Jump to content
SAU Community

Recommended Posts

There is a buyers guide Stickyed up the top I think.

My tip... look out for rust behind the door mirrors.

what is your petrol economy like how many l/100km i am going to be driving it every day to run a mobile service

Link to comment
https://www.sau.com.au/forums/topic/170136-buying-a-stagea/#findComment-3143836
Share on other sites

what is your petrol economy like how many l/100km i am going to be driving it every day to run a mobile service

Use the SEARCH button. I have and this is what i've come across.

Driven carefully i.e. off boost most of the time with engine running well-

Around town 14-15l/100km

Highway 10-11l/100km

Link to comment
https://www.sau.com.au/forums/topic/170136-buying-a-stagea/#findComment-3143853
Share on other sites

There is a buyers guide Stickyed up the top I think.

My tip... look out for rust behind the door mirrors.

haha and what should he do when he finds it? because its pretty definite he will.. :stupid:

Haven't seen a stagea without the TINY spot of rust behind the passenger mirror. Not a big deal at all - just something to be aware of. So saying I still haven't done anything about mine, after 1 year of owning it...

it shouldn't put you off buying one. Stageas are VERY reliable as you can tell by the lack of requests for help fixing problems on this forum. Most "help me" threads are self-inflicted in some way, and by that I mean that very few problems would relate to a stock stagea :laugh:

Edited by pixel8r
Link to comment
https://www.sau.com.au/forums/topic/170136-buying-a-stagea/#findComment-3143944
Share on other sites

I got mine removed and resprayed when the bodykit was done. I belioeve that would be the best way to do it. And sometimes that patch of rust can be bigger than you think, pull the mirror off and have a look first. Not in all cases but in some it can spread.

Link to comment
https://www.sau.com.au/forums/topic/170136-buying-a-stagea/#findComment-3145048
Share on other sites

Defiantly get a compression and leak down test if you can, it'll show you how the actual motor is faring after 8-10yrs of use.

Basically same things as a skyline, if you can looks for shaft play in the turbo as well.

Link to comment
https://www.sau.com.au/forums/topic/170136-buying-a-stagea/#findComment-3145236
Share on other sites

You can buy bottles of rust inhibator from hardware stores.

If you are after a quick fix for the rust problem, you could just brush this on under the mirror and inside the door. Then when it's dry, put a layer of paint over it.

Should stop the growth of the rust spot for a few years

Link to comment
https://www.sau.com.au/forums/topic/170136-buying-a-stagea/#findComment-3145900
Share on other sites

You can buy bottles of rust inhibator from hardware stores.

If you are after a quick fix for the rust problem, you could just brush this on under the mirror and inside the door. Then when it's dry, put a layer of paint over it.

Should stop the growth of the rust spot for a few years

cheers, thanks for the info!

its been on my "todo" list since I got the car (um...about 14 months ago) - really need to get onto it...

Link to comment
https://www.sau.com.au/forums/topic/170136-buying-a-stagea/#findComment-3146261
Share on other sites

  • 2 years later...
cheers, thanks for the info!

its been on my "todo" list since I got the car (um...about 14 months ago) - really need to get onto it...

I let mine go and the rust spot turned into bubbling paint about an inch under the mirrors. After purchasing, rust proofing and installing two doors my advice is don't wait. Do it now.

Link to comment
https://www.sau.com.au/forums/topic/170136-buying-a-stagea/#findComment-5168995
Share on other sites

check under the boot seal too,stageas love to rust there also a couple of guys have had trouble with rust under the roof racks. i hit mine pretty hard with a four inch grinder then rust converter until its all changed colour ,then paint it. Also the electric mirrors can be problematic once they get older but its just a case of pulling them apart and cleaning them up a bit.

Link to comment
https://www.sau.com.au/forums/topic/170136-buying-a-stagea/#findComment-5169118
Share on other sites

You can't fix the rust under the mirrors problem from the outside. There is a good tutorial on pulling off the door cards and pulling out the bit of foam that soaks up water and either replacing it with something water resistant or drying it out and waterproofing it.

Link to comment
https://www.sau.com.au/forums/topic/170136-buying-a-stagea/#findComment-5170518
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...