Jump to content
SAU Community

Recommended Posts

series 2 r32 (1991-1993) is heavier due to the side intrusion bars from factory. Which makes it P-Plate legal over the 1989-1990 model.

Although, when i was pulled over by the police, their system showed my r32 as 1250kg unladen mass. Going by my given estimate of 157kw factory, their on the spot calculation determined my car as over the p/w law (125kw)

They told me due to the 1kw over the limit they will let it slide but if i had an accident they would charge me for high-powered vehicle and insurance will be void.

I bet the system uses the same weight for all models of r32's making mine illegal, when its not.

Next time ill just tell them its 155kw from factory and everything will be fine :thumbsup:

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

I didnt read the whole thread, but reading the first post, wheres the confusion? Isn't the law pretty clear now? :thumbsup: ie. he can't drive the 34gt-t no matter when his license was issued.

Having said that, any P-platers get done for overpowered vehicle lately? Any news of teh massive fines (1k)?

Edited by Yawn
I didnt read the whole thread, but reading the first post, wheres the confusion? Isn't the law pretty clear now? :dry: ie. he can't drive the 34gt-t no matter when his license was issued.

Having said that, any P-platers get done for overpowered vehicle lately? Any news of teh massive fines (1k)?

first offense is $220 fine and 3 points for driving a high powered car under these new laws. I know someone who got caught.

this will answer all your questions!

if your car doenst pass this then you cant drive the car no matter when you got your licence b4 or after july 1 07!

http://webapps.vicroads.vic.gov.au/vrne/vr...pwcalc?OpenForm

this is what it tells you when its over

The power to weight ratio exceeds 125 kw per tonne. By law P Plate drivers are unable to drive vehicles that exceed 125 kw per tonne.

and with the 32, yes some pass, but most people mod them so it throws them over the limit! and anway cops will still pull you over in a 32 just to see if you do have the mods and slap a canery on you!

and with the ugly law only 1 air mod is aloud they will get you 110%!

i got a canry and a EPA sticker one after the other, def for to many air mods, and i had to choose between my cooler or my pod, and BOV was just not aloud, and EPA, well my 4' HKS exhaust had to go! it was so far over the limit i had to put the stock one back on coz even putting the silencer back in did nothing..

the laws SUCK we cant do anything to these cars any more!

Edited by ALLURE GIRLS

But the EPA and defects have always been there, and always will be part of owning a modified import, so i guess we can't complain.

Its just the loss of points for driving an overpowered vehicle that shits me (and most others) the most, still 9 months to go till im on my fulls :action-smiley-069:

Edited by Yawn

doesnt really matter what you've done to it.. they dont have a mobile dyno so they cant prove you've upped the power in your car. ive been pulled on different occasions and twice ive been fine but once the cop said i was over the power to weight.. i just showed him the vicroads printout of the cars your allowed and a printout from the nissan manual of how heavy my car is (r32). Long story short he let me go.. but 3 weeks later i copped a epa letter haha :s

i tried to show the cop the weight of the car in my nissan manual but it wasnt in there.

Made my self look like a fool and didnt strengthen my argument (probably thought i found it but lied it wasnt in there) :S

What does your Nissan Manual state the weight of the car to be?

Police said that it needs to be unladen mass and NOT the kerb weight.

I drive nothing but high powered 'illegal' cars and have yet to have a problem with the cops in Melbourne.

I have a GTR r32 for daily use and never get any problems and even in my r33 gtst that stands out like dogs balls.

I'm constantly driving imports to go get complied with no number plates and still get away with it.

And i'm only on my 2nd yr of P's.

I'm sure my day will come. :D

I guess its the luck of the draw, or how you talk to the officer or something?.

Stagea for now is solving all my problems :D

vicroads state that if a vehicle is significantly modifed from standard then new power/weight figures are needed... i was going to engineer my old project datsun 1600 with heavy parts and a stock SR to make it P's legal, then strip it for track days... I never followed through though as i wanted a nicer daily.

doesnt really matter what you've done to it.. they dont have a mobile dyno so they cant prove you've upped the power in your car. ive been pulled on different occasions and twice ive been fine but once the cop said i was over the power to weight.. i just showed him the vicroads printout of the cars your allowed and a printout from the nissan manual of how heavy my car is (r32). Long story short he let me go.. but 3 weeks later i copped a epa letter haha :s

It'll be interesting when someone comes across a officer who is a bit more informed i reckon

From this date a probationary licence holder will not be able to drive a vehicle if it has:

* An engine of eight or more cylinders;

* a turbocharged or supercharged engine (except diesel powered vehicles);

* an engine that has been modified to increase its performance; and/or

Because all they have to do is notice an exhaust, or similar... as that's a modification to increase power.

Then people will be in all sorts of strife. As you can have all the printouts in the world, wont save you unfortunately.

Its just going to require one person to be pinned in that manner, then it will be a free for all by the Police once they have a victory

Vicroads make all sorts of mistakes, there is way to much ambiguity in the company, I want to get my lincense back after losing it for six months and was told over the phone that i could have it back, then when i went into the office to get it, I was told that i still had to serve more time..... then after a few hours and a few phone calls, they ended up issuing me a full lincence (blue strip) all in the same day...

true nismoid but how can they actually prove that? you have an exhaust yeh but how can they prove it gives more power?

Well it would probably come down to them saying that it does, and you proving that it does not.

Seems to be the way the law system works here in my expiriences.

And lets face it, it does :D

So kinda arguing the point would only dig yourself a hole in a way.

Probably too caught up in the purchase of the car, blinded by turbo powahh :(

And they probably couldnt really be bothered, just checking for the sake of knowledge, seeing that there are so many P plate high powered cars going around.

i tried to show the cop the weight of the car in my nissan manual but it wasnt in there.

Made my self look like a fool and didnt strengthen my argument (probably thought i found it but lied it wasnt in there) :S

What does your Nissan Manual state the weight of the car to be?

Police said that it needs to be unladen mass and NOT the kerb weight.

i went to a public weigh bridge and had my car weighed; 1380kg.

before i had any mods to show increased power, i kept the printout in my glovebox but the cops don't want a bar of it.

even though at the time it was technically "underpowered" to the power to weight law, they couldn't care less.

i even went and spoke to several police at their stations. they all said something along the lines of there being some place which keeps all the technical data of all cars, and because the 1 car they used the data from was overpowered, it overrules all the same model.

this countries laws suck!

with me i bought a N/a but ive done extractors and exhaust too it (and pod).. even though its "* an engine that has been modified to increase its performance; and/or" i think they would let me go as its not like i have a turbo i could just say i bought the car with it.. doubt they would even notice the extractors anyway could just say there stock.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...