Jump to content
SAU Community

Recommended Posts

because it was on a downhill use that as an excuse for the car rolling faster than what you thought u were driving?

Few things shit me more than people that can't maintain their speed up/down a hill.

On topic: give it a go but like others, I don't like your chances.

Link to comment
https://www.sau.com.au/forums/topic/179819--/#findComment-3272836
Share on other sites

LOL

oh man, same here - they must've send them all out at once!

but i got pinched doing 74 in a 60 zone, same fine and demerits though

i even enquired with some Nyman Gibson lawyer guys online about their claim that almost any multinova rap is beatable, back when i initially saw the suspicious flash.

a few emails back and forth and all i really got from it (without outlaying cash or time i could better spend laying down) was:

"We are in NSW, and the law is no doubt different. However, if the WA people are using the same equipment they use over here, then they are NOT always right! If you are going to defend it, you want to get a copy of the maintenance logs for the particular camera to see if it has been regularly calibrated in accordance with the manufacturer’s guidelines, and see whether it has frequently broken down. Put it this way – they are not going to tell you unless you ask."

...bla bla boring

sure sounded like it was going to be a lot of trouble to me, just cough up the money bro

better than the fine getting any higher due to court costs, late fees or purely annoying the brass

i already miss my clean record :(

Link to comment
https://www.sau.com.au/forums/topic/179819--/#findComment-3274772
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
    • Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
    • Do you have some data like fuel pressure? It's really hard to say if you're still fighting a fuel system issue at this point. Could be something weird like the FPCM dipping out.
    • Yeah in that case, pulling the dent out. Event a very slight dent can create a lot of work filler-wise and there is a strong chance the panel won't be the factory shape when you are done (as the dent will result in a new high point created somewhere, then everything is brought up to that new high point... but the panel shouldn't be that high if that makes sense).  So you've filled and primed the panel and it is flat, why would you go back and remove the primer and add more filler? 
    • Something else I have been faffing with while the car was off the road is making the AC work. Assuming the car isn't at a thermal limit the idea of having AC while waiting in line to go on track sounds delightful. I have actually been lugging around the weight of the entire system since 2018 when the RB25NEO went in without it working at all.  The main reason was in the first few events before I got around to re-gassing it the rubber hose that runs under the manifold had the factory heat wrap/sleeve fail resulting in this: ~2 years ago I purchased a complete used R32 AC line set but when I finally went to install it the line i needed was different where the expansion section is I found a local place that was able to replace the rubber section and re-crimp. They also added some modern heat sleeve to the hose Tight fit but fingers crossed this is the last physical piece of the puzzle needed
×
×
  • Create New...