Jump to content
SAU Community

Who Has My Stock Ecu?

adznight

By adznight,
in Victoria

 Share

Recommended Posts

adznight Newbie

adznight

Posted
  • Author
Posted
By any chance you didn't lend it to Steve from AEM, when they were doing tests on your car and playing with the Wolf V5.

Just a thought.

Yeah I thought that this morning also. Sure enough I called them and yeah they did have it.....to bad it was butchered to make a loom adapter. Anyhoo they are going to buy me a new stock ECU.

On a separate note I asked them about the development for the 34 and looks like it's been dropped with no return to the project in sight at the moment. Marc isn't working at the office on Melrich Drive anymore so I'm not really sure what's going on. I know they had some big Subaru fly-by-wire project on. Meh.

Al Grand Master

Al

Posted
Posted

That sucks!!

Any talk of re-embursment? After all they did have your car for an extended period.

I would chase them for an ecu, even if it is a R33 one, then you can sell it. I know someone that will be happy to buy it, at a reasonable price :(. They did promise you a ecu, just because plans have been altered, doesn't mean it is your problem.

I know they have a major headache, at the moment, as the manufacturer for the hand controller, they based the Wolf V5 round, has gone bust and shut down production.

Do you have another ecu to pass epa? Is Pete's the same?

AutoTrust Mentor

AutoTrust

Posted
Posted

Good luck with the EPA Adz, Nissans are way rich stock!

I could do with my stock ECU also as my modded one is still FOOBARed, but GAFFA has obviously found something better to do with it ..... other than return it to me...... grrrr.

Let us know how the test goes.

I miss my skyline, it is but a dirt collector now... ass end on stands.... discarded in favour of a 4.0l VQ 6 speed V40 Navara.

Al Grand Master

Al

Posted
Posted
Yeah I'll be speaking to them when I go down, I had a contract written up. I'll push them for a 33 V500.

I'm gonna borrow Pete's yeah. Lucky huh!

Well let me know, i will be very interested :)

If they give you a ecu, make sure they also supply the adaptor loom.

adznight Newbie

adznight

Posted
  • Author
Posted

Yeah just a "random inspection".

Al - I dug out the contract last night and I've filled my end of the deal regardless whether they finish the 34 ECU or not so I'm going to ask for the R33 model and loom. According to the contract I'm entitled to a "V500 Product" so I'll let you know as soon as I speak with them.

Danny - Cheers mate

Matt - Thanks, got Pete's.

Chinny - PM me your e-mail mate :D

Gazzilla Experienced

Gazzilla

Posted
Posted

Hey Adz, just out of Curiousity, where and when did you get pulled over?.. I was told about 5 weeks ago by a "friendly" coppa that I would be making an apperance at the EPA.. Still have not recieved a letter from them???. whats the deal?

did the Cop like me so much he let me go??.. or he couldnt be bothered filling out paperwork??.. bit confused, but kida happy.

adznight Newbie

adznight

Posted
  • Author
Posted

Age - Gold mate :P

Gazzilla - I was pulled over on Burwood Hwy. This happened just before I went away so it took about 3 weeks for the EPA notice. If he issued you a fine check the notice, towards the bottom on the left you'll see an offense code and next to that it says "EPA" if they are going to report you. If it was OUR lovely coppa then yes, you will get one I'd say.

adznight Newbie

adznight

Posted
  • Author
Posted

Nah had all kinds of drama with Pete's cat. In the end I could not get it on, borrowed another from Scott that night and the flanges were different so I had to rebook again!! Anyhoo, the tyres have been replaced and I have a roadworthy now so I'll get the canary cleared and I can drive it again. Just have to go to the EPA on the 10th now :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...