Jump to content
SAU Community

Recommended Posts

lookin at buyin a vspec 2 (import), spraying it and swapping all my shit out of a 91 gtr to the vspec

does it distinguish the fact on the plates???

the only difference being brakes really...... if it jus says 1994 ill jus get a 94 GTR and swap it over with my brembos. if it has no mention of vspec lol

thx a million!

Link to comment
https://www.sau.com.au/forums/topic/171420-32-gtr-vspec-ii/
Share on other sites

lookin at buyin a vspec 2 (import), spraying it and swapping all my shit out of a 91 gtr to the vspec

does it distinguish the fact on the plates???

the only difference being brakes really...... if it jus says 1994 ill jus get a 94 GTR and swap it over with my brembos. if it has no mention of vspec lol

thx a million!

As far as I know:

The under-bonnet plate says the same thing for v.spec and v.spec ii, model number

is KBNR32RBFSAA which is different to a stock R32 GTR.

There's no difference between the v.spec and v.spec ii apart from stock tyre sizes and year of build

(v.spec = 93, v.spec ii = 94). They both had Brembos and the 17" BBS rims.

Check the brake booster hose for a date stamp because you won't have the original tyres

on it if complied for Australia. Should have a 94 build date.

The last 6 digits of the VIN should also be fairly high.

There are far fewer v.spec and v.spec ii R32s than 'normal' R32 GTRs; which

is why a standard v.spec or v.spec ii is a bit of a collector's item.

Regards,

Saliya

Link to comment
https://www.sau.com.au/forums/topic/171420-32-gtr-vspec-ii/#findComment-3161032
Share on other sites

As far as I know:

The under-bonnet plate says the same thing for v.spec and v.spec ii, model number

is KBNR32RBFSAA which is different to a stock R32 GTR.

There's no difference between the v.spec and v.spec ii apart from stock tyre sizes and year of build

(v.spec = 93, v.spec ii = 94). They both had Brembos and the 17" BBS rims.

Check the brake booster hose for a date stamp because you won't have the original tyres

on it if complied for Australia. Should have a 94 build date.

The last 6 digits of the VIN should also be fairly high.

There are far fewer v.spec and v.spec ii R32s than 'normal' R32 GTRs; which

is why a standard v.spec or v.spec ii is a bit of a collector's item.

Regards,

Saliya

thanks thats all i needed to kno im glad sum1 had something good to say haha

Link to comment
https://www.sau.com.au/forums/topic/171420-32-gtr-vspec-ii/#findComment-3161237
Share on other sites

in regards to resale.......... will a vspec2 go for more than say a normal 94 model, seeing nothing will be standard on the car anyway, ill be changing the brakes to 6pot n 4 pot so the brembos arent an issue seeing thats all thats different.........

hmm f*k!!!!!!!!!

Edited by 747.GTR
Link to comment
https://www.sau.com.au/forums/topic/171420-32-gtr-vspec-ii/#findComment-3162239
Share on other sites

in regards to resale.......... will a vspec2 go for more than say a normal 94 model, seeing nothing will be standard on the car anyway, ill be changing the brakes to 6pot n 4 pot so the brembos arent an issue seeing thats all thats different.........

hmm f*k!!!!!!!!!

in reply to resale, i truly think a standard/neat/good v spec 2 will fetch more money than you transfering parts to it.

there isnt really much point in doing this to a vspec when you already have a 32. your going to change most of the things that make a vspec anyway!so there for is it really going to be worth it!

hope that heps you decide

Link to comment
https://www.sau.com.au/forums/topic/171420-32-gtr-vspec-ii/#findComment-3162645
Share on other sites

ye thats wat i was thinkin........ im better off gettin jus a normal 94 model then.

ive already got a full inteior and built engine ppg box n brakes and wheels on my 91 gtr but i want a late model and wanna paint it somethin special as i didnt chose the colour my one now got sprayed wen my mate had it haha

Link to comment
https://www.sau.com.au/forums/topic/171420-32-gtr-vspec-ii/#findComment-3162861
Share on other sites

ye thats wat i was thinkin........ im better off gettin jus a normal 94 model then.

ive already got a full inteior and built engine ppg box n brakes and wheels on my 91 gtr but i want a late model and wanna paint it somethin special as i didnt chose the colour my one now got sprayed wen my mate had it haha

i dont think there is normal model 94's i'm pretty sure all 94's are vspecII

not 100% though cant remember

Link to comment
https://www.sau.com.au/forums/topic/171420-32-gtr-vspec-ii/#findComment-3163062
Share on other sites

If you want to repaint and also change the runnin gear, why not just buy an earlier model GTR that start from around 500,000 yen. There is little difference between an '89 and a '94, especially with what you want to do with it. Otherwise, just sae yourself the hassle and buy one already here as the 1.1 mil yen r32 will end up costing 20K on road here.

Link to comment
https://www.sau.com.au/forums/topic/171420-32-gtr-vspec-ii/#findComment-3163235
Share on other sites

novak, there are "regular" 94 models. not all 94s were Vspec.

If you really must have a late model the look at a 93 or 94 non-vspec. for what you want to do to it paying extra for the vspec would be a waste of money. the vspec is not that special anyway.

but I would forget about the year all together and just look for a very nice, clean stock or close to stock GTR. the year doesn't matter. I've seen some thrashed, shagged out 93 models and I've seen some absolutely mint 89 and 90 models. buy the car on condition, not on year model.

Link to comment
https://www.sau.com.au/forums/topic/171420-32-gtr-vspec-ii/#findComment-3163257
Share on other sites

My old R32 V-Spec 2 sold for small premium, if it were a road car and not modified for tarmac rallies (rally rego) it could have sold many times over for a much greater figure... mine was in very good condition though.

Australian delivered GTR are the pricey ones.

Link to comment
https://www.sau.com.au/forums/topic/171420-32-gtr-vspec-ii/#findComment-3163329
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...