Jump to content
SAU Community

Recommended Posts

Hey fellas,

Just went on a cruise with a few Skyline owners last month. Noticed something really funny. I own a 1996 R33 GST-T.

Now, there were 4 cars that came (funny enough all R33's) - one was a R33 series 1, another a R33 series 2, another a R33 series 2 and myself... well, I don't know what the hell I am.

I got series 2 headlights, series 2 interior, steering wheel, carpets, series 2 shape BUT I got series 1 dash, only 1 drivers airbag? What's going on, my friend reckons mine is a so-called series 1.5 - basically Nissan released the series 1 in 1995, than late 1995 - early 1996 apparently they released an improved version of the R33 series 1 hence I think mine is a cross-between a series 1 & 2. It's amazing out my friends series 1, my series "1.5" and my other friend's series 2 differs.

Anyone seen similiar? Now, just to make it slightly more squarzy... I drive my friend's series 1 and it actually handles slightly different than my car. I jacked up our cars, and I think my vehicle has slightly better stock suspension? What the hell?

Some specs of all three would be lovely fellas.

Regards,

Link to comment
https://www.sau.com.au/forums/topic/170806-r33-series-15/
Share on other sites

ask,(powerplay imports) in drummoyne,nsw

they got a web site ,powerplay imports

they deal in everthing skyline

Thanks mate, but I live in VIC and was just after an informal heads-up really.

thanks

Link to comment
https://www.sau.com.au/forums/topic/170806-r33-series-15/#findComment-3152265
Share on other sites

I'm not sure if it's an official bout the "series 1.5", but they definitely do exist. The main visual differences:

--> All series 1.5's have the series 2 rear wing (squared off one)

--> They have a series one bonnet (doesn't have the creases that the series II has)

--> The series 1.5 has a series one front bar (as opposed to the series II with the round orange&clear lights)

--> The badge on the series II is a chrome "S" on the bonnet, while the series 1.5 usually have a red "s" on the grille

--> The airbag thing which you mentioned (steering wheel is different as well im pretty sure).

I can't remember whether the series 1.5 has a series two engine. The main difference is that the compressor wheel on the series II turbo is nylon. I have heard from a series 1.5 owner that they have series II running gear, but i'm not 100% sure. The suspension, i dunno, haven't heard that there's a difference. Different cars feel different though, doesnt necessarily mean suspension is different.

Also remember that ur car, even if apparently "stock" could have had its front bar/bonnet changed sometime in its life (and suspension too...)

Link to comment
https://www.sau.com.au/forums/topic/170806-r33-series-15/#findComment-3152303
Share on other sites

Thanks guys, yeah - I guess there are a series 1.5 running around. Kinda funny but true.

Well, I got a full bodykit on mine so I guess, can't really say it's a series 1 or 2 anymore.

Thanks all again. good luck.

Link to comment
https://www.sau.com.au/forums/topic/170806-r33-series-15/#findComment-3152413
Share on other sites

yeh they got the series 1 lights, the kind that go all yellow and cloudy after a while.

not sure about mine, its a 94 but with a s2 motor and s2 spoiler, maybe its a really late 94 model cause i thought 1.5's only happend in 95 models but i could be wrong. its been known to happen.

Link to comment
https://www.sau.com.au/forums/topic/170806-r33-series-15/#findComment-3152496
Share on other sites

--> All series 1.5's have the series 2 rear wing (squared off one)

--> They have a series one bonnet (doesn't have the creases that the series II has)

--> The series 1.5 has a series one front bar (as opposed to the series II with the round orange&clear lights)

--> The badge on the series II is a chrome "S" on the bonnet, while the series 1.5 usually have a red "s" on the grille

--> The airbag thing which you mentioned (steering wheel is different as well im pretty sure).

spot on! ive got exactly everything on that list and mines a 95.

