Jump to content
SAU Community

Recommended Posts

Hey can anyone tell me how the JJR Split S/S dump pipes stack up against the lickes of the apexi gt spec single pipe....? im considering buying one but my mechanic keeps trying to convince me to buy this pipe made by a queensland mob called CS i think but it works out to be like 700 bux for the pipe including ceramic coating. Im just thinking what kind of advatage will the 700 pipe have over the 250 pipe and what kind of power difference would the result be. generally what kind of power increase would a dump pipe make to a car with a catback and nothing else?

Link to comment
https://www.sau.com.au/forums/topic/184590-dump-pipes/
Share on other sites

well thats what i thought and im not after a track car i just want a quick street car so what im getting at would be is the extra 450 you spend on the ces pipe going to give you like 10kw extra or would it just be like 5 if that

Link to comment
https://www.sau.com.au/forums/topic/184590-dump-pipes/#findComment-3341254
Share on other sites

keep the standard dump pipe and get a EBC , it will get u a bigger power gain

Running higher boost through a factory restrictive dump pipe on an R33 GTS-T is not the greatest idea.

Bo0oSt has said the only mod his car has is a cat back system, so the best mod he can do right now is to complete the exhaust so he has a nice flowing full turbo back system, then think about upgrading his intercooler and raising the boost later on.

Link to comment
https://www.sau.com.au/forums/topic/184590-dump-pipes/#findComment-3341316
Share on other sites

what kind of power gain would a dump give you anyway? isn't the stock pipe restrictive so wouldnt a large pipe allow more flow? That pipe from Bos importing why would that better than the JJR it looks pretty much the same would it just be the build quality ?

Link to comment
https://www.sau.com.au/forums/topic/184590-dump-pipes/#findComment-3341327
Share on other sites

Running higher boost through a factory restrictive dump pipe on an R33 GTS-T is not the greatest idea.

Bo0oSt has said the only mod his car has is a cat back system, so the best mod he can do right now is to complete the exhaust so he has a nice flowing full turbo back system, then think about upgrading his intercooler and raising the boost later on.

yeh thats what i was thinking...finish the system then get a better panel filter and a fmic but even with the fmic the jjr or cooling pro kits are only like 350 when the hybrid kits are 600ish is that only because they have the hybrid stamp ? lol

Link to comment
https://www.sau.com.au/forums/topic/184590-dump-pipes/#findComment-3341340
Share on other sites

the main reason im going with bos dump/front is the design.

The split is coming back in after the bend, which i think is a better.

The split coming on at the bend could create turbulance and upset the flow of exhaust gasses rather than making for smooth flow.

Link to comment
https://www.sau.com.au/forums/topic/184590-dump-pipes/#findComment-3341398
Share on other sites

i got the flyn bellmouth front dump in 1. mate has jjr. we dynoed my car with the only difference being the dumos and found the flyn 1 to be 1-2kw better than the split. i was makin 178-180kw. my mates car did the same only he made 266 with jjr and 272 with flyn.

results speak loud and clear. in the top end of the power band, a dump front in 1 will give u better power figures.

Link to comment
https://www.sau.com.au/forums/topic/184590-dump-pipes/#findComment-3341437
Share on other sites

ok so the common consensus would be for me to buy which the jjr split or something like an apexi gt spec single front pipe...budget is around 400 and the ces would be a waste as its not some 300rwkw tracky

Edited by Bo0oSt
Link to comment
https://www.sau.com.au/forums/topic/184590-dump-pipes/#findComment-3341616
Share on other sites

Hi guys. Sorry for the nube question!

Im at the stage where I want up the performance of my 33.

Currently have a 3" turbo back exhust. And EVENTUALLY in within 6 months, I'd like to have a bigger turbo for "a quick street car".

When would getting the dump pipes installed be beneficial/recommended?

Link to comment
https://www.sau.com.au/forums/topic/184590-dump-pipes/#findComment-3342307
Share on other sites

I'm in the same boat here. I have a stockish R33, with cat back exhaust and pod filter. I recently added a man. boost controller. I also want a quick street car, for the odd track day too, but i'll be adding a FMIC and dump soon. I'm probably goin for the JJR ($260) dump and FMIC ($350), both from Just Jap. They're cheap and can do well up to around 300rwkW (i'm advised).

I'd be stoked for a setup where it's economical around town, then i flick a few Power FC switches and i'm peaking 220rwkW. I think that's affordable and reasonable for a daily driver that you want to have fun with :)

Link to comment
https://www.sau.com.au/forums/topic/184590-dump-pipes/#findComment-3342410
Share on other sites

the main reason im going with bos dump/front is the design.

The split is coming back in after the bend, which i think is a better.

The split coming on at the bend could create turbulance and upset the flow of exhaust gasses rather than making for smooth flow.

no offence, but I have been there and done that, and the split design is a load of shit. It will perform the same as a whole pipe. Just looks fancier.

The exhaust comes out in pulses, it doesn't "flow".

So there is no way you can upset the "flow" of gases, as its already upset when it leaves the engine!

Link to comment
https://www.sau.com.au/forums/topic/184590-dump-pipes/#findComment-3342861
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...