Jump to content
SAU Community

Recommended Posts

Hi guys,

can I please have a list of all the ecu numbers for R32 GTR and R33 GTR???

Why? I want replace my O2 sensors and need to be sure which ecu I'm running, it had the later R33 type crank when the oil pump let go.

The numbers on mine is partially rubbed off, I can see

a Large 30

23710 0??02

MEC R128

0621

Thanks guys, your work is most appreciated.

Thanks Lippo, so theres no chance it could be an R33 ECU?

These are the only part numbers listed for an r33 gtr ecu

Whilst the first numbers are the same the second lot on an r33 start with a 2 and end with a 0 or 1

post-27276-1230463160_thumb.jpg

Edited by W0rp3D

don't worry the 33 and 32 gtr ECUs are interchangeable anyway.

more important is the 02 sensor size, the 32 uses the smaller thread and the 33 the larger thread. You need to check that first, it normally depends on what dump pipes you have on the car (most aftermarket ones use r33 style)

And if you have a look at your part number your ecu is for a carbie fed rb26 lol, im assuming its a typo.

post-27276-1230463692_thumb.jpg

But atleast yours is an rb and not a br :blush:

Edited by W0rp3D

Duncan, whilst they do plug in, I'm fairly certain the R33 & R32 GTR o2 sensors work differently. The power fc needs to know which type you are using.

I stupidly remembered that my ECU must be an R32 as it has a chip in it, so definately a R32.

Thanks guys.

Was wondering, im trying to find out what models use the same coil packs and igniter module as mine, here is the result after loading in my vin for the igniter:

post-27276-1230376566_thumb.jpg

Does it mean that every part number listed there will work on my car?

here

post-19275-1230540798_thumb.jpg

actually I'm not sure if thats the right part no you are after, but just go into parts master and you can see where the same part has been used on other models (as above)

Cheers,

Kaz

lol

you need logic to figure it out, you boys have got no hope haha :D

Please send a cheque for $50 and I'll get back to you..

I found it in the start menu just after i posted it :D

here

post-19275-1230540798_thumb.jpg

actually I'm not sure if thats the right part no you are after, but just go into parts master and you can see where the same part has been used on other models (as above)

Cheers,

Kaz

i was wondering how many pages that would go on for before some one mentioned using the master book method. if u want to get real tricky u can also check it again Australian models if u have the AUS part of Fast loaded as well, all you need to do is open up the AUS version of fast then go into the Master book it will load with AUS info. not saying there will be any matches but it's just a thought

hey buddy after gaskets for a r32 gtst 93

rocket cover

water pump

or even a vrs kit would u know how much they normally cost? know its a low ball but worth the ask

cheers

can't help with price's but Part No. as follows

Rocker cover 13270-58S01 and 13270-58S11 LH and RH

water pump is a liquid gasket (something like ultra grey or a three bond, three bond is genuine Nissan Part No. KP710-00150)

VRS 11042-72L26

any chance of getting part numbers for 1998 R34 GTT (ER34) for the centre console .. namely the double din stereo surround (fascia), the aircon surround (fascia) and the 2 brackets that hold the aircon/stereo in the centre console thanks

also does anyone know how long nissan usually need to get these parts from japan ??

Edited by Delta Force
  • 2 weeks later...
any chance of getting part numbers for 1998 R34 GTT (ER34) for the centre console .. namely the double din stereo surround (fascia), the aircon surround (fascia) and the 2 brackets that hold the aircon/stereo in the centre console thanks

also does anyone know how long nissan usually need to get these parts from japan ??

Facia for CD player 68260-AA005

there are 2 types of brkts but i don't read japanese so cant tell which is which part No. as follows

28039-AA000 LH

28039-AA010 LH

28038-AA000 RH

28038-AA010 RH

two types for ac Fascia aswell ( think it may be a differance in the finish)

AC unit Fascia 27570-AA000

27570-AA010

Lippo is right normaly takes about 2 weeks, just depends the the stock situation in japan

Edited by neofenrir34

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...