Jump to content
SAU Community

Recommended Posts

hey all

got a new set of rims measuring 17x8 front and 17x9 rear.

whats the best street tyres to get at the moment?

im thinking 235/45/17 at the front and 255/45/17 at the rear but ist possible to have 265 or even 275 for the 9" rear rims?

its a daily driver so im not interested in street legal semi slicks.

yeah which brand and model tyres would you recommend?

say for a budget of around $1500.

any advice is much apreciated. thanks.

Edited by BaysideBlue
Link to comment
https://www.sau.com.au/forums/topic/169619-widest-possible-tyres-on-17x9-rims/
Share on other sites

you can fit 265's onto a 9" rim no problems. However it won't provide you with as much latteral grip as a 245 or 255 tyre as there will be a lot more flex in the tyre due to the way it fit's onto the rim.

your idea of 235 fronts and 255 rears is perfect IMO.

for which tyre best suits read the tyre thread at the top of this page :)

depending on brand of tyres you go for you may be better off going for a 225 on the front and a 235 on the rear.

if you go for cheap brand tyres then go for a 275 rear, it will fit.

but if you go something quality like a S-03 Bridgestone you will only need 225 front and 235 rear

i have 265 on my 9" inch rims looks good as far as handling goes I'd probably go 235 or 245. I picked up 265's for 160 each there federals so not the best tyre but good price :) be careful if you go 265's companies try charge you through the ass as the tyres are hard to come across

but if you go something quality like a S-03 Bridgestone you will only need 225 front and 235 rear

Why? why not go 235/255 with good tyres, why would you get skinnier tyres when you go to a better tyre? ontop of the fact 225's on a a 9" rim look retarded.

I've got 255's all round on my GTR with 17x9 rims. perfect fit, tyre lines up with the edge of the rim exactly.

Why? why not go 235/255 with good tyres, why would you get skinnier tyres when you go to a better tyre? ontop of the fact 225's on a a 9" rim look retarded.

I've got 255's all round on my GTR with 17x9 rims. perfect fit, tyre lines up with the edge of the rim exactly.

i also have 255 all round on 18x9 and they are spot on tyre fit i reckon

I would go a 225 on the front and 235 rear. or if you want you can go 235 front and 245/255 (depends on availability).

Amongst my cars I've had:

235 all round on 9inch rims (GTR)

245 all round on 9 inch rims (GTR)

255 all round on 9 inch rims (GTR)

235 all round on 9inch rims (GTST)

225 front (i think, they may be 235) on 8 inch rims and 255 rear on 9 inch rims (soarer).

the 255s are ok on the 9, but I reckon 235 or 245 will be better (a lot depends on tyre brand though).

If you are putting them on a skyline and you dont want your speedo to be out the closest match to stock (205/55/16 225/50/16) is 255/40/17

245/40 is close as well but 245/45 is by memory 3.3% too fast.

I currently have 245/45 but have always in the past had 255/40, i think this is a better size than the 245s which have a taller sidewall but get slightly stretched across the rim.

I believe stock r33gtr is 245/40 but most owners just replace with 245/45 due to availability.

265s usually bulge out a bit on 9inch rims, doesnt look good IMO and probably allows for a bit more sidewall flex.

Read the tyre thread for opinions on tyres. With that budget you can get top of the range street tyres so it just depends on what compromise you want.

If you are putting them on a skyline and you dont want your speedo to be out the closest match to stock (205/55/16 225/50/16) is 255/40/17

245/40 is close as well but 245/45 is by memory 3.3% too fast.

I currently have 245/45 but have always in the past had 255/40, i think this is a better size than the 245s which have a taller sidewall but get slightly stretched across the rim.

I believe stock r33gtr is 245/40 but most owners just replace with 245/45 due to availability.

265s usually bulge out a bit on 9inch rims, doesnt look good IMO and probably allows for a bit more sidewall flex.

Read the tyre thread for opinions on tyres. With that budget you can get top of the range street tyres so it just depends on what compromise you want.

sure...:rofl:

I'm running 17x8 on the fronts and 17x9's on the rears .

optimal tyres settings I've found so far are 235(45 profile) fronts and 255(40 profile) for daily use.

I guess it also comes down the design of the sidewalls and the profile. I'm running Bridgestones Potenza S-02's (best tyres ever!) on the rear which have a great sidewall and tread pattern to suit wide rims (I've had 2 styles of S-02's so far and the 1st pair of 255's stretched over rims more while the 2nd pair sat evenly without stretching, Later on I found out the S-02's were designed for specific cars, 1st ones were for a Porsche 993 while the 2nd was for a HSV).

You should also really take into account the offset of the rims your running too, against the tyres your thinking of putting on otherwise you may risk rubbing your guards.

Hope it helps.

Edited by Jenius

its been covered but still to 255 on the rear, i had 9" with 255 and suited to the ground, and now i have 275 on 10 which is just as good....you dont want to stretch it, just get a wider rim.....go the 275's

If you are putting them on a skyline and you dont want your speedo to be out the closest match to stock (205/55/16 225/50/16) is 255/40/17

245/40 is close as well but 245/45 is by memory 3.3% too fast.

