Jump to content
SAU Community

Recommended Posts

We tuned the car, then a few days later ran it up again and the AF curve was the same shape, but from say 12.5:1 average to 13.5:1, we were puzzled with what was going on, stuffed around a bit and cleared the computer and went back to normal, so not sure what it was "self learning" or if it can really do that but something was a bit weired. We asked pete about it and he said he never seen it before and few other people said the same, but i don't know how many people bring it back to redyno it to check. Mind you seems to be fine again now?

I have seen this on one specific ECU where it would carry the LTFT data through to open loop - real pain in the arse. There is another PID than just AF learning I think it is AF correction and the only scan tool I've seen that can pick it up is the Nissan version of MDM100.

Also how is it doing boost control in a BNR32 ECU is it a single row of DC?? I have used the std boost control throught the s14 ECU but didn't know it was possible in the BRN32 ECU - but I've never really looked for it.

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/5/#findComment-4302678
Share on other sites

what about using a z32 ecu, have you played with this option yet, if you can get it to work in sure a lot of 33 owners would be interested.

if your on a budget and dont mind compromise i am happy to do the Z32 and R32 ecu's into R33 but PFC is a better option (IN r33 rb25det).

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/5/#findComment-4302732
Share on other sites

anyone?

All I can think of, is i've been led to beleive the R33 GTR makes more torque than the R32 GTR because of the ecu, so by going with the R32 ecu, you'll be working with the R32 basetune instead of the R33 one.

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/5/#findComment-4306871
Share on other sites

anyone?

Why R32 ecu? From what I understand they have issues with the TPS sensor, cannot control the NVICS system and contrary to popular belief are not straight plug in ( need to switch inj 4 & 6).

There are advantages I can see going this way is that you get to use both knock sensors and exhaust temp sensor.

Much better alternative is the Z32 ecu imo.

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/5/#findComment-4306887
Share on other sites

interested in the nistune for my r33, so what is the compromise by using the r32 ecu? how much it it to go this way

Additional wiring is needed for an RB20 TPS for improved driveability, idle control, return to idle, etc, and a cheap VCT such as Buddy Club VCT controller etc can be used for the cam timing control, but it can be done to provide a reasonably good result. The best option is a remap of the R33 ECU - Nistune software can be used with an emulator, but not the functionality of Nistune boards in terms of simply pluggling the cable in and away you go, data is still required to be put onto an eprom when done. Any other real time emulation for 256k eproms can be used once the RB25 ECU is modified. Unfortuantely, when the dollar was still strong the RB25 boards were expensive, even more so now... But still cheaper option than trying to spurce a R33 GTST Power FC which are usually priced according to their construction of unobtainium.

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/5/#findComment-4306947
Share on other sites

R34 gtt and R33 gtst plugs are about the same as cats and dogs unfortunately.

Maybe an adaption harness could be made up :( .......

http://www.rhdjapan.com/jdm-low/FIELD-One-...issan-PT2-55226

with.

http://cgi.ebay.com.au/Nissan-76-Pin-ECCS-...p3286.m20.l1116

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/5/#findComment-4307793
Share on other sites

  • 4 weeks later...

hey guys, read through all the threads, I have an R33 and like everyone else I'm keen on the NIStune setup. I see you can use teh Z32 ecu's and have them chipped, other than the cost of the set up, whats the compromise going with the Z32 configuration? (Yes I know you have to redo the wiring slightly) but performance wise? configuration?

Cheers,

Matt

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/5/#findComment-4342532
Share on other sites

  • 2 weeks later...

But have they got it working with the stock boost control solenoid? I know they got it to work with an S15 but last time I spoke to Pete he said they hadn't worked it out yet for R32 GTR.

Trent have you got any updates from Matt or Pete? I might have to give Pete a buzz now hahaha!

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/5/#findComment-4360194
Share on other sites

Im not certain, although it is in theory possible if you reconfigure the vacuum hose layout, and fit needed restrictors, although without a map sensor, i cant see there being accurate closed loop boost control, as different airflows make different boost with different Intake temps.

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/5/#findComment-4365299
Share on other sites

This might be slightly off-topic, but I'm curious if anyone knows how nistune compares to one of its rivals - bikirom. It seems to have additional options like boost control (with a solenoid addon) and generally seems like a pretty mature product.

How do nistune and bikirom compare generally, how do they compare for usability and tunability - are they tuned in the same way?

Right now i'm trying to toss up between these two options, and I can't find any real direct comparisons. Another frustration is it seems as though the major workshops are doing nistune remaps/tuning, but nobody specifically mentions bikirom, so I'm trying to get some ideas if someone who can do one can do the other ...

Any help / thoughts / ideas are appreciated :)

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/5/#findComment-4365699
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...