Jump to content
SAU Community

Recommended Posts

Hey guys, anyone know any good places to park in the city near Flagstaff gardens? I know that Vic Market has parking for $10 the whole day on Weds or something. Anyone know any other cheapy places? thanks guys!

very cheap

I park at QV when in the city. $12 I think.

10 bucks is soo cheep~!!!

I usually park at carpark building at William ST and Lt Lonsdale..

there early bird is $16...

but if u r not early bird QV also good place... coz there just $12....((but u have to spend over $1...))

theres a carpark in the city for $4 a day, but its behind the exhibition building.. bit too far for ya,

i say stick to the vic market... its close and like everyones said its really cheap for the city dude, especially cos its around the corner from your work

What's wrong with public transport? (what's right with it? :( )

I want to drive out when I finish work on Friday...Hate having to catch a train back to sunshine and then drive back to the city....

Does anyone know how much Crown charge these days??

I always get free parking there, so I have no idea.

I was trying to look it up on the website but it's been blocked on my work computer damn....hahahaa

very cheap

I park at QV when in the city. $12 I think.

sure is. spend atleast $1 and the whole days parking is $12

i work at sensis which is right ontop of QV carpark so i park there often and thats the cheapest around.

theres crown also which is $5 i think but then u have to catch a tram to where you wanna go and all so it gesta annoying. QV is more central.

i used to park at qv. but it is kinda decieving. to spend that dollar each day and try to find something you need that cheap is a pain. lol safeway gets overrun every day at 5 pm.

i know its quite far away but the jam factory has $7 all day parking. theres also a all day free park located somewhere in the proximity of the alfred but i have never found it. and hints?

there is a place in carlton near rmit just off lygon st where you can park for free all day.

that's where i used to park when i had long hours at uni

EDIT: where the feck is Flagstaff gardens? lol

umm, near flagstaff station?

right next to the courts. >_<

jam factory is a bit far... =/

Find any spot, wait till no one is looking, introduce your foot to the parking meter, Once it is buggered ring the number on the meter, tell em its buggered and your location, tell them u cant park anywhere else. they will withdraw any Fine imposed on your car. Happy days.

P.S. parking inspectors are scum of the earth.. i dont give a shit what anyone rekons.

Find any spot, wait till no one is looking, introduce your foot to the parking meter, Once it is buggered ring the number on the meter, tell em its buggered and your location, tell them u cant park anywhere else. they will withdraw any Fine imposed on your car. Happy days.

P.S. parking inspectors are scum of the earth.. i dont give a shit what anyone rekons.

lol now how hard would one have to kick lol

ye i hate parking inspectors to. i got a parking fine coz the car parked behind me was a little in my lane and my front lip was just past the loading bay zone and i got a $125 parking fine.

called up and wrote in to get out of it and i got rejected.

so i het them also.

lol now how hard would one have to kick lol

ye i hate parking inspectors to. i got a parking fine coz the car parked behind me was a little in my lane and my front lip was just past the loading bay zone and i got a $125 parking fine.

called up and wrote in to get out of it and i got rejected.

so i het them also.

I dont hate them.... I despise them!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...