Jump to content
SAU Community

Snow Mode In The Evo

saff_cossie

By saff_cossie,
in Victoria

 Share

Recommended Posts

saff_cossie Grand Master

saff_cossie

Posted
Posted

Hi all

Having owned the Evo for just over a year now, I thought it was time to try the Snow mode for real in preparation for a planned trip to the snow in a few weeks.

I went up Mt Donna Buang (a recent SAU cruise also went up there) after lunch in Healesville yesterday.

Despite having to pay to go up the mountain at this time of year and having no parking at the last car park before the summit, we had a great time. Took a few pics in one of the lower carparks as all the roads were pretty well salted.

Having only used Snow mode on the DECA skid pan in the wet to any benefit, I was keen to see what it can do and I must admit although I was far from driving hard, it felt a lot more balanced than any other mode.

So to conclude, yes it feels like it makes a difference and gave me a good opportunity for some pics :thumbsup:

post-9226-1183973529_thumb.jpg

post-9226-1183973603_thumb.jpg

post-9226-1183973811_thumb.jpg

post-9226-1183973868_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/175889-snow-mode-in-the-evo/
Share on other sites
Jamezilla Grand Master

Jamezilla

Posted
Posted

Emsta - the ACD settings (Tarmac, Gravel, Snow) adjust the way the car behaves depending on the surface you are on.

By telling the car you are on snow, it limits throttle response and forces a tendancy to understeer when pushed. Basically meaning you just continue to drive the car as you would normally - it makes all the adjustments for the change in surface.

ferni Grand Master

ferni

Posted
Posted

Cheaters.

I drove Beefy's EVO9 on the weekend, very nice i like it. Very punchy/responsive, but lacks top end - but that is to be expected being stock... didn't get a chance to throw it around any corners but it felt responsive steering wise as well.

saff_cossie Grand Master

saff_cossie

Posted
  • Author
Posted

After losing my last reply to a database error!

Thanks all, I had a lot of fun all be it driving quite cautiously due to the weather and having the g/f on board. There is a taboggan run at the top but couldnt get a park so had to come back down unfortunately.

Emsta - As James says.

My understanding is the Tarmac, Gravel, Snow splits the bias to front and rear wheel drive percentage. Snow 50/50, Gravel 60/40, Tarmac 70/30 (rear/front). There are more agressive mods out there to split it further such as MOTEC and there is a Ralliart ACD controller also.

:D

Blade Experienced

Blade

Posted
Posted
My understanding is the Tarmac, Gravel, Snow splits the bias to front and rear wheel drive percentage. Snow 50/50, Gravel 60/40, Tarmac 70/30 (rear/front). There are more agressive mods out there to split it further such as MOTEC and there is a Ralliart ACD controller also.

;)

ratio is always 50:50, acd just controls release time of diff, tarmac - fast / gravel - medium / snow - slowest

eMsta Grand Master

eMsta

Posted
Posted
Emsta - the ACD settings (Tarmac, Gravel, Snow) adjust the way the car behaves depending on the surface you are on.

By telling the car you are on snow, it limits throttle response and forces a tendancy to understeer when pushed. Basically meaning you just continue to drive the car as you would normally - it makes all the adjustments for the change in surface.

ah...so its similar to the Dynamic stability control that we find on BMWs and alike and also like the GTR's, when the front wheels lose traction, the rears hold the traction?

West Grand Master

West

Posted
Posted
ah...so its similar to the Dynamic stability control that we find on BMWs and alike and also like the GTR's, when the front wheels lose traction, the rears hold the traction?

I'm pretty sure its not,

Its the actual torque transfer to individual wheels and its only available from R33Gtr V-spec onward. I don't know much about the Dynamic Stability control, is it a bit like the what they call Brake Distribution Force something?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Manur33
      Vag Coil Diy loom wire guage selection

      By Manur33 · Posted

      Can u check this way it works for power supply?
    • Manur33
      Vag Coil Diy loom wire guage selection

      By Manur33 · Posted

      These coils draw 10amps that what i read online
    • nouveau_poor
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By nouveau_poor · Posted

      I appreciate the detailed explanation, think I understand now. I spent the better part of last night reading what I could about shuffle and potential solutions. I had replaced the OEM twin turbo pipe with an alternate Y pipe that is separated further away from the turbo. The current one is from HKS and I had a previous pipe that was separated even further away, both have shuffle. I had heard that a divider can be welded in to the OEM pipe to remove turbulence, and figure that aftermarket pipes that are more separated would achieve the same thing. From what I read, most people with -10 turbos get shuffle due to their size, though it's a bit less common with -5s on a standard RB26. I think Nismoid mentioned somewhere it's because OEM recirculation piping is common in Australia with -5 cars. It seems that the recommendation tends to vary between a few options, which I've ordered in what I think is most feasible for me:  1. Retune the MAP or boost controller to try to eliminate shuffle 2. Install OEM recirculation piping 3. Something called a 'balance pipe' welded onto the exhaust manifolds. I don't know if kits for this are available, seems like pure fabrication work 4. simply go single turbo My current layout is as follows: Garrett 2860 -5s HKS Racing Suction intake MAF delete pipes HKS racing chamber intake piping hard intercooler piping,  ARC intercooler HKS SSQV BOV and pipe Haltech 2500 elite ECU and boost solenoid/controller HPI dump pipes OEM exhaust manifolds HKS VCAM step 1 and supporting head modifications Built 2.6 bottom end All OEM recirculation piping was removed, relevant areas sealed off I'll keep an eye out for any alternative solutions but can get started with this.  Only other question is, does shuffle harm the turbo (or anything else)? It seems like some people say your turbo shafts will explode because of the opposing forces after a while and others say they just live with it and adjust their pedal foot accordingly. 
    • codygrimm27
      Can you mount the ATTESA pump in other locations?

      By codygrimm27 · Posted

      That worked out PERFECTLY! Thank you big time to JJ. He was able to swap me his stock diff. He drove all the way to me as well. Killer! Removal & install was pretty straightforward. The diff itself is HEAVY. So that’s a 2 man job.  Man does the car drive nice now! Couldn’t have worked out any better 👌
    • DannyDee2
      First time owner v35

      By DannyDee2 · Posted

      Welcome mate!
×
×
  • Create New...