Jump to content
SAU Community

Recommended Posts

Hello guys,

im actually searching for a R33 GTS-t RB25DET complete engine gasket set-number, i would be very thankful

if you could supply me with one.

Greets, Artur.

I have several years for this. tell me your VIN code and i will give you the exact number you need.

Hi there

I want to know the part number of the two arms that hold up the boot lip for a R34 GTT 4DR...and also will i be able to order a repair manual from nissan for my car...Thanks

Anyone please help...need those arms ASAP~~~THANKS~~~

I have several years for this. tell me your VIN code and i will give you the exact number you need.

Hello mate,

the engine cam off a 1995 Syline GTS-t Series I, i do not have a VIN because the engine is in my S13 now.

I would be very thankful if you could supply me with an engine gasket kit number for a 1995 Rb25DET Skyline.

I do also need the part number of the complete clutch master cylinder of the R33 Skyline GTS-t Rb25DET.

Thanks in advance.

Greets, Artur.

Edited by Behind Horizon
Anyone please help...need those arms ASAP~~~THANKS~~~

Are you asking for the boot hinges? They look like folded horseshoe shaped steel that acts like the hinge for the boot lid.

The program used to find these part numbers has a lot of car models stored in it. It's quite difficult to pull a part number out of it without supplying it with a lot of info. VIN numbers give me the exact model car you have. This makes life a lot easier when searching for part numbers. I don't want to give out wrong part numbers, have you order them, pay top dollar, get the part from Japan and then realise they are not the right part.

To make it easier for me, the more info supplied from you the better.

VIN number is like GOLD

Model and year come a close SILVER

And you will get nothing out of me for BRONZE (Which is a brief description of something that could be out of any make or model.)

Cheers, Ron

Hello mate,

the engine cam off a 1995 Syline GTS-t Series I, i do not have a VIN because the engine is in my S13 now.

I would be very thankful if you could supply me with an engine gasket kit number for a 1995 Rb25DET Skyline.

I do also need the part number of the complete clutch master cylinder of the R33 Skyline GTS-t Rb25DET.

Thanks in advance.

Greets, Artur.

Right-o! The year and RB25DET made it a lot easier. I hope this is right. Gasket Set: 10101-17U27-

The Clutch Master Cylinder for the same year car is 30610-21U91-

Hope these help. Ron

Are you asking for the boot hinges? They look like folded horseshoe shaped steel that acts like the hinge for the boot lid.

The program used to find these part numbers has a lot of car models stored in it. It's quite difficult to pull a part number out of it without supplying it with a lot of info. VIN numbers give me the exact model car you have. This makes life a lot easier when searching for part numbers. I don't want to give out wrong part numbers, have you order them, pay top dollar, get the part from Japan and then realise they are not the right part.

To make it easier for me, the more info supplied from you the better.

VIN number is like GOLD

Model and year come a close SILVER

And you will get nothing out of me for BRONZE (Which is a brief description of something that could be out of any make or model.)

Cheers, Ron

Ok...My VIN is 6U90000ER34007892..Model is 1998 ER34 GTT 4 DOOR SEDAN...No sure what they call(pretty sure is the one u are talking about) but those steel that stick up is what im after...Thanks Ron....post-27454-1188905225_thumb.jpg

Ok...My VIN is 6U90000ER34007892..Model is 1998 ER34 GTT 4 DOOR SEDAN...No sure what they call(pretty sure is the one u are talking about) but those steel that stick up is what im after...Thanks Ron....post-27454-1188905225_thumb.jpg

Perfect! This is exactly what I need. Just for future reference, your Japanese VIN is ER34007892. The 6U90000 thats at the front is what gets added to it when it gets compliance.

I'll look this up for you as soon as i get a chance. either close to midnight tonight or tomorrow arvo.

Cheers. Ron

Perfect! This is exactly what I need. Just for future reference, your Japanese VIN is ER34007892. The 6U90000 thats at the front is what gets added to it when it gets compliance.

I'll look this up for you as soon as i get a chance. either close to midnight tonight or tomorrow arvo.

Cheers. Ron

RH boot hinge is 84400-AA000-

LH boot hinge is 84401-AA000-

Enjoy. Ron

Hi,

Car details:

R34 GTR V Spec II NUR

Build date: June 2002

VIN: BNR34403675

Part numbers I am after please:

Rear quarter windows on Driver's and passenger's side and seals. Are the seals joined to the rear quarter glass? and therefore have to be purchased together?

Can you supply schematic of how quarter windows are attched?

Thank you

Hi,

Car details:

R34 GTR V Spec II NUR

Build date: June 2002

VIN: BNR34403675

Part numbers I am after please:

Rear quarter windows on Driver's and passenger's side and seals. Are the seals joined to the rear quarter glass? and therefore have to be purchased together?

Can you supply schematic of how quarter windows are attched?

Thank you

When I ran your VIN number it didnt show up in the records. I added all of the info you gave me and this is what i found. I hope its what your after

RH 83306-AA100-

LH 83307-AA100-

post-14067-1189149277_thumb.jpg

Just asking if you guys would know if these are the right parts - someone with nissan fast setup maybe?

Anyway your feedback would be great.

Oh my car is R33 GTR 1995 model.

Nissan OEM BCNR33 GTR Crank Angle Sensor

"NISSAN SENSOR A-CRANK 23731-02U11" ?

Nissan OEM GTR N1 Oil Pump

"NISSAN ASSY OIL PUMP 15010-24U01" ?

Also one other question I was getting block bored & honed to 86.5mm and was wondering if Tomei RB26 Gasket Kit (1.2mm) (87mm) would suit. As far as I can tell tomei only make a 87mm and an 88mm gaskets.

Sorry don't have car atm but you could use this r33 GTR one:

1996 R33 GTR - BCNR33-024671

Cheers,

Pen

Edited by Penfold

whats your vin number ?

Just asking if you guys would know if these are the right parts - someone with nissan fast setup maybe?

Anyway your feedback would be great.

Oh my car is R33 GTR 1995 model.

Nissan OEM BCNR33 GTR Crank Angle Sensor

"NISSAN SENSOR A-CRANK 23731-02U11" ?

Nissan OEM GTR N1 Oil Pump

"NISSAN ASSY OIL PUMP 15010-24U01" ?

Also one other question I was getting block bored & honed to 86.5mm and was wondering if Tomei RB26 Gasket Kit (1.2mm) (87mm) would suit. As far as I can tell tomei only make a 87mm and an 88mm gaskets.

Cheers,

Pen

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
×
×
  • Create New...