Jump to content
SAU Community

R33 Gtst Vs 350z

HotPlates
 Share

Recommended Posts

NISMO Grand Master

NISMO

Posted
Posted
I ran a 13.4 on a stock 33 with exhaust....thats pretty quick....what has a stock 350 run?

id like to think that over 400 metres the line would catch up....crossing the line at 103mph....

Mate, that is an awesome time for a 33 with nothing but exhaust.

What kind of rubber were you using?

You must have got off the line quicker than Kate Moss when there's a camera in the room :-)

scathing Grand Master

scathing

Posted
Posted
I ran a 13.4 on a stock 33 with exhaust....thats pretty quick....what has a stock 350 run?

A stockish 350Z would struggle to run mid 13's. Maybe on cheater slicks it could run a 14 flat or a high 13. Most of the car mags have an Australian delivered Z33 running 14.3-14.5. The US ones made a bit more power, so they dipped lower into the 14s.

I've G-Tech timed myself (on a private road, of course) at 13.8, but my car's got most of the pipework replaced as well as a few other bits and pieces. I think that, with a better driver and tyres that haven't been ruined by countless skidpan events, it might run a 13.5 but I doubt I personally will be achieving that in the near future.

id like to think that over 400 metres the line would catch up....crossing the line at 103mph....

It should. My trap speed with just a catback and completely f**ked RT215s was 100mph. So against a stocker you should reel a stock Z in.

Nismo_God Veteran

Nismo_God

Posted
Posted

You cant compare the maunfacture spec tho....i find that they are way off....you never really see them below 14 seconds...

I was surprised with the 300C it ran a 13.5 stock....thought that massive thing would be over 14.....or more surprising a jeep, not sure what it was, but it ran a 13.2, thats crazy speed...

  • 5 years later...
ZiAzon Apprentice

ZiAzon

Posted
Posted

Sorry to necro this post I can't help but reply, I have a stock auto R33 GTST Sedan... Just beat a 350Z... They do have you from 0-100 but after that, wooshhh the R33 is off. This is from a rolling start though, 40km/hr, I hit 180km/hr and was half a car ahead and still gaining.

tripsteady Proficient

tripsteady

Posted
Posted

Tried telling my mate this.

He did not agree.

ive got 3inch straight through, pod , splitfires & installing boost controller and FMIC next friday and turning it up to 10psi.Running ku31's all round with pedders xa coils. So just basic mods... Mate has a stock 350 ready to race.

Guess I'l have to video it and we'll see..

Super Drager Mentor

Super Drager

Posted
Posted

ive got 3inch straight through, pod , splitfires & installing boost controller and FMIC next friday and turning it up to 10psi.Running ku31's all round with pedders xa coils. So just basic mods... Mate has a stock 350 ready to race.

Guess I'l have to video it and we'll see..

You will destroy the 350Z, the last few 350's i raced at WSID were 1/10th slower than me. The only one that beat me was a newer model that out launched me and did a 14.2-14.3 sec pass with identical MPH to me. PS this is in a NON TURBO 300zx.

PN-Mad Grand Master

PN-Mad

Posted
Posted

FYI the fastest "stock" 350z time, Stock as in right down to the tyre, was a 2007 car. Thats a HR motor.

13.150 @ 107.62mph

2.027 60ft.

something to think about...

http://my350z.com/forum/drag/233840-top-25-1-4-mile-times-for-tt-st-supercharger-nitrous-bolt-ons-stock.html

Super Drager Mentor

Super Drager

Posted
Posted

FYI the fastest "stock" 350z time, Stock as in right down to the tyre, was a 2007 car. Thats a HR motor.

13.150 @ 107.62mph

2.027 60ft.

something to think about...

http://my350z.com/fo...-ons-stock.html

There's a 10MPH variance between cars there, never seen a 350Z do anywhere near those times bog stock or trap that sort of mph.

Super Drager Mentor

Super Drager

Posted
Posted

Its all been verified as the site says. There is no argument to be had.

13.65 @103.5

Thats an ADM 2009 model. With a slip.

Not arguing, all i'm saying is i have never seen one go that quick or trap that speed. Just trying to figure out why there is 10MPH variance between bone standard cars. Only things i can think of are large altitude differences and the fact that a few of the US tracks aren't exactly "flat" (read: downhill).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...