Jump to content
SAU Community

Recommended Posts

I would agree that is where the boost stabilizes to but I still claim to see 14psi on the initial application of throttle. I may have to go to the dyno to prove this.

So the ARX does have more boost than the RS-RX...... LOL.

or you have a leak in one of your hoses (thus bleeding off too much pressure) ?

I've not yet looked into how the M35 controls boost but I assume its similar to previous nissans where the wastegate opens at x psi and the hose that connects to it is plugged straight into the intake etc.

On the s1 and s2, the wastegate would open at 5psi and where more boost was needed, they just had a second hose coming off the first one and a solenoid would open/close this second hose. When open it would bleed ~2 psi off - so the wastegate then reads 2psi lower than the overall boost pressure, effectively raising overall boost by 2psi.

If you had a leak in this hose or anywhere on the connections, there would be less pressure and the wastegate would stay closed longer (thus the higher boost). There is no fancy electronic boost control on these cars. I believe the ECU uses a boost sensor to tell it what the boost pressure is, but it has no way of controlling it.

Just a thought, although its entirely possible the ARX runs more boost as standard.

M35 has a boost solenoid, as per almost every other turbo nissan made. its perfect for cutting boost incase of detonation. anyway, its not in series, its probably setup the same way as the C34. it bleeds off air to the wastegate actuator but its preset and youre right, it cant 'see' the boost its at, its a factory programmed setting.

his vacuum pipes looked fine when i had my head up the ass end of his motor a few weeks back

M35 has a boost solenoid, as per almost every other turbo nissan made. its perfect for cutting boost incase of detonation. anyway, its not in series, its probably setup the same way as the C34. it bleeds off air to the wastegate actuator but its preset and youre right, it cant 'see' the boost its at, its a factory programmed setting.

his vacuum pipes looked fine when i had my head up the ass end of his motor a few weeks back

:P

:D

Edited by iamhe77
I would agree that is where the boost stabilizes to but I still claim to see 14psi on the initial application of throttle. I may have to go to the dyno to prove this.

So the ARX does have more boost than the RS-RX...... LOL.

When I got mine back after getting my coilpacks replaced the job sheet said 14psi.

Some great news!!!

I made contact with a Russian company today that has done the conversion of the navigation system for the M35 & V35 from Japanese screens to Russian through an update to the firmware. They believe they could do the same for an english version but would require 20 - 30 units to convert to justify the investment.

The upside is that they are charging about $100 (not sure if this is US or Aust) in Russia to do the conversion.

We just need to work out if someone in Aust could do the install or if the units need to be sent to Russia. Lets think down the local avenue, who would know how to the install? Is this a Chris Rogers job?

I see light at the end of the tunnel.......... :P

Hi im a new member of SAU & a proud new owner of a 2001 Nissan Stagea ARX-4. Ive been reading SAU's Forums for months trying to find info on weather a Stagea would be a good buy. Well money well spent ,broke the car in buy doing a sydney to berry run, what a car

And also been studing the forums about the xanavi system that are built in these cars

Well put me in for a conversion, i'll be happy to join in to get the conversion happening.

:D

for those interested I can get ENGLISH buttons...

Hi chris i just bought myself a Nissan 2001 Stagea ARX-4

I know that the car comes with a Xanavi DVD Based Jap Sat, it also has the built in DTV, with the bose system

Id would love to get the whole system converted & Buy the replacble buttons too. Im in sydney but im planning to go to townsville barracks to see mates there. and pop in have a chat, Ive heard your a great supporter for stagea's and do audio work.

do you have a website i could browse, or how much for the replacement buttons

I would love to get my hands on that disc, does it convert the menu to english, i want it please replay if it does

Please if anyone has the software to convert M35 menu from Japanese to English, then i can buy the buttons from chris

Please Please Please Im a NooB oWneR of a Proud Stagea 2001

Please if anyone has the software to convert M35 menu from Japanese to English, then i can buy the buttons from chris

Please Please Please Im a NooB oWneR of a Proud Stagea 2001

the conversion should be ready around the 10th December.

I did the first conversion to my own car yesterday and all looks good. I will be checking all the pages and functions over the next 3 weeks and then we should be ready to offer this product to any one interested.

Keep an eye on this thread. http://www.skylinesaustralia.com/forums/So...html&st=520

Cheers

Andy

the conversion should be ready around the 10th December.

I did the first conversion to my own car yesterday and all looks good. I will be checking all the pages and functions over the next 3 weeks and then we should be ready to offer this product to any one interested.

Keep an eye on this thread. http://www.skylinesaustralia.com/forums/So...html&st=520

Cheers

Andy

Thanks Andy i'll keep waiting & i'll keep and eye on that thread

thanks

Bryan

Hi chris i just bought myself a Nissan 2001 Stagea ARX-4

I know that the car comes with a Xanavi DVD Based Jap Sat, it also has the built in DTV, with the bose system

Id would love to get the whole system converted & Buy the replacble buttons too. Im in sydney but im planning to go to townsville barracks to see mates there. and pop in have a chat, Ive heard your a great supporter for stagea's and do audio work.

do you have a website i could browse, or how much for the replacement buttons

:P Found your site

yep but things like buttons are not on there. they vary in price though. last set I bought were in the 4-500 region.

Thats fine chris, im still interested . PM me if you have a quote for a nissan 2001 satgea with TV, im heading to queensland with my wife around december, i'll let you know

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...