Jump to content
SAU Community

Recommended Posts

Time for my annual cruise :(

Cruise Details:

Meeting point: Thornleigh McDonalds.

Time:10am for a approx 11am departure

Date:August - 19th - 2007 (this is a Sunday!!!!)

Destination:Wollongong

We will be parking near the lighthouse but not up right near it.. there is a little street we parked at last time that seemed to fit us all in right near the grass!

there is a nice fish and chips type place to grab something to eat.

If there are too many people we might need to find some where else to head.

Re-Group(s)

We will drive past Kripsy Kremes at Liverpool but we will not be stopping, so we can call/sms when we get near if you want to meet us there instead!!

We will probably head up via main roads, then come back via Nasho

if you bring a CB, and I highly recommend you do, we will be using channel 25.

hector st is the final parking spot :D

slight change

we will be STOPPING at Liverpool Krispy Kremes for 15 minutes. with the amount of cars coming I dont think we will all make it thru the lights on the way to KK, so we will re group there and head off..

For everyone meeting at the caltex later on Adam and Shell have my number and probably a couple others there as well so I will call when we leave Krispy Kremes

post-9307-1185770100_thumb.jpg

Please register intrest smile.gif

In:

LIZtotheIZZEH!!

Rukus

Miss Turbo

Secur1ty

d00dz

Craved

skylinegtts

-= SKiZO =-

Shonen

Moanie

Shif_tea

Wink

Shaolin

Corolla92

weeman1

NSA11N

Marsbar

WTF33R

v_s_p_e_c

burnsie

siddr20

Yidz

jago

tbag

Alien

Chris_R33GTSt

boki82

Richieb

rocketeer

Abo Blob

Shell

BLK R33 GTST

ignuz

maybe:

MBS206

goldzilla

Alien

JAS-25T

Dyken

iplezn

russky

cpd

nismo_god

gts4wd

wpn-033

nicsr33

DRD-00F

SAM916

scathing

N1GTR

Sinful

slow ride

dj albert

I am not abo bob..

Link to comment
https://www.sau.com.au/forums/topic/175342-cruise-to-the-gong/
Share on other sites

  • Replies 273
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

OMFG A CRUISEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE

WTHAT THEY f**k LETSSSSSSSSSSSS GOOOOOOOOOOOOOOOO YESSSSSSSSSSSSS

WHOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

+1111111111111

+11111111111111111111111111111111

+1111111111111

+11111111111111111111111111111111

+1111111111111

+11111111111111111111111111111111

+1111111111111

+11111111111111111111111111111111

+1111111111111

+11111111111111111111111111111111

+1111111111111

+11111111111111111111111111111111

+1111111111111

+11111111111111111111111111111111




  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...