I currently have 245/45 but have always in the past had 255/40, i think this is a better size than the 245s which have a taller sidewall but get slightly stretched across the rim.

I believe stock r33gtr is 245/40 but most owners just replace with 245/45 due to availability.

265s usually bulge out a bit on 9inch rims, doesnt look good IMO and probably allows for a bit more sidewall flex.

Read the tyre thread for opinions on tyres. With that budget you can get top of the range street tyres so it just depends on what compromise you want.

225/50/16 112.6 sidewall (406mm wheel + 225mm = 631 diamter)

255/40/17 is 102mm (so total diameter would be 17 inch 432mm + 204mm = 636 diamter)

245/40/17 has a sidewall of 98mm (432+196 = 628)

245/45/17 has a sidewall of 110 (432+220=652)

so the closest to stock diameter is 245/40. but to be honest speedo accuracy has never bothered me a bit. the speedo is only accurate to about 10% to begin with anyway.

and no, standard 33 GTR size is 235/45/17 not 245.

225/50/16 112.6 sidewall (406mm wheel + 225mm = 631 diamter)

255/40/17 is 102mm (so total diameter would be 17 inch 432mm + 204mm = 636 diamter)

245/40/17 has a sidewall of 98mm (432+196 = 628)

245/45/17 has a sidewall of 110 (432+220=652)

so the closest to stock diameter is 245/40. but to be honest speedo accuracy has never bothered me a bit. the speedo is only accurate to about 10% to begin with anyway.

and no, standard 33 GTR size is 235/45/17 not 245.

Yeah ~3% is not enough to bother me either which is why i went for the 245/45s... and as you say speedo only has to be within 10%, but i dont believe that the stock 33 gtr tyre size is 235/45/17 i am sure it is 245/ either 40 or 45 as mentioned by t04gtr.

Speaking of wrong compliance stickers i have one on my own car, it states that 255/40/17 is a standard size.

seems I could be wrong. I was just remembereing the japanese sticker on the door jamb on my 33 GTR, BUT my memory is not that flash. I would say that call was 50% memory, 50% talking out of my arse.

Is't a good time to get Bridgestone S-03s? They are due to be replaced soon and are on special at the moment.

I've got a quote for 255/40ZR17 94Y $410 a tyre

and 225/45ZR17 91Y $305 each

both rolling diameter 636mm

in terms of price and performance, are there better value alternatives at the moment?

cheers

Is't a good time to get Bridgestone S-03s? They are due to be replaced soon and are on special at the moment.

I've got a quote for 255/40ZR17 94Y $410 a tyre

and 225/45ZR17 91Y $305 each

both rolling diameter 636mm

in terms of price and performance, are there better value alternatives at the moment?

cheers

I think that all the higher end bridgestones are overpriced, and if those prices you quoted are 'specials' then that proves my point :P

There are a few similar tyres that you can get for a fair bit less. Dig up motor magazine tyre test but off the top of my head but if i were looking at that type of tyre ring around for:

Dunlop sp-sport maxx

Falken fk-452

Falken rt-615 (higher performance worse treadwear)

Goodyear Eagle F1 GS-D3

All of those tyres have similar performance to the S03 but cost less.

Tempe has the 615s in 225/45/17 for ~$275, and you can get the sport maxxs for a good price right now from a few places in 235/45.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • perhaps i should have mentioned, I plugged the unit in before i handed over to the electronics repair shop to see what damaged had been caused and the unit worked (ac controls, rear demister etc) bar the lights behind the lcd. i would assume that the diode was only to control lighting and didnt harm anything else i got the unit back from the electronics repair shop and all is well (to a point). The lights are back on and ac controls are working. im still paranoid as i beleive the repairer just put in any zener diode he could find and admitted asking chatgpt if its compatible   i do however have another issue... sometimes when i turn the ignition on, the climate control unit now goes through a diagnostics procedure which normally occurs when you disconnect and reconnect but this may be due to the below   to top everything off, and feel free to shoot me as im just about to do it myself anyway, while i was checking the newly repaired board by plugging in the climate control unit bare without the housing, i believe i may have shorted it on the headunit surround. Climate control unit still works but now the keyless entry doesnt work along with the dome light not turning on when you open the door. to add to this tricky situation, when you start the car and remove the key ( i have a turbo timer so car remains on) the keyless entry works. the dome light also works when you switch to the on position. fuses were checked and all ok ive deduced that the short somehow has messed with the smart entry control module as that is what controls the keyless entry and dome light on door opening   you guys wouldnt happen to have any experience with that topic lmao... im only laughing as its all i can do right now my self diagnosed adhd always gets me in a situation as i have no patience and want to get everything done in shortest amount of time as possible often ignoring crucial steps such as disconnecting battery when stuffing around with electronics or even placing a simple rag over the metallic headunit surround when placing a live pcb board on top of it   FML
    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
×
×
  • Create New...