Jump to content
SAU Community

Recommended Posts

I searched around without success.

I've reached about 95% on my AFMs and I'm looking to upgrade. I have a PFC about to go in.

Z32 appears to be the standard upgrade, but that's larger then I need. I was wondering if RB25DET AFMs would be a good upgrade. I gather two 25DET AFMs will flow more then the R32 GTR items????

Anyone done this change? Or any other suggestions.

Link to comment
https://www.sau.com.au/forums/topic/169320-25det-afms-in-gtr/
Share on other sites

I'd like to know the answer as well..

I searched around without success.

I've reached about 95% on my AFMs and I'm looking to upgrade. I have a PFC about to go in.

Z32 appears to be the standard upgrade, but that's larger then I need. I was wondering if RB25DET AFMs would be a good upgrade. I gather two 25DET AFMs will flow more then the R32 GTR items????

Anyone done this change? Or any other suggestions.

Just get twin Nismo AFM's.

The are a Z32 sensor, in a stock AFM housing.

Therefore they bolt up to the factory piping. This is a key factor as it saves $$$ having to redo all the cooler piping and a lot of dicking around.

The Nismo AFM's are the next step up from the stock RB26 AFM's

Re-doing the afm piping isn't an issue as I was looking at reolacing the lot with stainless, just interested in if the rb20/25 afm was a workable upgrade or not.

Considering that I will only be paying for the materials, not the fabricating, the rb20/25's might work out cheaper than buying a pair of nismo afm's.

james.

rb20 and rb25 afm are same size and same calibration.

Rule of thumb for Air Flow meters RWKW & Engine BHP

added nismo afm onto paulr33's table

------ ---- OD ---- RWKW ---- RWKW ---- BHP ------ BHP

No of AFM's ---- ------- 1 -------- 2 -------- 1 -------- 2

RB26 ------ 65 ------ 149 ------ 299 ------ 271 ------ 474

RB20/25 --- 80 ------ 226 ------ 453 ------ 376 ------ 683

Z32 ------- 80 ------ 255 ------ 511 ------ 415 ------ 763

Nismo----65------------------570

Q45 ------- 90 ------ 302 ------ 605 ------ 479 ------ 890

Edited by andz
I searched around without success.

I've reached about 95% on my AFMs and I'm looking to upgrade. I have a PFC about to go in.

Z32 appears to be the standard upgrade, but that's larger then I need. I was wondering if RB25DET AFMs would be a good upgrade. I gather two 25DET AFMs will flow more then the R32 GTR items????

Anyone done this change? Or any other suggestions.

Yes,

I have put 2 RB25afm's on my gtr...bought for $200 dollars...second hand off a member of this forum...got them fitted...modified old intake.

Had to buy 2 adaptors from Just Jap Sydney $80.....total...

So was in for cams and retune anyway...so fitting was $200(That is cutting the Tomie pipes that were there...installation of some adaptors as mentioned and

some silicone hose and clamps....it all looks good...total cost..

$480.....

If I knew this before...would have bought the Nismo items.......direct bolt on...lol...I did not need new plugs.....

Z32's require...plug adaptors.

If I find my post I will give you a link.

added nismo afm onto paulr33's table

------ ---- OD ---- RWKW ---- RWKW ---- BHP ------ BHP

No of AFM's ---- ------- 1 -------- 2 -------- 1 -------- 2

RB26 ------ 65 ------ 149 ------ 299 ------ 271 ------ 474

RB20/25 --- 80 ------ 226 ------ 453 ------ 376 ------ 683

Z32 ------- 80 ------ 255 ------ 511 ------ 415 ------ 763

Nismo----65------------------570

Q45 ------- 90 ------ 302 ------ 605 ------ 479 ------ 890

Nismo/Z32 are identical. So not sure what your getting at there.

And that above table is wrong.

I made 270rwkw on PULP with a Z32 and it was nowhere near maxing out. Same as a lot of other peoples.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...