Jump to content
SAU Community

Recommended Posts

You're thinking along the lines of the previous owner of my car with the battery placement.

Any particular reason for putting the switches on the tunnel and not in the centre console?

I can't take credit, a mate did it on his car, then installed it on mine :D

I'm going to be mounting the fuse box in front of the shifter, which is why I'm putting the switch panel where it is. I have an ERP bellhousing for my RB25 gearbox, and it moves the shifter forward. I didn't want to hit any switches with my clumsy shifting :) I have long arms, so I can still reach it where it is, but I might extend my shifter so I don't hit anything with my elbow.

Mick: nice looking setup there man. I'm trying to get my fuel system done at the moment, but the guy doing my enclosure has just pulled out so trying to get another one done. Never ending delays...

Been doing the rest of the sound deadening today, gave myself a nice cut which i then managed to bash a few times :unsure:

Only the trans tunnel and behind the pedals was left to do so i used a heat gun and scrapper, wasnt too bad a job. Cbf going to get more dry ice :(

I also decided that since i have come this far im going to remove whats left of the dash and take out the heater etc and paint it properly and re wire with minimal wires.

have you go the measurements for that? is it a zeta type 3?

I just picked up a plain black Bride Zeta type 2 Type L from JDM Concept on the forum...

(Care to pm me price you paid)

cheers

Michael

Yeah they were great to deal with.

Anyway did u use the low max rail as well, how much did it lower you roughly. I have issues once i have my helmet on because i have a sunroof, that is 90% of the reason i have thsese seats so im going to be a bit pissed if i still have a problem.

cheers

mine isnt no where near finished yet but here are some photos

it isnt a skyline as u can see

engine is being built (well not right now because i ran out of money) SR20DET bottom end with SR20V cylinder head

this is wat the engine use to look like b4 it under went the SR20V cylinder head conversion

CIMG0351.jpg

100_0228.jpg

DSC00366.jpg

DSC00356.jpg

DSC00368.jpg

DSC00376.jpg

23072008395.jpg

CIMG0455-1.jpg

IMG_1309_resize.jpg

CIMG0453.jpg

Edited by STR8E180
Whats with the catch can setup in the engine bay?

Can understand why you ran out of money , lots of big dollar parts there :blink:

i got defected for having a breather on the catch can after the defect change the catch can setup so that the breathers are hidden in the airbox while i was there we added another catch can

CIMG0344.jpg

CIMG0347.jpg

CIMG0345.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...