 inch speakers, but the slot port box was bigger then the boot, would have had to be made IN the boot, and would need to be disassembled to get it out... not to mention i couldnt get to the battery... (damn my fancy design and high standards :unsure:)

2 12's seem to be the go in skylines... ive noticed with skylines too most of the audio stays inside the car :D

There are a few installs in this thread

http://www.skylinesaustralia.com/forums/in...=159050&hl=

I listened to a 10" and 12" sub in the audio store and the 12" had a fair bit more bass and was only about $10 more or something like that so made my decision easy.

Whos sub cost $1000? mine cost me $300 :) NEW :thumbsup::):P

Why not one 12" and two 10" :D check out caraudioaustralia.com.au for cheap second handers :D

if you can find me 2 12" W7's for $300 each, i will personally give you $100 for doing it...

2x10" JL's for me.

Image005.jpg

They're not actually in the box here, but they juuusssssst fit up on the section next to the battery. I'll take more detailed/useful pics if You want. I can get the space saver in&out no probs, but I've gotta trim the bottom of the box to get an inflated full-sized tyre past.

I listen to a fair bit of rock & metal, so I really dig the tight, punchy bass from the 2x10's, plus they still push out plenty of SPL down low for hip-hop & Dance! - Volume is plentiful, with only 50Wrms per sub ! ! ! ! :kiss:

oh, word: if U mount a sub box under the parcel shelf, it CANNOT touch the HICAS box, which is slung under there.

Try dual 18" kicker subs .. if you want the biggest .. if your looking at any dance music will sound like shit tho!

bigger sub runs slower and ussually out of time .. depends on sub tho but 12" is best .. Just buy a top of the line sub .. I.E JL W7 or Fusion NV series

BIG BASS

probly one of the biggest missconceptions in car audio. group delay has more to do with box design, physical weight of the cone would have basically inaudible effects, if driven off the same amp at same impedence/power etc

if you are only looking at 10" subs then there wont be a problem. Depending on how you mount it, you can go a lot bigger and fit multiple in. Depends if you want to go a box, or a custom install...either way you wont have much boot space left.

If you relocate the battery etc from behind the rear seat you can put a box in there to keep some boot space. That all seemed to hard for me, but the result is that I could fit a set of golf clubs in the boot it I wanted to and not much else.

Also to help with sound travel into the cabin, remove the metal plate behind the rear seat :P

Can't you just unbolt it, and move it if its in the way?

If You're comfortable that You know how HICAS works well enough, that You can relocate the control Box and not mess with the sensors in it, then by all means . . . . . knock yourself out Tiger ! !

Here's the work of art, that is My sub Box:

Image049.jpg

Image048.jpg

Image047.jpg

The big relief on top is to clear the HICAS Box, As U can see it's a TIGHT fit to get the 2x10" cones in, that box runs the entire height of the under-parcel-shelf area. It's 38 Litres, Which gives a flat response curve down to 70Hz, where it starts dropping away (like most sealed boxes do) to lose 3db at 45hz, & more below there. That's okay tho - I just give the 45hz boost on the Amp a lil' tweak to compensate. NoiCe ! !

If You're comfortable that You know how HICAS works well enough, that You can relocate the control Box and not mess with the sensors in it, then by all means . . . . . knock yourself out Tiger ! !

Here's the work of art, that is My sub Box:

Image049.jpg

Image048.jpg

Image047.jpg

Lol, I love it, i can imagine the strain, by the belted in parts on the back. I had to belt in a 15" under the parcel shelf of a VL.

Here's my mates boot, labor was a carton of piss as far as i know

post-35240-1179908253_thumb.jpg

Here's mine, gonna tidy it up a bit one day, the floor is all sunken, so prob make a fake floor and fit the subs closer to the walls using the same boxes, apparently right litreage. (doesn't look even, I'm a neat freak when it comes to that sorta shit.

post-35240-1179908117_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That R31 was so cool. Only did Orange Park once. Scared the hell out of me.
    • Selling my TE37SLs since I've switched to smaller wheels.  They're for sale in Japan but it's pretty simple to send them overseas; USA excluded, since JPPost isn't sending there at the moment. Specs Front: 18x9.5j +22 5x114 Rear: 18x10j +20 5x114 Price: 320,000 JPY/ 3,285 AUD (current FX rate) Condition: a few scratches here and there, no bends, distortions or cracks.  Tires will not be included for international buyers, I'll get them dismounted before shipping. They're currently listed on yahoo auction and will be shipped in Japan with the tires if they sell here. Shipping costs to Aus: EMS (1-2 weeks): AUD 1,175 (current FX rate) Sea (2 months): AUD 460  (current FX rate)
    • The alloy coolant reservoir has a sight glass, so as long as I can see coolant in the sight glass it's GTG, as for PS, it isn't anything catastrophic if it gets low, and as it hasn't lost a drop since I have owned the car I cannot see it being an issue, even after putting the "big block" 2.5 in....LOL The only time it gets slightly messy is at oil changes, as the oil filter sits above the frame, and I need to use a plastic bottle with its bottom cut off to catch the flow when loosening the filter
    • Good on you for taking on the job, but it is a big one. Even if you have bolt on manifold and turbo, you will need: Post throttle pressure source to boost controller to wastegate (and FPR, and ECU/MAP sensor) Pre throttle pressure source to top of BOV(s) Oil feed - you can take that from the standard port in the middle of the block Oil return to block under the turbo - this is much trickier than it seems to route a decent/wide pipe past the manifold. You really can't use rubber hose because it is way too hot there, and also the oil out of the turbo core is a bit frothy so it needs to have a decent diameter Water feed - you can take that from the standard port in the rear of the block. Water return - mine runs to a T into the heater box return, just make sure you don't create a high point making bleeding hard. All of those lines should use 200 series style teflon braided hose with heat shielding because everything needs to be routed past the manifold. Also a turbo beanie is a really good idea to minimise the chance of the car catching fire (under bonnet lining in particular) You also need to decide a cam cover breathing solution as well, will you vent externally via a catch can (probably illegal) or return to the intake (plumbing required and can oil up everything over time) Keep in mind the intake and exhaust piping in the engine bay will be custom so you either need to be able to fab ally and steel or have someone you can get a car that isn't running to. Get the wideband fitting welded into the dump pipe at the same time. Also, just my opinion, a screamer pipe attracts attention and doesn't add power, I'd plumb it back if you want to be allowed to keep the car on the road. BTW do you know anything about how healthy the motor is, and what power you are targeting? Doubling or tripling the factory power on an unknown motor is a little risky. Also fuel system will need some attention (pumps, high current hanger, direct power and earth feed, injectors etc)
×
×
  • Create New...