Jump to content
SAU Community

Recommended Posts

Time for my annual cruise :(

Cruise Details:

Meeting point: Thornleigh McDonalds.

Time:10am for a approx 11am departure

Date:August - 19th - 2007 (this is a Sunday!!!!)

Destination:Wollongong

We will be parking near the lighthouse but not up right near it.. there is a little street we parked at last time that seemed to fit us all in right near the grass!

there is a nice fish and chips type place to grab something to eat.

If there are too many people we might need to find some where else to head.

Re-Group(s)

We will drive past Kripsy Kremes at Liverpool but we will not be stopping, so we can call/sms when we get near if you want to meet us there instead!!

We will probably head up via main roads, then come back via Nasho

if you bring a CB, and I highly recommend you do, we will be using channel 25.

hector st is the final parking spot :D

slight change

we will be STOPPING at Liverpool Krispy Kremes for 15 minutes. with the amount of cars coming I dont think we will all make it thru the lights on the way to KK, so we will re group there and head off..

For everyone meeting at the caltex later on Adam and Shell have my number and probably a couple others there as well so I will call when we leave Krispy Kremes

post-9307-1185770100_thumb.jpg

Please register intrest smile.gif

In:

LIZtotheIZZEH!!

Rukus

Miss Turbo

Secur1ty

d00dz

Craved

skylinegtts

-= SKiZO =-

Shonen

Moanie

Shif_tea

Wink

Shaolin

Corolla92

weeman1

NSA11N

Marsbar

WTF33R

v_s_p_e_c

burnsie

siddr20

Yidz

jago

tbag

Alien

Chris_R33GTSt

boki82

Richieb

rocketeer

Abo Blob

Shell

BLK R33 GTST

ignuz

maybe:

MBS206

goldzilla

Alien

JAS-25T

Dyken

iplezn

russky

cpd

nismo_god

gts4wd

wpn-033

nicsr33

DRD-00F

SAM916

scathing

N1GTR

Sinful

slow ride

dj albert

I am not abo bob..

Link to comment
https://www.sau.com.au/forums/topic/175342-cruise-to-the-gong/
Share on other sites

  • Replies 273
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

OMFG A CRUISEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE

WTHAT THEY f**k LETSSSSSSSSSSSS GOOOOOOOOOOOOOOOO YESSSSSSSSSSSSS

WHOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

+1111111111111

+11111111111111111111111111111111

+1111111111111

+11111111111111111111111111111111

+1111111111111

+11111111111111111111111111111111

+1111111111111

+11111111111111111111111111111111

+1111111111111

+11111111111111111111111111111111

+1111111111111

+11111111111111111111111111111111

+1111111111111

+11111111111111111111111111111111




  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...