Rb 26/30 Project

[sbmotorsport]

Here is my lil project, that unfortnately i cant complete cause i need cash...

Item located in melbourne, n looking for $3700 but open to resonable offers.

The engine is currently just dummy assembled as per pics.

Please pm me for more details or call me 0411512344

Its pretty much everything u need except a gasket kit, bearing kit, n 26/30 pistons, n maybe a clean n hone n the engine would be ready for final assenbly. All electronics are there for it to run.

=R32 gtr head.. complete with manifolds, cams, rocker cover etc

=VL rb30 series 2 block with oil feed & drain.... Tapped out to suit gtr head and timing belt idler puller relocated

=R32 gtr computer

=R32 gtr complete loom

=2 hks pod filter with adaptors to suit R32 gtr AFM

=2 R32 gtr AFM and all intake piping

=2 R32 gtr turbos (need rebuild) $150ono

=R32 gtr sump & front diff

=All sensors, injectors etc needed to run

=Turbo piping (twin turbo pipe), oil lines, waterlines

=Cast exhaust mainfolds and dump pipes

=Gtr Intercooler $400ono

=Flywheel $50ono

=Gtr oil and water pumps

=Gtr p/steer pump

=Gtr Harmonic Balancer $40ono

=Standard Rb30e pistons n rods $75ono

Thanks for looking

Ralph

Edited July 18, 2007 by sbmotorsport

[sbmotorsport]

Very keen to sell guys!!, asking AROUND $3700 so feel free to make offers... Remeber this is not just a long motor comes with loom, ecu, manifolds, sensors, intercooler, AFM etc etc... Also willing to build the short motor for FREE is the buyer provides the 26/30 pistons (i'll foot the bill for machining n bearings)!!

Edited June 17, 2007 by sbmotorsport

[sbmotorsport]

Price drop... $3500

Come on someone out there needs a 26/30...

Make me a offer..

[Stoney85]

there's a difference between need and want, i want that motor, but i need my money

[Young GT-R]

I am only after the top ....... willing to separate?

[sbmotorsport]

I am only after the top ....... willing to separate?

did u want everthing except the bottom end... like u want the cooler, ecu, loom etc as well or did u want just the bare head?

[sbmotorsport]

More pics added, PRICE DROP $3200!!!!!

needs to go asap!!!

[Young GT-R]

did u want everthing except the bottom end... like u want the cooler, ecu, loom etc as well or did u want just the bare head?

I am after the head with plenum, injectors, cam and centre covers (dont need timing belt cover), coil packs, loom, ecu, turbo lines, CAS.

dont need exhaust side at all or fmic or any part of block.....

let me know though.

Edited June 28, 2007 by Young GT-R

[R31Nismoid]

Your little project now is it?

You said it was your mates project not 1 month ago

http://www.skylinesaustralia.com/forums/in...t&p=3122509

[nugget400hp]

Hi mate I need the loom, how much for it?

[sbmotorsport]

Your little project now is it?

You said it was your mates project not 1 month ago

http://www.skylinesaustralia.com/forums/in...t&p=3122509

Yeah buddy, my mate moved overseas n i ended up buyin it off him cause he needed the cash for the move... but i just dun have the cash or room for it cause i'm moving so yeah it was my friends a month ago now mine.. i didnt realize u had to tell the engines life story..

N i'm not really keen to seperate. I just want all of it gone...

Edited June 29, 2007 by sbmotorsport

[OMR031]

Here is my lil project, that unfortnately i cant complete cause i need cash...

Item located in melbourne, n looking for $3700 but open to resonable offers.

The engine is currently just dummy assembled as per pics.

Please pm me for more details or call me 0411512344

Its pretty much everything u need except a gasket kit, bearing kit, n 26/30 pistons, n maybe a clean n hone n the engine would be ready for final assenbly. All electronics are there for it to run.

=R32 gtr head.. complete with manifolds, cams, rocker cover etc

=VL rb30 series 2 short motor with oil feed & drain.... Tapped out to suit gtr head and timing belt idler puller relocated

=R32 gtr computer

=R32 gtr complete loom

=2 hks pod filter with adaptors to suit R32 gtr AFM

=2 R32 gtr AFM and all intake piping

=2 R32 gtr turbos (need rebuild)

=R32 gtr sump & front diff

=All sensors, injectors etc needed to run

=Turbo piping (twin turbo pipe), oil lines, waterlines

=Cast exhaust mainfolds and dump pipes

=Gtr Intercooler

=Flywheel

=Gtr oil and water pumps

=Gtr p/steer pump

Thanks for looking

Ralph

hey mate i know this is a bit off topic but i am in the process of building the same motor and i was just wondering if you could tell me how many teeth the timing belt has, or could you give us the numbers off the belt, if you still have the motor thanks steve

[Young GT-R]

152 teeth, as I told you the part number is in the DOHC guide......which if you're building this engine you'd be a fool not to have.

[MBS206]

Sell intake manifold seperate?

If so, PM me

[Risking]

Bottom end sold to me =)

[sbmotorsport]

Parts list edited... keen to get rid of this stuff.. make a offer!!!