Jump to content
SAU Community

Recommended Posts

The LSD is a limited slip differential. The diff or diffs (in a GTR) have there own drain and fill up point, as the oil needs to be around the diff's crown and pinion wheels for lubrication.

got it mate.

actually my 1st to 2nd gears been crunching after a clutch change, i'm not sure if oils play an intergral part but was thinking to change it anyhow considering how long it has been in there. Bought 5 liters of motul 75w140, im sure i could use 2 bottles in the LSD, is it okay to put the rest to the gearbox?(im not sure if 75w140 is the correct grade for the gearbox, car is a light modded gtst)

  • 1 year later...

Just did mine. The bolts are absolute C U Next Tuesdays to get off. I used a 1/2" Ratchet and a small pipe as a breaker bar, had to push myself on the ramps to get enough force to get them turning.

Another tip, head to supercheap and buy a $6.99 syphon, it's the best $7 you'll spend and made the process of filling up the gearbox a painless, fast task.

I used VMX80 and the difference is unbelievable, it feels like a new box.

Highly recommended to anyone, just ensure you have the right tools because you'll only end up frustrated

I was worried i would damage them, you need to make sure the ratchet head is firmly inserted otherwise you risk rounding it.

If you've rounded them you might be in trouble, i couldn''t believe how tight they were. There was also lock tight applied to both bolts which made it even tougher

I use Redline MTL in the 5 spd, had rough shifts now all sorted out. and yes easier to pour thru the shift area then use pump, since I had the shifter off anyhow for a new rubber boot seal..lol

tried Syn power first, dumped it out the same day horrible stuff.

and use "smirf blood" ...shockproof in the Nismo LSD on the R34, works a treat , just looks odd , so thin and blue...lol diff hooks up so much better now.

can get a GB on All Redline oil now if interest arises in the future ?

  • 11 months later...

I almost did that too trying to get it off, it never did budge. Luckily there was a temp sensor on the r34 gtt at the same level as the filler plug, so my mechanic (who knew fk all about skylines) used that.

There is a diy on temoving the gearstick, cant remember where i found it though. When looking through the diy's, remember a shortshifter installation will have the same initial steps to take the gearstick off.

  • 3 months later...
  • 1 month later...

pics don't load in the link :(

I know, found the same post on another website with google same problem, it's a few years old so the pic links have all gone dead confused.gif

Will be trying this on the weekend and will take some pics as I go though I think I will be filling from inside the car.

Found the gearstick removal to get started yes.gifhttp://www.skylinesaustralia.com/forums/topic/21079-fitting-a-short-shifter-r33-gtr-lots-of-pictures/

  • 2 years later...

hey guyschanged my gearbox oil this wkend - seems to have made a nice difference especially gear changes higher up the rev range (ie: when booting it). Heres the link on my site below...anthonymcgrath.co.uk - changing your gearbox oil

That link is doesnt work, got another 1?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Given you're running a 2.8 and my 2.5 is not really like for like, I suspect there could be a bit more timing you could give it. What is the kW yield per degree you're putting through it? Here's my E85 map to give you an idea, where it was I could still get another 3~4kW per degree thrown at it.  
    • It turns out that Setrab make a fan specifically for the oil cooler which is great and I've installed it with minimal swearing. I removed my 2x 12in push fans from the front of my aircon condenser and wired them into this. My main thermo fans kick on when I use the aircon anyway and would effectively already be working as puller fans through the condensor which is infront of the rad. The push fans (understandably) didn't really do much in the config they were previously in so now they're out. Now we're on to the "Oil fan doesn't really do much either!". Yes I'll duct it next if it does nothing in heavy use which it shouldn't. But hey, the object exists and fits great and is cool. Let me have this. The car is still in the "do my fittings leak oil now? do my wheels actually rub?" phase. I did a spirited drive on them and didn't hear or feel anything. Then I got back home and noticed there were grind marks on the inside of the rims, though I couldn't see where they were touching I got out the grinder and attacked the suspects. Note: I do not know how to use a grinder. Then I realised I had dragged my new rims across my concrete driveway before I did this drive. I didn't think I had damage at that time when I briefly looked...... but remembered this occurred after I did all the angle grinding. The grinding on the wheels in some very specific spots. It's not around the whole rim for example, which lines up with dragging it across concrete more than hitting a suspension component for even 1 full rotation. So everything is currently painted and taped up and I need to test it some more to see if it really IS rubbing, but from inside the car it doesn't feel like it is. In other news I attempted to do a before and after comparison of the heads/cam upgrade thing. Dynos lie, everything is in different measurements. Here is the data from the sandown back straight. Car go faster than before. Vroom vroom.
    • Here's my base ignition. +3 correction to redline when shooting water/meth which is always on. Looking at my old ignition table, I should be able to add 1-2 degree's next time I'm on the dyno.  Let me know your thoughts. 
    • Given what I know now - same haha, but this was 12 years ago with second hand 740cc Nismo injectors in my S15 daily, I was too busy hunting elsewhere for the issue to even look at the injectors, running through some cleaner was a happy coincidence haha
    • Not a terrible idea. But if I ever had concerns that my injectors were sufficiently dirty to be causing me a problem, they would be out of the engine and onto the actual injector cleaner/testing bench.
×
×
  • Create New...