Jump to content
SAU Community

Recommended Posts

Yeah i do the same as N15MO, $2 at carlovers sometimes its $3.

Because you got to watch em.

When you use the high pressure soap it takes half ur bloody time to come out and when you want to wash it off it takes half the time for the soap to clear out and you have to put more money in to wash the rest of the soap off Grrrrr.

Edited by subzeroR33
  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

sure you can - what are they going to do? send you on your way?

although if there are people waiting i'll usually have coins going in. it would be annoying waiting for someone who is not paying. you could always soap it up while your waiting for other cars...

My car is dirty...cruise to boobs wash?

Don't talk to me about that boob wash!

A few months back, I wanted to pass a few trucks on Abbotsford Rd. took the inside lane and planted my foot... almost collected a pink mazda 121 with 'Nude Carwash' plastered all over it!

my bad for passing on the inside. now EVERY time I drive that way, I'm on the lookout.

Andy, Noel, looking for a full report! :pics or ban

Don't talk to me about that boob wash!

A few months back, I wanted to pass a few trucks on Abbotsford Rd. took the inside lane and planted my foot... almost collected a pink mazda 121 with 'Nude Carwash' plastered all over it!

my bad for passing on the inside. now EVERY time I drive that way, I'm on the lookout.

Andy, Noel, looking for a full report! :pics or ban

rofl. I dont even know where it is pear. besides, today is not a good day for a car wash. it would be covered in road splash by the time i got home.

I dont need to see flat boobs that bad. :laughing-smiley-014:

rofl. I dont even know where it is pear. besides, today is not a good day for a car wash. it would be covered in road splash by the time i got home.

I dont need to see flat boobs that bad. :laughing-smiley-014:

You wanna know how I know you are gay?

You will go and watch knuckle dragger's drive in straight lines at the drop of a hat but don't want to see flat boobs :rolleyes:

You wanna know how I know you are gay?

You will go and watch knuckle dragger's drive in straight lines at the drop of a hat but don't want to see flat boobs :rolleyes:

You didnt call me gay when i f**ked you last night. "Give it to me BIG GUY" wasnt it?? :laughing-smiley-014: :laughing-smiley-014:

You didnt call me gay when i f**ked you last night. "Give it to me BIG GUY" wasnt it?? :laughing-smiley-014: :laughing-smiley-014:

You are confusing me with Shane again! And I really doubt he said BIG

So sad how old age senility effects people :thumbsup: ha ha

hey guys i just bought my car and it was sitting at a wharf or some crap for a year and is really dirty and i tryed cleaning at the sar wash and even again at home and itstill pretty bad. where and how much would it cost to get a full detail and bring up the coliur and a engine detail??.

thanks

hey guys i just bought my car and it was sitting at a wharf or some crap for a year and is really dirty and i tryed cleaning at the sar wash and even again at home and itstill pretty bad. where and how much would it cost to get a full detail and bring up the coliur and a engine detail??.

thanks

some cleaning wax should work for u.. unless it went past the clear coat.. has it.?

I tend to go to the Car Lovers on Logan Rd at Underwood later on at night through the week.

There's never a queue so you can take as long as you like and chamois in the bay under the lights. There's no staff there at night either to kick you out for bucket-washing or taking a muddy fourby through etc.

There's also a servo within walking distance if you need change! :)

I tend to go to the Car Lovers on Logan Rd at Underwood later on at night through the week.

There's never a queue so you can take as long as you like and chamois in the bay under the lights. There's no staff there at night either to kick you out for bucket-washing or taking a muddy fourby through etc.

There's also a servo within walking distance if you need change! :)

yeah i drive past that one often.. lots of lots ther and a vacuum too i think.. how much is it for a rinse with the Pressure hose?

My only advise. Go to Carlovers if you don't want to pay too much, do it yourself NEVER use the brush unless its on the wheel arches of your muddy 4wd. By a decent wash mit and microfibre chamois so as to not induce swirls.

I have found a certain carwash at a certain Albion location that induces swirls and then offers you details to remove them...how nice they are.

If you want to see swirls, click on the link in my sig and find the black evo with 15,000kms on it and see what bad car washes can do...

some cleaning wax should work for u.. unless it went past the clear coat.. has it.?

no i dont think i have its just really dirty and has alot of sratchs. but yea ill be trying a polish and wax soon and ill see how i go.

thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...