Jump to content
SAU Community

Recommended Posts

Hey Guys,

I currently have a RB25DET, PowerFC, GTR FMIC, High flow cat, greddy plenum with Q45 TB, 13psi on standard turbz and big exhaust. Everything else is pretty much stock.

Currently im at 217kw, what will i need for 350??

Im thinking injectors, bigger turbo... what else?

Its in a S13 so im not sure how much room there would be for a bigass turbo and it has a RB20 gearbox (twin plate clutch), i hear these are only good for around 270kw before they self destruct.

Link to comment
https://www.sau.com.au/forums/topic/172633-required-mods-for-350rwkw/
Share on other sites

RB25 box - $1500

Rebuild, head work etc - $6000-7000

Turbo - $1700

Manifold - $1000

Ext Gate - $700

Injectors - $800

AFM - $300

Plus all the labour to fit it all, new hoses, clamps, gaskets, dump pipes, coils etc - $3000

Thats 16k or there abouts.

Then there is the diff, suspension, brakes etc. So add on around another 8k there.

Oh and a clutch, 1200.

And no doubt other things i have missed aswell.

Simply put, power is not cheap. The more you want the more its going to cost.

Reliably and getting it to the ground so you can actually drive the car, your looking at around 25k to do it properly.

As you basically have a stock car, you've gotta change everything

Nice, might lower my power goal slightly then :)

A well tuned responsive car at 290kw at the wheels is a better drive

than a car that pushes 350kw does not get any traction on lift and goes on like a pig.

It is about the package...not the power....especially if the tuner gets his results at 1.5bar+ and 8000rpm

using nitro.....lol...a bit over the top...but you all know what I mean

I would suggest to you...a new turbo....a set of cams...and a good tune for street work......

I already knew power costs money...

But im sure your over Exaggerating :)

Oh also have an upgraded fuel pump, im thinking of spending around 3 - 4k on it to get some decent numbers. Was thinking a hi flow and injectors.

Edited by sicrb25

Im really not exaggerating, if anything im actually being conservative in some of the estimates.

If you only have 4k, then all you can do is a hi-flow and injectors and thats about it.

tuning will eat up the rest and you'll have around $500 or so change to spend on fuel and whatever :)

I killed mine with 270rwkw with my RB25.

It lasted about 4 months and was in good condition prior. I'd given it a good workout @ the drags on 3 separate occasions.

Roy with the RB20 has made 250rwkw and circuit raced his heaps.

I would say the added torque/traction i had with my setup killed it faster and thats why Roy's car/box is still going.

Plus circuit/drag is different aswell

So... with a 25, the hi-flow will be pushing the boxes limits if you intend to do any type of drag racing.

Circuit you might find its ok

A well tuned responsive car at 290kw at the wheels is a better drive

than a car that pushes 350kw does not get any traction on lift and goes on like a pig.

It is about the package...not the power....especially if the tuner gets his results at 1.5bar+ and 8000rpm

using nitro.....lol...a bit over the top...but you all know what I mean

I would suggest to you...a new turbo....a set of cams...and a good tune for street work......

yeah i learnt that with my FD rx7.... did a crazy build up 350-odd kw then realised i liked the 300 far better.

for me the ultimate setup on a rb25 is evrything you already got plus one thing.... a TD06SH-25g kit. This kit has proved on std internals to run mid 10's on slicks (CREATD MSA manual r33) and mid 11's on street radials (andrew manual r33 from autobarn frankston... now wearing a T88 and transbrake tho :) ).

The boxes limits or the engines limits, if its the boxes i dunno where the hell you got that from since theres alot of people running alot more power through it and still going strong, the engine on the other hand is a gamble at most.

Cheers.

Plus little bit of an equation anything under 300 rwkws or just on is close to max limitations of a good reliable streeter any more well as stated you budget doubles in price just alone for handling tyres and fuel

Cheers

A

yeah i learnt that with my FD rx7.... did a crazy build up 350-odd kw then realised i liked the 300 far better.

for me the ultimate setup on a rb25 is evrything you already got plus one thing.... a TD06SH-25g kit. This kit has proved on std internals to run mid 10's on slicks (CREATD MSA manual r33) and mid 11's on street radials (andrew manual r33 from autobarn frankston... now wearing a T88 and transbrake tho :) ).

Something a little like this???

R32 Gtst:

Engine: Rb25det conversion The internals are far from stock and top secret, Flowed head/port polish, HKS 275 camshafts, HKS head gasket, Trust Stainless top mount manifold, Trust 50mm waste-gate, Trust front mount intercooler, Trust Oil cooler and relocation filter kit, GReddy Type-R BOV plumbed backed, Nismo 820cc injectors, HKS F-con Pro V.... im sure ive missed a few bits n pieces

Suspension And Running Gear: Rebuilt Rb25det gearbox, brand new twin plate OS clutch, Nismo 2way mechanical diff, Tein adjustable coilovers, Tein Adjustable Castor Rods, Tein Tie Rod Ends, 17inch Genuine 3 piece Nismo rims.

R32015.jpg

Pictures from a year ago, its now got a full gtr intake setup including ITB's, 490rwhp @ 1.2bar, we actually dont know what the turbo is, its one of three items, Trust Td06-25g, old school trust td07s or a t67-25g, whatever it is, it does the job :(

Due for a retune in about 3 - 4 months time, its in at the shop atm having engine and box pulled for more work and full paintjob. Ohhh and 11.4 on crappy streets and 10.8 on crappy slicks, also my first time driving a car with some decent power at the drags, im more into drift... so you hit the nail on the head with your proported claims in the previous post imo.

Edited by `nigno

not to stray off topic but is that josh's (NismoBoy) old r32 he had?

About the gearboxs lasting. I would be more inclined to think that circuit racing would put more stress, and temperature through a box then drag racing would, as its over an exteneded time. In a 20min race you do more high rpm gearchanges, more throttle application(on/off) and temps skyrocket cause your doing that for so long. Only thing you dont get is the initial force on everything from the launch as there isnt as much rubber layed down on the start/finish line like found at a dragstrip. 370rwkws killed our rb25gbox at the track after a 1.5 years of racing, 4th gear. Application will determine most things. I would stick to a conserative power if your keeping the rb20box.

Edited by r33_racer

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...