Jump to content
SAU Community

Recommended Posts

ahh the new corvette does use pushrods. There is nothing really wrong with pushrods either.

apart from higher reciprocating mass and limited flexibility for valve and timing arangements such as variable valve timing and multiple valve configurations.

its main advantage , smaller size , is not realy an issue in a smaller capacity forced induction or high output NA engine either

There are a few cars here in Australia that we Americans don't have, like the list indicated.

But in American we have a few cool in the BMW 3series line.

Cars under the OEM non turbo....Honda.....Acura TL....278HP 4 Door, Acura 4 Door 300HP; Nissan Infinite....GT35 ...298HP 2 doors, GT35 4 Doors 305HP; Toyota...Lexus..IS350...305HP.

All of these cars can have a single or twin turbo or supercharges add to them.

The price for these cars start $29K to under $40K.

In America you can purchase a BMW 335i Twin turbo>> 300HP&300FT for only $48000 walk out the door price<<<.

But I am so damn happy to be in OZ driving my 1996 GTS SII liner.

My American car was an Acura 2004 TL with a supercharger, CB, drop on OZ 19" wheels.

^^^

it's crazy how much beemers cost here, and even though the import tarrifs are so low now here imported new cars are still expensive it seems.

Oh well i wouldn't trade anything in australia for cheaper cars.

Cars currently available for sale that I'd love to see on Australian roads:

JDM Honda Civic Type-R

JDM Honda Integra Type-R

Caterham Superlight and CSR

Vauxhall VX220 (Turbo)

Pontiac Solstice

Nissan Skyline (V35 and V36)

Ford Mustang

Dodge Charger SRT8

I couldn't afford one but it would be nice to see a Carrera GT and a McLaren SLR on the road over here.

i'm pretty sure that motor magazine took a carrera gt for a strap through the NT to test out it's top speed, but i'm not sure. i will have to find the mag.

Cars currently available for sale that I'd love to see on Australian roads:

JDM Honda Civic Type-R

JDM Honda Integra Type-R

Caterham Superlight and CSR

Vauxhall VX220 (Turbo)

Pontiac Solstice

Nissan Skyline (V35 and V36)

Ford Mustang

Dodge Charger SRT8

there are quite a few v35 skylines in australia

Yep, I know.

I misread the thread as being "cars you want but your country's local divisions of car OEMs won't import" rather than "just can't get".

Otherwise, we can technically get any car in this country as long as we're willing to pay for it...and get a CAMS racing license and use it as a race only import.

How about cars I would prefer we WEREN'T Allowed?

Commodores (Especially VL's)

Falcon Utes

Done.

Every time you read about a P plater crashing and killing his 27 friends who were in the car, its a commodore driver.......every time you read of a P plater doing 240 through a school zone, its a commo driver.........

Nuff said.

How about cars I would prefer we WEREN'T Allowed?

Commodores (Especially VL's)

Falcon Utes

Done.

Every time you read about a P plater crashing and killing his 27 friends who were in the car, its a commodore driver.......every time you read of a P plater doing 240 through a school zone, its a commo driver.........

Nuff said.

uninformed reply of the year goes to

Care to explain what was 'uninformed' about it? I don't like commodores or falcons. Thats not a matter of being informed or not, its a matter of opinion.

That dickheads drive all makes and models and you've got your head in the sand or up your ass.

Right up there next to commodores and falcons in the confiscated list was....... you guessed, Skyline.

Every time you read about a P plater crashing and killing his 27 friends who were in the car, its a commodore driver.......every time you read of a P plater doing 240 through a school zone, its a commo driver.........

You must live in Boganville if Falcodores headline the "young driver menace" articles in your local rag.

In most major cities its grey imports that hold the pride of place when it comes to driving at stupidly high speeds through metropolitan streets.

Yeh, I have some Aussie friends who post here, and are always linking me to these forums, so I figured if I was gonna read all the posts anyways I might as well reply. This is the "General Automotive Discussion" forum is it not?

I'd also like to add the Toyota Chaser to my list.

yes this is the general automotive discussion.............for skylines AUSTRALIA ok

You must live in Boganville if Falcodores headline the "young driver menace" articles in your local rag.

In most major cities its grey imports that hold the pride of place when it comes to driving at stupidly high speeds through metropolitan streets.

Not according to the impound figures.

yes this is the general automotive discussion.............for skylines AUSTRALIA ok

This has to do with this thread how? There are many international members of this forums and they can post where they wish.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
×
×
  • Create New...