Jump to content
SAU Community

Recommended Posts

Hello everyone,

I feel really stupid, but.. where is the oil filter ? and how I can access it ? I tried to look from underneath of my car (Stagea S2 if it matters) but plastic guard covers alot and car sits low so I was able to see much. Tried to put car on the ramps but again - she sits low and front bumper prevents her from going on the ramps. Can anyone point me to the right direction please ? :thumbsup:

PS Yes, I know, I know, fell stupid myself >_<))

Link to comment
https://www.sau.com.au/forums/topic/182777-silly-question-oil-filter/
Share on other sites

stupied.gif

LOL!

Drivers side of the engine block, about 2/3 of the way down. You WILL need to grow an extra elbow between the existing one and your wrist to remove it tho.

Haha! You probably seen it just didn't know exactly what you were looking for. I myself only recently did my own oil/oil filter change and I know it can be daunting especially when you don't have anyone to confirm what you're looking at.

It the cylindrical thing (usually blue) on the left side of the engine (if you're facing the engine bay) towards the bottom. You can access it from the top or bottom, I loosened mine from the bottom then took it out from the top. I'd recommend getting stands to jack you car on to if you're going to do a change yourself.

Hello everyone,

I feel really stupid, but.. where is the oil filter ? and how I can access it ? I tried to look from underneath of my car (Stagea S2 if it matters) but plastic guard covers alot and car sits low so I was able to see much. Tried to put car on the ramps but again - she sits low and front bumper prevents her from going on the ramps. Can anyone point me to the right direction please ? :pwned:

PS Yes, I know, I know, fell stupid myself :thumbsup: ))

Thank you for prompt replies, guys, I will look at it again, probably on Friday :pwned: I am not a mechanic but I've changed few oil filters in my life and done simple things with my cars before (probably most "complex" thing that I've ever done was changing a head on my Fal*on's engine but boy ! there are SO MUCH room there under the bonnet ! :thumbsup: ) What I am trying to say is that I know how oil filter (or, I'd better say, usually) looks like... :) - still, I was unable to find one (bashing my head against the wall)

JVP, there are different oil filter removal tools, I'got one.. well, it's sort of J-shaped. I will need fair amount of free space to use this toll. Or you are talking about something else ? Also, you mentioned extention, I've never used one before..

Any way, I'd give it a go again :)

JVP, there are different oil filter removal tools, I'got one.. well, it's sort of J-shaped. I will need fair amount of free space to use this toll. Or you are talking about something else ? Also, you mentioned extention, I've never used one before..

my mate who is a mechanic by trade, has these really good ones that are like a claw, and they adjust to size of the oil filter, and on top of the handle, they have a connector for a longer extension bar. it cost him a bit, but its well worth the money. my guessing at the brand is snap-on.

maybe the car has a remote located filter???? if there are some hoses and an aluminium plate with fittings in it on the side of the drivers side of the engine block (located directly above the main crossmember) have a look where the hoses go an follow them till you find the filter.

repco do an AWESOME one! its got a 3/8ths square drive in the center and a ratchet mechanism that makes the 3 arms close over the filter. well worth it ! they normally come with rubber covers over the

arms .. and you sometimes need to remove those to get more grip

cost me $20 or something

JVP, there are different oil filter removal tools, I'got one.. well, it's sort of J-shaped. I will need fair amount of free space to use this toll. Or you are talking about something else ? Also, you mentioned extention, I've never used one before..

Any way, I'd give it a go again :pwned:

keep going past the fuel filter and its there.. UNLESS.. you have an oil filter re-location kit!

its a fair way down towards the bottom of the engine bay and fairly difficult to see

Hm. Still unable to see "the cylindrical thing (usually blue) on the left side of the engine (if you're facing the engine bay) towards the bottom." :thumbsup::pwned:
keep going past the fuel filter and its there.. UNLESS.. you have an oil filter re-location kit!

its a fair way down towards the bottom of the engine bay and fairly difficult to see

Oh, ok. I'll try it on Friday (I hope). If I see nothing again then I'll put her on jack, remove the plastic sheild and have a proper look. "It's personal" :())) coz I feel really silly being unable to locate oil filter :D

you will piss it in ! get one of those tools.. a beer.. and follow down past the fuel filter and your in the right area.

mine had been put on by a rock ape.. and my whimpy IT hands couldnt budge it, but that repco tool saved the day.

you will piss it in ! get one of those tools.. a beer.. and follow down past the fuel filter and your in the right area.

mine had been put on by a rock ape.. and my whimpy IT hands couldnt budge it, but that repco tool saved the day.

I make my own beer so I have at least few dozens at home :D this is not an issue :() Repco tool - well, I'll try to undo that thing with my IT hands and, if I am not lucky, will jump on my workhorse and get the tool.

free beer? ! I'm in !

I make my own beer so I have at least few dozens at home :D this is not an issue :( ) Repco tool - well, I'll try to undo that thing with my IT hands and, if I am not lucky, will jump on my workhorse and get the tool.

heres a pic of it (its the big blue thing on the plenum side of the motor). this pic is with a 2wd sump on, but with the 4wd sump on its hard to see from underneath as it sits directly above the front diff housing and when u dump the filter off its gonna spew oil everywhere so sit some rags on the top of the diff housing to soak up the oil.

post-40430-1188378727_thumb.jpg

much easier to get at mine than one in a RS4 :(

Same here :D Should know cause had to do an oil change this arvo....oil filter tool I got has a handle which pivots side to side. Pretty sure I picked it up from Supercheap Auto sometime ago. It might help the RS4 owners get into those tight spots.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...