Jump to content
SAU Community

B Pillar Floor Brace

DaGr81
 Share

Recommended Posts

Beer Baron Grand Master

Beer Baron

Posted
Posted

passengers can use them to dislodge bits of dirt stuck to their shoes. or if you are in law enforcement you could use it as an achorage point for leg restraints. apart from that they are almost as usefull as tits on a bull.

PM-R33 Grand Master

PM-R33

Posted
Posted
passengers can use them to dislodge bits of dirt stuck to their shoes. or if you are in law enforcement you could use it as an achorage point for leg restraints. apart from that they are almost as usefull as tits on a bull.

HAHAHAHA thats awesome!

Yeah i always thought they did fark all

STATUS Grand Master

STATUS

Posted
Posted
thinking of adding more rigidity to car for a bit better handling etc etc, want to know if anyone has tried a b-pillar floor brace? was it good? any noticeable difference?

cheers in advance for advice/comments

They do nothing unless tied to the trans tunnel like the one below.

tokojaws_s.gif

BHDave Grand Master

BHDave

Posted
Posted (edited)
someone was using it as a fire extinguisher mount - I reckon that's not a bad idea

That was me, but in all honesty you could mount it to the vertical bit of chassis between the floor and the base of the back seat

Edited by BHDave
Eug Grand Master

Eug

Posted
Posted

i think the gains if any are quite marginal... there's more to be had by spending the money on other areas of adjustment.

that said, the wank factor of having a floor brace is cool ;)

it's like saying i'm a hardcore racer with the "roll cage" which does nothing, but people don't know that :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...