Jump to content
SAU Community

Recommended Posts

howdie all,

just wondering weather or not stretching 235mm tyres onto a 255mm rim is safe and easy?

have spoken to a few places and they seem to think thats the way to go. Also, whats a fairly decent tyre i should look for, any particular brands and types?

any help would be much appreciated!!!

cheers.

Link to comment
https://www.sau.com.au/forums/topic/170927-stretching-tyres/
Share on other sites

If by 255mm rim you mean there there is a 255 tyre on there now and it sits flush, then 235 will fit on there pretty easily (assuming 17s or 18s, the larger sizes might start struggling a little with the smaller sidewalls)

As for brands, look here.

http://www.skylinesaustralia.com/forums/in...showtopic=72923

reduced safety is the main difference between stretching a sidewall and doing it properly.

What size is the rim you want to fit it on? there are industry standards about widths and tyre manufacturers also publish recommended rim sizes

There is a heap of info in the "what tyres have you used" thread in this section - I guess it depends on your needs and price range.

reduced safety is the main difference between stretching a sidewall and doing it properly.

[/qoute]

In many cases stretching is doing it properly, and 99% never has any effect on safety. Maybe the safety of your rim against gutters.. haha

In many cases stretching is doing it properly, and 99% never has any effect on safety. Maybe the safety of your rim against gutters.. haha

not picking a fight, but where is your evidence?

admittedly you could say the same for the recommended fitting tyres to rim widths (in terms of evidence) but I'm much more willing to believe a tyre manufacturer as a guide to rim fitments, against a fully sick drifter dude...

it looks HEKTIK ULEH.........but kinda retarded at the same time.

i wouldnt do it to my tyres.

on the flip side, how about slighty oversized tyres on smaller rims.

ive got 265's on the rear. they fit nice. i was thinking maybe going with 285's next.

whats the effect on sidewalls etc ?

Edited by Munkyb0y
not picking a fight, but where is your evidence?

admittedly you could say the same for the recommended fitting tyres to rim widths (in terms of evidence) but I'm much more willing to believe a tyre manufacturer as a guide to rim fitments, against a fully sick drifter dude...

I base it purely on my experience (in real life) where I have never had a single problem with tyres magically exploding or debeading running 215/45 on 9J. I can pretty safely say that I have gone through more tyres in the last two years than most people on here.

I have even broken a wheel running a 215/40 on a 9J and the tyre did not deflate. I smashed a 215/45 on a 9J into a gutter destroying the wheel and again the tyre did not deflate or debead. The only time I have had a problem with leaking was when I pinched the bead because I suck at fitting tyres. Actually now that I think about it, the rear wheel/tyre setup on the picture in my avatar is 215/45 on 9.5J, again, no problems.

One thing that I do understand people getting upset about, is beading the tyre.

Often people will exceed the recommended beading pressure either using an chemical explosion or a very high pressure air tank.

If you use a bicycle tube while beading the tyre it is possible to bead the tyre using around 50psi if the stretch is not too crazy.

One other way if you are going for crazy stretch is to stretch the tyre on a less-wide wheel to pre-stretch it so you can put it on your really wide wheel later.

Also the wheels you are using make a huge difference. The best wheels I have seen for stretching tyres are Work VS-KF, they bead so easily.

So basically, I have nothing more to go on than the evidence of what I have seen and experienced in real life. Which I realise can be confusing for many people on internet.

edit: I do of course realise that as someone who has been known to partake of the occasional drift, my credibility is through the floor as far as SAU goes :domokun:

Edited by Laurence
Massive stretch is retarded, it doesn't even look good. I fail to see the purpose of it, you want some sidewall flex otherwise its just too unpredictable. Unless you drift non stop then the correct tyre size is going to perform better.

I 100% agree that massive stretch is retarded as i even posted i did it (245" on 12 or 13" rims )for autosalon 5 years back for shits and giggles.

not picking a fight, but where is your evidence?

admittedly you could say the same for the recommended fitting tyres to rim widths (in terms of evidence) but I'm much more willing to believe a tyre manufacturer as a guide to rim fitments, against a fully sick drifter dude...

We work very closely with TOYO and tyre size guidelines are to stop mororns from fitting tyres up wrong and claiming damages and are for common applications.... as with anything there is always improvements to be made above and beyond the posted guidelines. It is much like wheel alignments, manufactures have guidlines but after that every thing is subsective.

In my post post i should have put also that if it is done properly has ZERO effect on safety instead of saying that in 99% of cases (1% retarded) but yeah read it as you wish.

In our application the steering feedback from stretched 235 R888's on a 9.5" rim is far better than the 9" rim limit that most tyre shops will fit it up too....

Edited by URAS

why not hey :P

stretching tyres makes them MORE predictable, not less, then having wider tyres on there, simply because there is next to no sidewall flex. Fitting wide was tyres or narrow rims gives you the V8 bogan look of Bags on the rears... not too bad for drags but horrible for corners and sliding.

why....

So you can have wheel fitment like this...

Urashood008.jpg

Spending thousands of dollars on making a pure performance machine that wins $5 trophies that nobody cares about is equally stupid, but just depends what floats your boat.

Edited by Laurence

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can u check this way it works for power supply?
    • These coils draw 10amps that what i read online
    • I appreciate the detailed explanation, think I understand now. I spent the better part of last night reading what I could about shuffle and potential solutions. I had replaced the OEM twin turbo pipe with an alternate Y pipe that is separated further away from the turbo. The current one is from HKS and I had a previous pipe that was separated even further away, both have shuffle. I had heard that a divider can be welded in to the OEM pipe to remove turbulence, and figure that aftermarket pipes that are more separated would achieve the same thing. From what I read, most people with -10 turbos get shuffle due to their size, though it's a bit less common with -5s on a standard RB26. I think Nismoid mentioned somewhere it's because OEM recirculation piping is common in Australia with -5 cars. It seems that the recommendation tends to vary between a few options, which I've ordered in what I think is most feasible for me:  1. Retune the MAP or boost controller to try to eliminate shuffle 2. Install OEM recirculation piping 3. Something called a 'balance pipe' welded onto the exhaust manifolds. I don't know if kits for this are available, seems like pure fabrication work 4. simply go single turbo My current layout is as follows: Garrett 2860 -5s HKS Racing Suction intake MAF delete pipes HKS racing chamber intake piping hard intercooler piping,  ARC intercooler HKS SSQV BOV and pipe Haltech 2500 elite ECU and boost solenoid/controller HPI dump pipes OEM exhaust manifolds HKS VCAM step 1 and supporting head modifications Built 2.6 bottom end All OEM recirculation piping was removed, relevant areas sealed off I'll keep an eye out for any alternative solutions but can get started with this.  Only other question is, does shuffle harm the turbo (or anything else)? It seems like some people say your turbo shafts will explode because of the opposing forces after a while and others say they just live with it and adjust their pedal foot accordingly. 
    • That worked out PERFECTLY! Thank you big time to JJ. He was able to swap me his stock diff. He drove all the way to me as well. Killer! Removal & install was pretty straightforward. The diff itself is HEAVY. So that’s a 2 man job.  Man does the car drive nice now! Couldn’t have worked out any better 👌
×
×
  • Create New...