Jump to content
SAU Community

Recommended Posts

as iain said.

its not easy to access either, my assumption the whole side wall needs to come out unless you have spiders legs for fingers...

what were you trying to do??

Well my 4WD light is on and I have done the MIL light diagnostic and got 0000 so I thought I would move on to the Altessa computer as it directly controls the 4WD. Some of the C34 guys spoke about a diagnostic program for the altessa that works for them, not sure if there is one for the M35. Also want to check that everything is wired up properly.

Mike.

fair enough..

The Attessa ecu in the C34 is easier to get to than ours.. from memory.

Be prepared to pull off the whole inner wall in the boot to access it.

If you take the drivers side "compartment" out (just a couple of clips, it pulls right out) you can just barely see the Attessa comp sitting there. what i notices is that the plug is on the bottom side, and i think i could only see one of the bolts holding the ecu..

theres a couple of plugs directly below it under the car if you take the vented tray off, maybe check those wires too.

So I don't think there are any M35's in Tassie, certainly none for sale. So last night I test drove a 97' Stagea. It was probably the most under-whelming experience driving a car I've ever had. What is with the extremely loud fan sound from 0-50? I booted it a couple of times and it felt like I was going 200k's an hour yet I was slowly creeping past 20, on my way to 50 which took about 4 hours. I wasn't expecting GTR performance but this thing performed like a VAN and that is no exaggeration. There was also a loud high pitch 'pulley or belt sound in the upper rev range. It was actually a frightening experience cause every time I accelerated it felt like I'd blown the car up. I remember driving my old man's EL Falcon wagon and that was far and away superior to this thing. It felt draconian.

TELL ME IT WAS JUST A BAD EGG OR TELL ME IT WASN'T BUT THE M35'S IS FAR SUPERIOR.

So I don't think there are any M35's in Tassie, certainly none for sale. So last night I test drove a 97' Stagea. It was probably the most under-whelming experience driving a car I've ever had. What is with the extremely loud fan sound from 0-50? I booted it a couple of times and it felt like I was going 200k's an hour yet I was slowly creeping past 20, on my way to 50 which took about 4 hours. I wasn't expecting GTR performance but this thing performed like a VAN and that is no exaggeration. There was also a loud high pitch 'pulley or belt sound in the upper rev range. It was actually a frightening experience cause every time I accelerated it felt like I'd blown the car up. I remember driving my old man's EL Falcon wagon and that was far and away superior to this thing. It felt draconian.

TELL ME IT WAS JUST A BAD EGG OR TELL ME IT WASN'T BUT THE M35'S IS FAR SUPERIOR.

Strange. C34's usually go pretty good for a wagon. The one you drove must be in bad need of a service etc.

Of course M35's kick arse and chew bubble gum. (and I'm all out of gum)

IMHO the M35 is a comfortable cruiser, but can go pretty hard if you push the loud pedal. It's quiet and has a fair bit of room.

Much the same as the C34!

So I don't think there are any M35's in Tassie, certainly none for sale. So last night I test drove a 97' Stagea. It was probably the most under-whelming experience driving a car I've ever had. What is with the extremely loud fan sound from 0-50? I booted it a couple of times and it felt like I was going 200k's an hour yet I was slowly creeping past 20, on my way to 50 which took about 4 hours. I wasn't expecting GTR performance but this thing performed like a VAN and that is no exaggeration. There was also a loud high pitch 'pulley or belt sound in the upper rev range. It was actually a frightening experience cause every time I accelerated it felt like I'd blown the car up. I remember driving my old man's EL Falcon wagon and that was far and away superior to this thing. It felt draconian.

TELL ME IT WAS JUST A BAD EGG OR TELL ME IT WASN'T BUT THE M35'S IS FAR SUPERIOR.

I had the same experience as you with the C34....must have been a bad egg as well........I have driven an 260 and found it pretty good....but no GTR!.....M35's are completely different to drive....much more of a cruiser.

