Jump to content
SAU Community

Recommended Posts

Time for my annual cruise :(

Cruise Details:

Meeting point: Thornleigh McDonalds.

Time:10am for a approx 11am departure

Date:August - 19th - 2007 (this is a Sunday!!!!)

Destination:Wollongong

We will be parking near the lighthouse but not up right near it.. there is a little street we parked at last time that seemed to fit us all in right near the grass!

there is a nice fish and chips type place to grab something to eat.

If there are too many people we might need to find some where else to head.

Re-Group(s)

We will drive past Kripsy Kremes at Liverpool but we will not be stopping, so we can call/sms when we get near if you want to meet us there instead!!

We will probably head up via main roads, then come back via Nasho

if you bring a CB, and I highly recommend you do, we will be using channel 25.

hector st is the final parking spot :D

slight change

we will be STOPPING at Liverpool Krispy Kremes for 15 minutes. with the amount of cars coming I dont think we will all make it thru the lights on the way to KK, so we will re group there and head off..

For everyone meeting at the caltex later on Adam and Shell have my number and probably a couple others there as well so I will call when we leave Krispy Kremes

post-9307-1185770100_thumb.jpg

Please register intrest smile.gif

In:

LIZtotheIZZEH!!

Rukus

Miss Turbo

Secur1ty

d00dz

Craved

skylinegtts

-= SKiZO =-

Shonen

Moanie

Shif_tea

Wink

Shaolin

Corolla92

weeman1

NSA11N

Marsbar

WTF33R

v_s_p_e_c

burnsie

siddr20

Yidz

jago

tbag

Alien

Chris_R33GTSt

boki82

Richieb

rocketeer

Abo Blob

Shell

BLK R33 GTST

ignuz

maybe:

MBS206

goldzilla

Alien

JAS-25T

Dyken

iplezn

russky

cpd

nismo_god

gts4wd

wpn-033

nicsr33

DRD-00F

SAM916

scathing

N1GTR

Sinful

slow ride

dj albert

I am not abo bob..

Link to comment
https://www.sau.com.au/forums/topic/175342-cruise-to-the-gong/
Share on other sites

  • Replies 273
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

OMFG A CRUISEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE

WTHAT THEY f**k LETSSSSSSSSSSSS GOOOOOOOOOOOOOOOO YESSSSSSSSSSSSS

WHOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

+1111111111111

+11111111111111111111111111111111

+1111111111111

+11111111111111111111111111111111

+1111111111111

+11111111111111111111111111111111

+1111111111111

+11111111111111111111111111111111

+1111111111111

+11111111111111111111111111111111

+1111111111111

+11111111111111111111111111111111

+1111111111111

+11111111111111111111111111111111




  • Similar Content

  • Latest Posts

    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
×
×
  • Create New...