Jump to content
SAU Community

Recommended Posts

Hello guys,

im actually searching for a R33 GTS-t RB25DET complete engine gasket set-number, i would be very thankful

if you could supply me with one.

Greets, Artur.

I have several years for this. tell me your VIN code and i will give you the exact number you need.

Hi there

I want to know the part number of the two arms that hold up the boot lip for a R34 GTT 4DR...and also will i be able to order a repair manual from nissan for my car...Thanks

Anyone please help...need those arms ASAP~~~THANKS~~~

I have several years for this. tell me your VIN code and i will give you the exact number you need.

Hello mate,

the engine cam off a 1995 Syline GTS-t Series I, i do not have a VIN because the engine is in my S13 now.

I would be very thankful if you could supply me with an engine gasket kit number for a 1995 Rb25DET Skyline.

I do also need the part number of the complete clutch master cylinder of the R33 Skyline GTS-t Rb25DET.

Thanks in advance.

Greets, Artur.

Edited by Behind Horizon
Anyone please help...need those arms ASAP~~~THANKS~~~

Are you asking for the boot hinges? They look like folded horseshoe shaped steel that acts like the hinge for the boot lid.

The program used to find these part numbers has a lot of car models stored in it. It's quite difficult to pull a part number out of it without supplying it with a lot of info. VIN numbers give me the exact model car you have. This makes life a lot easier when searching for part numbers. I don't want to give out wrong part numbers, have you order them, pay top dollar, get the part from Japan and then realise they are not the right part.

To make it easier for me, the more info supplied from you the better.

VIN number is like GOLD

Model and year come a close SILVER

And you will get nothing out of me for BRONZE (Which is a brief description of something that could be out of any make or model.)

Cheers, Ron

Hello mate,

the engine cam off a 1995 Syline GTS-t Series I, i do not have a VIN because the engine is in my S13 now.

I would be very thankful if you could supply me with an engine gasket kit number for a 1995 Rb25DET Skyline.

I do also need the part number of the complete clutch master cylinder of the R33 Skyline GTS-t Rb25DET.

Thanks in advance.

Greets, Artur.

Right-o! The year and RB25DET made it a lot easier. I hope this is right. Gasket Set: 10101-17U27-

The Clutch Master Cylinder for the same year car is 30610-21U91-

Hope these help. Ron

Are you asking for the boot hinges? They look like folded horseshoe shaped steel that acts like the hinge for the boot lid.

The program used to find these part numbers has a lot of car models stored in it. It's quite difficult to pull a part number out of it without supplying it with a lot of info. VIN numbers give me the exact model car you have. This makes life a lot easier when searching for part numbers. I don't want to give out wrong part numbers, have you order them, pay top dollar, get the part from Japan and then realise they are not the right part.

To make it easier for me, the more info supplied from you the better.

VIN number is like GOLD

Model and year come a close SILVER

And you will get nothing out of me for BRONZE (Which is a brief description of something that could be out of any make or model.)

Cheers, Ron

Ok...My VIN is 6U90000ER34007892..Model is 1998 ER34 GTT 4 DOOR SEDAN...No sure what they call(pretty sure is the one u are talking about) but those steel that stick up is what im after...Thanks Ron....post-27454-1188905225_thumb.jpg

Ok...My VIN is 6U90000ER34007892..Model is 1998 ER34 GTT 4 DOOR SEDAN...No sure what they call(pretty sure is the one u are talking about) but those steel that stick up is what im after...Thanks Ron....post-27454-1188905225_thumb.jpg

Perfect! This is exactly what I need. Just for future reference, your Japanese VIN is ER34007892. The 6U90000 thats at the front is what gets added to it when it gets compliance.

I'll look this up for you as soon as i get a chance. either close to midnight tonight or tomorrow arvo.

Cheers. Ron

Perfect! This is exactly what I need. Just for future reference, your Japanese VIN is ER34007892. The 6U90000 thats at the front is what gets added to it when it gets compliance.

I'll look this up for you as soon as i get a chance. either close to midnight tonight or tomorrow arvo.

Cheers. Ron

RH boot hinge is 84400-AA000-

LH boot hinge is 84401-AA000-

Enjoy. Ron

Hi,

Car details:

R34 GTR V Spec II NUR

Build date: June 2002

VIN: BNR34403675

Part numbers I am after please:

Rear quarter windows on Driver's and passenger's side and seals. Are the seals joined to the rear quarter glass? and therefore have to be purchased together?

Can you supply schematic of how quarter windows are attched?

Thank you

Hi,

Car details:

R34 GTR V Spec II NUR

Build date: June 2002

VIN: BNR34403675

Part numbers I am after please:

Rear quarter windows on Driver's and passenger's side and seals. Are the seals joined to the rear quarter glass? and therefore have to be purchased together?

Can you supply schematic of how quarter windows are attched?

Thank you

When I ran your VIN number it didnt show up in the records. I added all of the info you gave me and this is what i found. I hope its what your after

RH 83306-AA100-

LH 83307-AA100-

post-14067-1189149277_thumb.jpg

Just asking if you guys would know if these are the right parts - someone with nissan fast setup maybe?

Anyway your feedback would be great.

Oh my car is R33 GTR 1995 model.

Nissan OEM BCNR33 GTR Crank Angle Sensor

"NISSAN SENSOR A-CRANK 23731-02U11" ?

Nissan OEM GTR N1 Oil Pump

"NISSAN ASSY OIL PUMP 15010-24U01" ?

Also one other question I was getting block bored & honed to 86.5mm and was wondering if Tomei RB26 Gasket Kit (1.2mm) (87mm) would suit. As far as I can tell tomei only make a 87mm and an 88mm gaskets.

Sorry don't have car atm but you could use this r33 GTR one:

1996 R33 GTR - BCNR33-024671

Cheers,

Pen

Edited by Penfold

whats your vin number ?

Just asking if you guys would know if these are the right parts - someone with nissan fast setup maybe?

Anyway your feedback would be great.

Oh my car is R33 GTR 1995 model.

Nissan OEM BCNR33 GTR Crank Angle Sensor

"NISSAN SENSOR A-CRANK 23731-02U11" ?

Nissan OEM GTR N1 Oil Pump

"NISSAN ASSY OIL PUMP 15010-24U01" ?

Also one other question I was getting block bored & honed to 86.5mm and was wondering if Tomei RB26 Gasket Kit (1.2mm) (87mm) would suit. As far as I can tell tomei only make a 87mm and an 88mm gaskets.

Cheers,

Pen

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...