Jump to content
SAU Community

Recommended Posts

  • Replies 121
  • Created
  • Last Reply

Top Posters In This Topic

copied from the Japanese who wanted to look different - just a whole lof of "me too"

if it actually functioned better the recommended fitments from manufacturers would reflect a 225 width tyre on a 10" rim.

all motorsport has tyres which fit the rim properly - eg. V8s, touring cars, F1 etc etc.

Link to comment
https://www.sau.com.au/forums/topic/173783-stretched-tyres/#findComment-3192520
Share on other sites

yeh, like he said, it's got no real practical purpose but to look cool

I guess on drift cars, the less tyre on the road (at the back) = the better, so stretched tyres = less on the road (because they bulge in the middle)

from a grip standpoint, your getting less tread on the road though

Link to comment
https://www.sau.com.au/forums/topic/173783-stretched-tyres/#findComment-3192554
Share on other sites

yeh, like he said, it's got no real practical purpose but to look cool

I guess on drift cars, the less tyre on the road (at the back) = the better, so stretched tyres = less on the road (because they bulge in the middle)

from a grip standpoint, your getting less tread on the road though

although on high speed corners it feels like there is less flex in the wall. i just got new tyres (un streatched) 225 and it is now apparant on corners that the tyre has a little bit more give in it. just my two cents.

Edited by GTS_Retro
Link to comment
https://www.sau.com.au/forums/topic/173783-stretched-tyres/#findComment-3192598
Share on other sites

yeh retro, there will be alot less sidewall on stretched tyres, so less movement, but better to just go a lower profile and have the same size footprint on the road, like you've done now, than stretch the crap outta them and scrooge up your traction

Edited by r32 gts-turbo
Link to comment
https://www.sau.com.au/forums/topic/173783-stretched-tyres/#findComment-3192648
Share on other sites

also stretched tyres means you can have a wider rim under the car as it won't hit the guards as easily.

Wheels are there to hold your tyres. What's the point of running a wider rim if you're not going to use that width to crowd more tyre onto? All that extra metal would be unsprung ballast.

Link to comment
https://www.sau.com.au/forums/topic/173783-stretched-tyres/#findComment-3193726
Share on other sites

Wheels are there to hold your tyres. What's the point of running a wider rim if you're not going to use that width to crowd more tyre onto? All that extra metal would be unsprung ballast.

a lot of rims don't come in skinny sizes, and cars like sprinters don't have much room under the guards

Link to comment
https://www.sau.com.au/forums/topic/173783-stretched-tyres/#findComment-3193884
Share on other sites

anyone know if 234/45/17 can be stretched onto the rear 8.5 inch wide rims?

Yeah, shouldn't be an issue.

I've stretched a set of RT215s in that dimension onto a 9.5" wide rim, and even with the amount of abuse I've put the car through I haven't had any problems.

Link to comment
https://www.sau.com.au/forums/topic/173783-stretched-tyres/#findComment-3195363
Share on other sites

I have 235/45/17 on 9 inch wide rims. Reason - they came that way. And when i replaced the tyres i was scared that any wider would rub.

So you will be fine, i've driven over 100,000km in my r32 with these sized tyres. Its the extreme streching you have to be wary of.

Link to comment
https://www.sau.com.au/forums/topic/173783-stretched-tyres/#findComment-3195673
Share on other sites

Its all about side wall flex and eliminating it. With stretched tires there will be less if any side wall flex which makes the car more predictable and easy to control when drifting.

Also an easy way to fit bigger wheels inside your guards instead on flaring or scrubbing!

Link to comment
https://www.sau.com.au/forums/topic/173783-stretched-tyres/#findComment-3196219
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...