Jump to content
SAU Community

Recommended Posts

just read the entire thread, and this sounds like exactly what im after.

so can these chips be installed into an r34gtt ecu? do you nistune guys know of any tuners in tasmania who can tune your stuff?

how much for a chip fited to my ecu? ready to be tuned, or any other options?

cheers

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/10/#findComment-5071256
Share on other sites

Prices and details are on the website, I'm getting the website updated soon to quote people on everything...

R34 GTT - Type 4 board $260, installation $60, postage $15 + GST = $335

Call around Tassie and see who is willing to tune it since we dont have anyone listed there yet. I know a few people there have gotten tuned using their licence but no one has signed up as a workshop. Most workshops have signed up after using the system as we dont advertise in managzines etc its been mainly word of mouth... internet helps too!

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/10/#findComment-5071381
Share on other sites

just read the entire thread, and this sounds like exactly what im after.

so can these chips be installed into an r34gtt ecu? do you nistune guys know of any tuners in tasmania who can tune your stuff?

how much for a chip fited to my ecu? ready to be tuned, or any other options?

cheers

Contact SPG- Nick Summers pushes out some great tunes.

Also Mobile Mechanics- Martin is handling my install.

Both in Hobart/Moonah.

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/10/#findComment-5074431
Share on other sites

  • 3 weeks later...

hi mates,

i've got ecr 33 rb25det with auto transmisson

could you pls advise what ECU+nistune is suitable for my car?

i know z32 and r32 ECUs are ok but what kind (turbo, non turbo, Auto transmission or manual)?

also - how will i tune my car if i will install nistune? for example when i add some modifucations, as FMIC, what should i do with Nistune?

Edited by 427
Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/10/#findComment-5108936
Share on other sites

  • 1 month later...
hi mates,

i've got ecr 33 rb25det with auto transmisson

could you pls advise what ECU+nistune is suitable for my car?

i know z32 and r32 ECUs are ok but what kind (turbo, non turbo, Auto transmission or manual)?

also - how will i tune my car if i will install nistune? for example when i add some modifications, as FMIC, what should i do with Nistune?

I prefer to use the later Z32 ecu's but main concern is to get a turbo auto ecu as a manual one will give you shift inconsistency's.

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/10/#findComment-5153952
Share on other sites

Can a nistune tunner explain to me how the latency settings work? It shows the values in (us) ever time I look at it my head starts to spin.

nistune uses "us" or micro-seconds to measure injector latencies. as most injector latencies are given as milli-seconds you need to convert it. ms * 1000 = us

so an injector with a 0.7 ms latency, is inputted into nistune as 700 us. an injector with a 1.3 ms latency is inputted as 1300 us.

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/10/#findComment-5154242
Share on other sites

is there nistune software for a MAC computer?

software designed for mac, no. but, you can run nistune through a Windows VM with a program like Parallels, it runs fine this way. thats how i've been running nistune at the moment, until i get an old windows laptop i have up and running.

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/10/#findComment-5154283
Share on other sites

Has anyone tryed running blow through with the ford lightning maf meter?? And can nistune support injectors as big as 800cc's or so?

I have used blow through on a few cars (requires alot of work in the AFM voltage table) and 1000cc injectors on E85 without issues.

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/10/#findComment-5154794
Share on other sites

nistune uses "us" or micro-seconds to measure injector latencies. as most injector latencies are given as milli-seconds you need to convert it. ms * 1000 = us

so an injector with a 0.7 ms latency, is inputted into nistune as 700 us. an injector with a 1.3 ms latency is inputted as 1300 us.

Wow thanks that clears it up a lot for me.

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/10/#findComment-5155793
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...