Jump to content
SAU Community

Recommended Posts

With regards to the idler..

When I built my motor up Nissan wanted something silly for the idler, instead I opted for 2 tensioners.

The nissan RB tensioners are locking tensioners so once locked it acts the same as an idler.

RB30 tensioners from holden also do the trick, they were cheaper than nissan, if I remember correctly around $80 each.

  • 5 months later...
  • 3 months later...
Wrong, Only gts-t Type M has the 4 piston caliper like the z32.

Regular gts-t like mine, have the s13 200sx brake.

i believe that is true from the factory but nearly every single r32 gtst i know has the z32 brakes...

they cant all be type-m! :D

also i've been using these oil capacitys with no problem!?

engine: 4L

gearbox: 2L

diff: 1L

cant remember where i got these from but they all sit on full with these amounts in them!

  • 4 weeks later...

i put 5L in my hcr32 and it sits right on full. ive read in a lot of places that 4.6L is correct fill when dropping oil and changing oil filter.

also does anyone have detonation/knock sensor part number. for the back one

  • 2 weeks later...
i believe that is true from the factory but nearly every single r32 gtst i know has the z32 brakes...

they cant all be type-m! :)

also i've been using these oil capacitys with no problem!?

engine: 4L

gearbox: 2L

diff: 1L

cant remember where i got these from but they all sit on full with these amounts in them!

Well you're doing something wrong

The actual amounts are around:

Engine: 4.6-4.8L

Gearbox: 2.2-2.5L

Diff: 1.5L

  • 11 months later...
  • 1 year later...

sorry to bump this cos its old as but i found this yesterday

R32 Gts-t

4PK0860 Belt Alt

4PK0950 Belt P/S

4PK0925 Belt A/C

94988 Belt Cam (PTFE)

KTBA173 Kit Cam

DT19E Thermostat

DTG18 Gasket (Paper Type)

DTG45 Gasket (Rubber Type)

R32 GTR

4PK0880 Belt Alt

4PK0950 Belt P/S

4PK0925 Belt A/C

94988 Belt Cam (PTFE)

KTBA173 Kit Cam

DT19E Thermostat

DTG45 Gasket (Rubber Type)

Does anyone have the part number for a gtst o2 sensor (the ford one will do)

  • 1 month later...
sorry to bump this cos its old as but i found this yesterday

R32 Gts-t

4PK0860 Belt Alt

4PK0950 Belt P/S

4PK0925 Belt A/C

94988 Belt Cam (PTFE)

KTBA173 Kit Cam

DT19E Thermostat

DTG18 Gasket (Paper Type)

DTG45 Gasket (Rubber Type)

R32 GTR

4PK0880 Belt Alt

4PK0950 Belt P/S

4PK0925 Belt A/C

94988 Belt Cam (PTFE)

KTBA173 Kit Cam

DT19E Thermostat

DTG45 Gasket (Rubber Type)

Does anyone have the part number for a gtst o2 sensor (the ford one will do)

HCR32 o2 sensor part number : 2269073L11

got this when i rang nissan and ordered one for my gtst

they didnt have any instock so had to order from japan

which is about 10 work days.

cost me $184

  • 3 weeks later...
HCR32 o2 sensor part number : 2269073L11

got this when i rang nissan and ordered one for my gtst

they didnt have any instock so had to order from japan

which is about 10 work days.

cost me $184

thanks but i think i'll go with one from here

http://www.kudosmotorsports.com/catalog/ng...25det-p-42.html

seems a lot more reasonable

  • 8 months later...
  • 1 year later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kittens in first to claim dominance of the residence, then puppies later From past experience, the other way around can be problematic to say the least  Those weird "Dobby looking"  little kittens are not cheap....LOL
    • At least yours have parkour down pat. One of mine will still trip over his own shadow and fall over... He's a special type of cat... Ha ha ha
    • The question then becomes - was there any fluid coming from that hole before you did the rebuild ?    You may not have noticed, of course.   Depending on how you did the rebuild, the possibility has to be considered that somehow (cleaning ?)  fluid entered that hole and is now being 'forced'  out by small movements of the proportioning valve.   From the factory, there's actually a small rubber plug in that hole but with age and under-bonnet heat it's quite common for it to 'go missing'.  That rubber plug is designed to allow the venting process but also to prevent 'stuff' getting to the area (prevent corrosion, etc).   The plug is also not available as a spare part AFAIA. Personally I wouldn't race and buy a new master just yet but keep an eye on the area to see if the 'leak' continues.   If you're concerned about brake fluid damaging nearby paintwork, cable tie a piece of suitable absorbant material over the hole and remove/monitor occasionally.    Operation of the proportioning valve and the brake master itself won't be affected, but also keep an eye on brake fluid level, of course. In terms of a new master, the genuine part is getting expensive, unfortunately.  Amayama is showing AUD900+.   I was searching recently and there's an aftermarket part available from Japan made by 'Parts Assist': https://zenmarket.jp/en/yahoo.aspx?q=BNR32%2bBM50&p=1 Whether it's any good I have no idea, although in my experience Japanese aftermarket stuff is pretty good quality-wise.   The above site allows overseas buyers to purchase stuff more easily from Japan but there are fees and shipping costs, of course.   The original Japanese seller page is here: https://auctions.yahoo.co.jp/jp/auction/p1197401228 Copper/Nickel is fine but I still prefer bundy tube and it's also cheaper.
    • Your chihuahuas look weird!
×
×
  • Create New...