Jump to content
SAU Community

Wolf In R34

SCR34M3R

By SCR34M3R,
in Engines & Forced Induction

 Share

Recommended Posts

SCR34M3R Rising Star

SCR34M3R

Posted
Posted

hey guys

just wondering if any one has a wolf 3d in there 34, does it still run everything? i know they arnt plug n play, how hard is it to wire up?

or any other info on ecu;s would be great, want a ecu with no afm.

Cheers

Justin

Link to comment
https://www.sau.com.au/forums/topic/185149-wolf-in-r34/
Share on other sites
abu Grand Master

abu

Posted
Posted (edited)

Microtech also uses no AFM if you are looking for an alternative to a WOLF3d.

Not sure who is using it in an R34, but seen a few using it in R33s.

Seem to make good power. I have a PLUG & PLAY one for sale, which plugs into RB20/25, but not sure if R34 RB25 is the same?

Have a read through the link below, you will see who is running a Wolf and what sort of power they are making.

http://www.skylinesaustralia.com/forums/in...showtopic=55845

From what I have read about WOLF universal units, they are not that complex to wire up. I am pretty sure you could get it installed and tuned for about $600?

Depends how good/confident you are with cutting ECU wires, you could probably get a wiring diagram and do it your self.

It is a standalone ECU and will run everything as your standard ECU does, besides AFM, obviously.

Edited by abu
Link to comment
https://www.sau.com.au/forums/topic/185149-wolf-in-r34/#findComment-3351197
Share on other sites
abu Grand Master

abu

Posted
Posted (edited)

I am pretty sure on the website as well you can get a wiring diagram. I know I have an installation manual with my one which shows you how to wire it up to different cars.

Hope some of that helps a little.

Abu

Edited by abu
Link to comment
https://www.sau.com.au/forums/topic/185149-wolf-in-r34/#findComment-3351206
Share on other sites
SCR34M3R Rising Star

SCR34M3R

Posted
  • Author
Posted
Microtech also uses no AFM if you are looking for an alternative to a WOLF3d.

Not sure who is using it in an R34, but seen a few using it in R33s.

Seem to make good power. I have a PLUG & PLAY one for sale, which plugs into RB20/25, but not sure if R34 RB25 is the same?

Have a read through the link below, you will see who is running a Wolf and what sort of power they are making.

http://www.skylinesaustralia.com/forums/in...showtopic=55845

From what I have read about WOLF universal units, they are not that complex to wire up. I am pretty sure you could get it installed and tuned for about $600?

Depends how good/confident you are with cutting ECU wires, you could probably get a wiring diagram and do it your self.

It is a standalone ECU and will run everything as your standard ECU does, besides AFM, obviously.

yer i seen a few R33 with wolf and microtech, but havnt seen ne R34 GTT's.

on there site it only says R32, R33 GTST and R32, R33, R34 GTR nothing about R34 GTT.

i like the wolf cos u also get the boost controller built in(if i read corrently).

cheers for ya guys info

Link to comment
https://www.sau.com.au/forums/topic/185149-wolf-in-r34/#findComment-3351284
Share on other sites
infamous_t Veteran

infamous_t

Posted
Posted

Hi Justin,

Give Top Racing a call (08) 9472 3368, I'm sure they've already crossed this path a few times, being a premium Wolf dealer in WA.

I think the plug & play WOLF for the R33 can be used, but the base tune is not great due to the higher compression in the R34 RB25DET.

Link to comment
https://www.sau.com.au/forums/topic/185149-wolf-in-r34/#findComment-3352322
Share on other sites
  • 3 weeks later...
Raysboostin Mentor

Raysboostin

Posted
Posted
There is no Plug and Play for their new one, the V500, yet. If there was, I reckon I'd give it a whirl, because they look like they've got some ripper features.

the V500 uses a patch loom. it converts ur r34 plug to its own wolf plug. so u just order the correct program and patch loom and off u go. very handy if u plan to upgrade in the future, EG. should u sell ur r33 to get a r34 all u need to is put plug the stock 1 back in and order a new patch loom and a reprogram and ur off again. that way u dont have to buy another ecu to suit different plugs. cant wait to get one

Link to comment
https://www.sau.com.au/forums/topic/185149-wolf-in-r34/#findComment-3391311
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • EndZee
      R33 Gts/-t Abs Module Wiring Schematic (not Gt-r)

      By EndZee · Posted

      Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...