Jump to content
SAU Community

Fibreglass Bonnet

Vince66au

By Vince66au,
in Queensland

 Share

Recommended Posts

Col-GTSX Grand Master

Col-GTSX

Posted
Posted

I guess you need to look at why their not ADR approved, then understand why a stock bonnet is th ebest thing to use.

In short no fibre glass bonnet will be approved for road use in Australia, basiclly cause they dont crumple in n accident, then slice into human flesh like a knife on impact.

The have even gone through glass and hit the driver of the car in past cases. Not pretty im sure you understand why their not ADR approved...

In short get a stock bonnet asap.

Dantay Rising Star

Dantay

Posted
Posted
I guess you need to look at why their not ADR approved, then understand why a stock bonnet is th ebest thing to use.

In short no fibre glass bonnet will be approved for road use in Australia, basiclly cause they dont crumple in n accident, then slice into human flesh like a knife on impact.

The have even gone through glass and hit the driver of the car in past cases. Not pretty im sure you understand why their not ADR approved...

wow good point! i would be so pissed if i got cut in half by someones bonnet

Vince66au Contributor

Vince66au

Posted
  • Author
Posted

thanks to all u out there..to technically ..yeah screwed..but ill keep my fingers crossed and whn a fine do come along..then look for a normal bonnet...ill upload my pic...yet it looks so sick....

so_tred Proficient

so_tred

Posted
Posted (edited)
In short no fibre glass bonnet will be approved for road use in Australia, basiclly cause they dont crumple in n accident, then slice into human flesh like a knife on impact.

Blitsbodykits do a fully ADR approved bonnet for all Skylines :thumbsup:

aj performance are doing carbon ones with ADR soonish

I've been waiting out for this for a few months now, I wonder if it's ever going to happen.. :P

Edited by so_tred
Col-GTSX Grand Master

Col-GTSX

Posted
Posted
Blitsbodykits do a fully ADR approved bonnet for all Skylines :thumbsup:

I should refrase...

All of the cheap knock off bonnets are straight fibreglass. Which cant get ADR approval due to their impact qualities. (ie. snap and cut rather than bend and crumble)

But some bonnets (ie brand name, costlly $3000+) use a kevlar/carbon compound with the fibreglass to give it a dull edge if the bonnet were to snap (ie. car accident).

Noy works for a carbon shop, he would be able to explain the in's and out's of fibreglass legality better than I...

But as I understand it, to make them cheap the company's dont go throught the ADR approval process as is rather expensive and would make the bonnets quite costlly...

Obviouslly then they would be in direct competition with the big boys like "blitz" or "Veliside"...

Some of the bonnets could be fine and pass the test with flying colours, but its the cost to do the tests that most companys dont under go. Hence why few imported body kits are legal...

Col-GTSX Grand Master

Col-GTSX

Posted
Posted
There are ADR approved fibreglass bonnets with vents for under $1000
The blitsbodykits ones are only $770...nowhere near $3000 :(

Would be interesting to see if they actually are listed with the transport department or if they are just saying they are ADR approved.

Reason I question it was a few month back ACA ran a story on bullbars and how companys were making them and putting the ADR sticker on the bar for airbag complience when the bars were never tested. Not saying thats the case with these, but something I didt consider when making my statement was the aussie dollar is quite strong atm which has made the price crash on many imported items, materials and so forth. So it could be possible i guess, At $800AUD thats a good buy!

Dantay Rising Star

Dantay

Posted
Posted (edited)

noob question, how much lighter is a fibro bonnet. i have been wondering which is the cheaper option going for more power ie upgrade turbo/zhuast or putting the car on a diet?

anyone done both?

Edited by Dantay

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Slight brake pedal stutter after new pads

      By MBS206 · Posted

      Jack the back of the car up, pull that wheel off, pull that sensor out, and put a bore scope into the hole to inspect the outer casing, see if anything looks damaged before you pull the whole thing apart.
    • PranK
      Slight brake pedal stutter after new pads

      By PranK · Posted

      Ergh... So I pulled the speed sensor out again and the tip was shiny so I think it's rubbing the bearing. The bearing contains the magnets for the speed sensor so I think when the first sensor broke it damaged the magnet ring on the bearing.  This is just a Google image, but there is a hole going to the bearing. So when the tip broke off the old sensor I'm guessing it fouled the bearing... As the magnet is only protected by a plastic cover it would be easy to damage it. So I guess I'm doing a bearing again.   
    • GTSBoy
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By GTSBoy · Posted

      My thinking is that if the O2 sensor is shot then your entire above described experience is pure placebo.
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      Here is the mess that I made. That filler there was successful in filling dents in that area. But in the middle area. I can feel dents. And I've gone ocer it multiple times with filler. And the filler is no longer there because i accidently sanded it away. I've chased my tail on this job but this is something else lol. So I'm gonna attempt filler one more time and if it doesn't work I'll just high fill primer the door and see where the issues are because guidecoat is of no use atm.
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      Ok, so I think I sort of figured out where I went wrong. So I definitely overthinked it, and I over sanded, which is probably a large part of the problem. to fix it, I ended up tapping some spots that were likely to be high, made them low, filled them in, and I tackled small sections at a time, and it feels a lot better.    I think what confused me as well is you have the bare metal, and some spots darker and some are lighter, and when I run my finger across it, it' would feel like it's a low spot, but I think it's just a transition in different texture from metal to body filler.    When your finger's sliding on the body filler, and crosses over to the bare metal, going back and forth, it feels like it's a low spot. So I kept putting filler there and sanding, but I think it was just a transition in texture, nothing to do with the low or high spot. But the panel's feels a lot better, and I'm just going to end up priming it, and then I'll block it after with guide coat.   Ended up wasting just about all of my filler on this damn door lol  
×
×
  • Create New...