Jump to content
SAU Community

Buying A 32 Gtr, Looking For Mechanics...

JimmyRickard

By JimmyRickard,
in New South Wales

 Share

Recommended Posts

JimmyRickard Mentor

JimmyRickard

Posted
Posted

I'm currently in the market for an R32 GTR. A mate of a mate is sellng his, so I went and had a look at it and was very impressed. The paint was in good condition, the body was straight (as far as I could tell) and completely original inside and out, which is what i'm after. The engine has had a complete rebuild, with forged pistons etc, but not highly boosted (9-13psi from memory), and an intercooler and the rest of the usual stuff. All in all it looked and sounded good. The guy took us for a drive and the car didn't miss a beat, seemed a bit docile when not on boost but pulled hard when it was. Anyway, my brother who is a mechanic of sorts found it to be in pretty good condition and we were both impressed with the car.

However, since its an '89 model, I dont want to take any risks. The car's in Sydney, and i want to take it to a skyline specific workshop to get it looked over, or have someone come out or something, and get the engine/gearbox checked out specifically. I get the feeling there may be no receipts or warranty from the engine rebuilder so i want to be sure.

Can you guys suggest any workshops or mechanics in the SYdney area?

What are some other things I should be looking out for?

Cheers!

JimmyRickard Mentor

JimmyRickard

Posted
  • Author
Posted

Seeing as BEL is around the corner in regents park i might go with them.

Are these guys very familiar with Skylines?

What kind of inspection should I be asking for, and how much will I be looking at getting all this stuff looked at?

Also, anyone know where i can get a wheel cap fot the original wheels? Its missing one of the caps "we produced on spartan air" or something.

Blitz Grand Master

Blitz

Posted
Posted

As above, call Croydon Racing Developments and speak with Jim or Lance - 96484264

I have had a full pre-purchase inspection done there for the buyer of one my previous Skylines and they were extremely thorough. Their inspection includes everything from a full body/chassis inspection, to Dyno and engine check.

TTT Grand Master

TTT

Posted
Posted (edited)
Southwest sydney area, the car's in greenacre so somewhere in that area

sounds like a good enough reason not to buy it..

make sure all the numbers are checked.

vin, engine, rego.

I think there is a way to see if a number has been filed off and re-punched too.

get that check

check for new welding around the firewall.

Edited by GTST
JimmyRickard Mentor

JimmyRickard

Posted
  • Author
Posted (edited)
sounds like a good enough reason not to buy it..

make sure all the numbers are checked.

vin, engine, rego.

I think there is a way to see if a number has been filed off and re-punched too.

get that check

check for new welding around the firewall.

Which is why i want it fully checked out. I'm going to have a look at a few others first before I make a decision, but from what i've seen it's in great condition, and with the work its had to done to it, its going pretty cheap. However i'd prefer a more expensive, better quality GTR as opposed to a cheap shitbox, so i'm keeping my options open. A mate put me onto this guy, so i'll give him the benefit of the doubt (before any money changes hands anyway).

Is it worth doing a leak-down test? Or will a compression test and Dyno be enough?

cheers

ALSO: What kind of mileage is acceptable for these cars? i'm looking between 80-110xxxkms to be realistic, but some on Carsales have like under 60k which sounds like bullshit to me. Will the mechanics be able to give me an estimate of it's use?

Edited by bigjimmystyle
Beer Baron Grand Master

Beer Baron

Posted
Posted

32 GTR with less than 100,000kms is very rare. plenty of them show less than 100,000 but not many have actually done that few. I mean in 18 years 60,000kms... 3300 kms a year. hmmm.

I would get the leakdown test done too.

realistically you are looking at between 100-200,000kms.

Swiper the Fox Grand Master

Swiper the Fox

Posted
Posted
Given the less-than-stellar attention to detail at the last BEL Garage dyno night, I don't think I'd be taking my car there....

For a thorough going over id take it to Croydon's as per Blitz' post

JimmyRickard Mentor

JimmyRickard

Posted
  • Author
Posted

Nah it's gunmental grey, looks completely stock.

I'll have a chat to the guys at DART and Croydon and make my mind up form there. More importantly I want to speak to the engine builder to hear what exactly he's done.

Thanks for the help guys!

  • 2 weeks later...
HighOnSky Newbie

HighOnSky

Posted
Posted

On this subject, I have a basically stock R33, and live in the Hills area of Sydney. The places suggested are a bit far away for me. Can anyone suggest a good place in this neck of the woods for servicing and repairs? Thanks in advance!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...