Link to comment
https://www.sau.com.au/forums/topic/170806-r33-series-15/#findComment-3152744
Share on other sites

Hmm i think mine might be a series 1.5 as well. I have everything in that list and mine is also a 95 model. Also i heard that the series 1 has this ignition pack on the top of the rocker covers at the back and the series 1.5 and on doesn't or something like that. Mine doesn't have this pack either.

Hey is there a series 3 at all. Apparently the bumper that my car had fitted to it was meant to be a factory option for the series 3 or something. Not sure about this tho but its meant to be for a series 2 or something cos it doen't fit as well as the stocker bumper.

Its a bit like a 400r bar but bit different. I have yet to see another skyline with the same bar on it.

Link to comment
https://www.sau.com.au/forums/topic/170806-r33-series-15/#findComment-3152810
Share on other sites

is it true only series 2 came out with VCT and series 1 didn't?

All 33's have VCT :P Thats why we you only need to buy one cam gear unless you have changed the camshafts and are unable to run the factory VCT.

Hmm i think mine might be a series 1.5 as well. I have everything in that list and mine is also a 95 model. Also i heard that the series 1 has this ignition pack on the top of the rocker covers at the back and the series 1.5 and on doesn't or something like that. Mine doesn't have this pack either.

Hey is there a series 3 at all. Apparently the bumper that my car had fitted to it was meant to be a factory option for the series 3 or something. Not sure about this tho but its meant to be for a series 2 or something cos it doen't fit as well as the stocker bumper.

Its a bit like a 400r bar but bit different. I have yet to see another skyline with the same bar on it.

S1 engine has the seperate ignitor box, S2 has the ignitor in the coil.

Only a S3 R33 GTR... quite possibly they have used that bar or a 40th anniversary one possibly (98 Gtst). Could even be aftermarket...

Technically there is no such thing as a 1.5........

93-94 = S1

95 = S1 This is often referred to as the 1.5 due to the S2 engine, interior & wing. Still retains S1 headlights and bonnet.

96-98 = S2

Link to comment
https://www.sau.com.au/forums/topic/170806-r33-series-15/#findComment-3152832
Share on other sites

hey all!

I have a series 1.5 and it has all those things listed aswell

Series 1.5 are 95's and maybe late 94's possibly and have S2 wing, S2 motor, also have different steering wheel to series 1 and 2 with only drivers airbag has everything elese series one ,lights, front bar, bonnet, etc

Hope this helps guys

Cheers

Link to comment
https://www.sau.com.au/forums/topic/170806-r33-series-15/#findComment-3153098
Share on other sites

Ah ok now this all makes sense. I thought my front bar must be off a GTR cos it looked so similar to ones i seen on a gtr but it is still slightly different to ones that you see on most r33's. Soon i will have the rear GTR pods fitted to my car so should look ok.

The series 3 bar that I have is okay. It kinda goes under the head lights a bit and makes them stick out over the bumper a small amount but it still looks ok i think.

Link to comment
https://www.sau.com.au/forums/topic/170806-r33-series-15/#findComment-3153442
Share on other sites

hey all!

I have a series 1.5 and it has all those things listed aswell

Series 1.5 are 95's and maybe late 94's possibly and have S2 wing, S2 motor, also have different steering wheel to series 1 and 2 with only drivers airbag has everything elese series one ,lights, front bar, bonnet, etc

Hope this helps guys

Cheers

It might have alot of the series 2 components like you have listed but there is no such thing as a series 1.5 its either a series 1 or a series 2.

Link to comment
https://www.sau.com.au/forums/topic/170806-r33-series-15/#findComment-3153572
Share on other sites

It might have alot of the series 2 components like you have listed but there is no such thing as a series 1.5 its either a series 1 or a series 2.

Yes this is correct. No series '1.5'... I know that owners want to have a proper way of describing their particular model, but Series 1.5 implies that Nissan actually released a version as such, when they didn't. They merely started making revised Series 1 models from a particular point in time and gave some of them names like 'Urban Runner/Urban Runner S', and 'Type M Active LSD' to separate them, while others were just usually badged GTS25, GTS25t Type M or GTS25 Type S... so there was no real distinction on paper from the revised Series 1s.

