Jump to content
SAU Community

Recommended Posts

  • Replies 682
  • Created
  • Last Reply

Top Posters In This Topic

nice pic that Dave took with the front wheels off the deck on launch.

post6151250689717814548.jpg

nice pic paul - TWOOGLE must have so much more potential considering that your suspension isnt even setup.

what did it end up making awkw? im sure its somewhere in this thread but reading thru almost 30pages seems painful

Thanks Rob. Did a 1.38 the run before and blew the turbo outlet pipe off changing from 1st to 2nd...still ran 9.8

Mate it went 6.0 @ 114 to 1/2 track. What do you think it is capable of at that boost/power level?

Looking back I did 1.39 in the drag-r at 1740kg on ET streets so Meremere's not toooo bad off the line I suppose, its the rest of the roller coaster ride and the bumps and lack of top end grip thats the problem, Reece runs 3-4 10th quicker in Aussie easy, he told me I'd be shocked how much power you can use from 1/2 track compared with here.

On the aborted 9.7 run in the drag-r I had 5.something @ 117mph at 1/2 track and that car has gone on to run 9.4 @ 155mph on a pretty average air frield runway so you'd have to be talking 9.40-9.50 with 6.0 @ 114???

Rob

9.4 ??? on low boost?

9.4 on 29psi

turned it up 3 psi and blew the tyres off it (smoked all four right through 1st and part through 2nd) but still ran 9.7. Tyre pressures were a little high and the suspension needs tweaking before we can run more power. Its scary to think we have around 6-7 psi up our sleeve which equates to around 130hp at the tyres. Ive discussed a custom rear cradle with a supplier today with adjustable pick-up points which may be handy.

the 60' times on 29psi ranged from 1.39 all the way down to 1.36. Lots of fun :blink:

Edited by DiRTgarage

10/10 for the sig Paul your a talented boy arent you. I agree with Marko a little bit of smoke would ne nice. Or how about have 2 or 3 different sequences one staging the R doing a massive burnout etc etc you know what i mean.

Congrats Paul on another PB. I am sure that you will soon see the magic 8 pass :blink:

Mark ran 9.38 with the same set-up (turbo kit and box) with 100whp more using the clutch to shift gears. Changed to flatshifting and went to 9.0...so at least 1/10th saved on each shift as well as the added momentum gained with the increase in MPH.

The maths looks to be in my favour for a high 8...but theory doesn't always carry into practice easily.

Edited by DiRTgarage
Paul was good to meet you and was impressed when i saw you run the 9.4, pitty you broke out. did you manage to grab the next gear after all.

yes...was its pass with the car shifting properly, went into 4th like a hot knife into butter. I dont press anything other than the accelerator pedal when going through the traps...this back off when in front or pressing the brakes before the traps shits me. I should have given myself a little more headroom with the dial-in...i first decided to dial 9.47 a 1/10th quicker than my PB which was 9.57...but changed to 9.50. So it wouldn't have mattered either way. Next event ill have more of an idea and be able to bracket race it a bit better. Smashed him at the tree with a 0.02 reaction and the race was over at 1/2 track...he should have bought me a beer for letting him win.

Edited by DiRTgarage

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
×
×
  • Create New...