Jump to content
SAU Community

Recommended Posts

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

I think you'll find the story is that any parts on the car when it is shipped to Aus need to be destroyed before the car can be complied.

There is nothing in the import rules stopping you from modifying a car after you get it in Aus. This might be with parts that used to be on the car in jp.

If you were working in an industry that has just had a very deliberate crack down would you be sticking your neck out?

I can tell you this if you are unsure, ask your BROKER who is complying your car then ask who the workshop is and what will they do with the aftermarket parts and you want the answer in writing.

Or just deal with J-SPEC as Craig asked these questions a long time ago and has always told the truth and will show you the answer in writing.

Look guys read this simple as that dont believe anything unless it is writing.

14. Disposal of Non-Complying Parts

The workshop must have procedures and records to confirm that all non-complying parts removed from vehicles are either re-exported or destroyed. While the tyres on the imported vehicle still have to be replaced with new tyres, the tyres removed from the vehicle do not need to be destroyed. However, records need to be kept to show where the removed tyres have gone.

http://raws.dotars.gov.au/raws_online_guide.htm

Hmm. I e-mailed this to Geoff - he responded with:

We have spoken with the compliance workshops about this specifically and they have advised that despite being written into the RAWS guide there has been no confirmation of this from DOTARS themselves.  The workshops that are already operating are not destroying the parts, rather removing and replacing them with complying items.  If you would like to speak to one of them to feel safer, let me know and I'll supply contact details.

The car sits at the workshop until they gain their RAWS and if they dont get it the car is re-exported or destroyyed.

I know of people holding cars since January waiting to finish their RAWS.

I would be hesitant to let some people use my car as a test vehicle it would have to be somebody you had a lot of trust in.

  • 2 weeks later...

How would someone prove or disprove that parts were destroyed. Is the method for part destruction outlined somewhere?

All the workshop would have to do is keep a log book of parts removed and destroyed, and they are in the clear.

They can say the parts were crushed for scrap metal when really the parts were just given back to the original owner with no receipt or record.

This whole parts fiasco seems very stupid and pointless to me anyway. If the car is road worthy with the aftermarket parts on then what is the problem?

Originally posted by J-Spec Imports

EXACTLY - it is not going to be a cheap process, even with cheap original parts in Japan .. you will need to have "friend" over there that can do all of the running around for you..

Might I be of assistance?:P

I would destroy the parts, take photos of the parts and keep on hand a reciept from the scrap metal yard.

Or just dont bring in the cars with all the modified parts to make life easy.

I can tell you this if or when I have a RAWS I wouldnt bring in the car for somebody who says throw away $50,000 and your only income so some snot nose kid can save a couple of grand on a unroadworthy car that dosent pass ADR's.

It is as plane and simple as that, so I dont know why people are still complaining on this forum, like it will make a diference in DOTRS eyes.

Why not help people through the new rules not complain about them.

Driver, a modified car cannot be imported and complied under the new scheme.

The complier needs to provide proof the parts were destroyed.

The owner of the car would be responsible for the cost of replacing the parts. If you have bought via a broker, *you* are the owner.

Modified cars *can* be bought in if they are:

1) Older than 15 years old

2) Are a personal import that you have owned for more than 12 months overseas

3) For race or rally use only.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...