So theres Series 1, Series 1 (first revision), Series 2, and Series 2 (first revision). The 'first revision' models (aka Series 1.5 on SAU) were not sold as a 'Minor Change' model like the Series 2 was. The Series 2 front end (etc) was changed significantly enough to warrant the 'Minor Change/Series 2' naming, whereas the first revisions (of both series 1 and 2) were not. In Japan, model upgrades are usually spoken of as 'Minor Changes' and 'Full model Changes'... Series 1/2 minor changes to R33 -> 34 full model changes... thats it. having said that they make revisions all the time, leading up to a minor change or full model change, to boost interest in the soon to be superceeded model.

msnismo already stated when the first revision happened but I'll just list it again with months included and what was changed (basically) to make it a little clearer:

Series 1:

August 1993 - December 1994

Changes: As per usual Series 1.

Series 1 first revision:

January 1995 - December 1995

Changes: Changes to the interior and exterior were made. For the exterior, the front grille was changed to a charcoal colored one (series 1s had matching body color). The Aero front bumper and larger rear spoiler were added as options across the range. Additionally, a driver's side SRS air bag was standard equipment on all cars. (from Jan 1995)

Series 2:

January 1996 - December 1996

Changes: As per Series 2

Series 2 first revision:

February 1997 - April 1998

Changes: ABS is standardized on all cars. The front door glass is changed to a long life water-repellent glass. A rear intermittent wiper, UV blocking insulation glass, sports type AT shift knob, and the remote control entry system, etc. were made as standard to the range. (from Feb 1997)

So to answer jrocket: No there is no Series 3 (see above). Hope this cleared up some confusion. If anyones car falls outside the above, I'd say sometime along the way parts were changed/upgraded by the owner at the time.

Link to comment
https://www.sau.com.au/forums/topic/170806-r33-series-15/#findComment-3153992
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
    • When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
    • So I found this: https://www.efihardware.com/temperature-sensor-voltage-calculator I didn't know what the pullup resistor is. So I thought if I used my table of known values I could estimate it by putting a value into the pullup resistor, and this should line up with the voltages I had measured. Eventually I got this table out of it by using 210ohms as the pullup resistor. 180C 0.232V - Predicted 175C 0.254V - Predicted 170C 0.278V - Predicted 165C 0.305V - Predicted 160C 0.336V - Predicted 155C 0.369V - Predicted 150C 0.407V - Predicted 145C 0.448V - Predicted 140C 0.494V - Predicted 135C 0.545V - Predicted 130C 0.603V - Predicted 125C 0.668V - Predicted 120C 0.740V - Predicted 115C 0.817V - Predicted 110C 0.914V - Predicted 105C 1.023V - Predicted 100C 1.15V 90C 1.42V - Predicted 85C 1.59V 80C 1.74V 75C 1.94V 70C 2.10V 65C 2.33V 60C 2.56V 58C 2.68V 57C 2.70V 56C 2.74V 55C 2.78V 54C 2.80V 50C 2.98V 49C 3.06V 47C 3.18V 45C 3.23V 43C 3.36V 40C 3.51V 37C 3.67V 35C 3.75V 30C 4.00V As before, the formula in HPTuners is here: https://www.hptuners.com/documentation/files/VCM-Scanner/Content/vcm_scanner/defining_a_transform.htm?Highlight=defining a transform Specifically: In my case I used 50C and 150C, given the sensor is supposedly for that. Input 1 = 2.98V Output 1 = 50C Input 2 = 0.407V Output 2 = 150C (0.407-2.98) / (150-50) -2.573/100 = -0.02573 2.98/-0.02573 + 47.045 = 50 So the corresponding formula should be: (Input / -0.02573) + 47.045 = Output.   If someone can confirm my math it'd be great. Supposedly you can pick any two pairs of the data to make this formula.
×
×
  • Create New...