So I don't think there are any M35's in Tassie, certainly none for sale. So last night I test drove a 97' Stagea. It was probably the most under-whelming experience driving a car I've ever had. What is with the extremely loud fan sound from 0-50? I booted it a couple of times and it felt like I was going 200k's an hour yet I was slowly creeping past 20, on my way to 50 which took about 4 hours. I wasn't expecting GTR performance but this thing performed like a VAN and that is no exaggeration. There was also a loud high pitch 'pulley or belt sound in the upper rev range. It was actually a frightening experience cause every time I accelerated it felt like I'd blown the car up. I remember driving my old man's EL Falcon wagon and that was far and away superior to this thing. It felt draconian.

TELL ME IT WAS JUST A BAD EGG OR TELL ME IT WASN'T BUT THE M35'S IS FAR SUPERIOR.

I'd say it was a bad egg if it was making those kind of noises...

... having said that, I drove a number of Series 2 C34's prior to buying my M35 and was completely underwhelmed with them also (as was the wife!).

Never drove a Series 1 C34, but considering lower power/torque figures and 1 less gear I don't think I needed to.

Love my M35. They are indeed far superior.... I just wish they could tow like a C34 can :(

yeh agreed. i fkn hate my car right now. but still prefer it to the C34.. driven a few when i was looking for the m35 and just wasnt impressed. drove the m35 and i felt a whole heap stronger.

Did you have a drive of a 260?....only reason I didn't buy one was that it was a 2000 model....to old for me :P

yeh i drove a 260. actually liked them and the only reason i didnt get one was because of the P plates at the time..

m35 is much more soothing to a police officers eye.. accept for the cunt that shoved a stick up the exhaust 4 days ago..

Ah ok, I just checked, I didn't realise the series 1 only had 170kw. Not a lot of power for a big car. Makes a bit more sense now. Still, it was an abysmal experience. I'm test driving a manual legnum next week with the AYC. See how that goes.

If that doesn't impress me then I'll be in search of a M35 on the mainland. From the advice I've got on here, something with upgraded suspension would be nice. I might be waiting a while, I want an M35 with all black interior (inc black heated/adjustable leather seats) & the VDO in very good condition however i'm not willing to pay over $14500. I've seen a couple go for this price, so it's just a matter of being patient.

Just a pain in the ass I can't test drive one down here before I fly over.

Nah I've seen a few go with those options for that price. Australia isn't in great shape atm, houses are on the market for twice as long as what they were 4 months ago, the reserve bank hasn't put interest rates up for some time because consumer spending is poor. Furthermore, they're coming up to a decade old now. You can get a 2001 Audi Allroad twin turbo V6 for around 16-18 which were 100k priced new.

When all said and done, al ot of people selling cars all start off 25-30% more than what they eventually get and this site is a perfect example of it. Not until they go below 16 are they selling, yet they all start between & 18-20, then it's "bump down to 17500" 1 month later "bump down to 16000" then another couple of weeks "bump down 14000" et etc.

In this market, the buyer is king.

I'm a perfect example of douche trying to get what he thinks his car is worth. I initially advertised my car so that it was equally the best buy on carsales which was 14k. Had I just advertised it for 12500 (well below market) I would have sold it 6 months ago but now i'll probably get even less than that

IMO 14500 evaluation is quite generous.

Yeah, sorry mate; I'm with zei20l on this one.yes.gif

Excellent condition all round, and Cheap are mutually exclusive concepts.

The guys in this forum are a great resource, and are helpful to a fault; it would pay you to take it on board.

The M35 is not a car you want to skimp on price. It will bite you on the arse, HARD.

Re; Allroad; you do not even want to know what they cost to repair and buy parts for...

Edited by Daleo

so buy an audi lol

and if you re-read my post, i said you wont find anything in the condition you describe for that price. youll get something with over 100k on the clock for under 14k

Lol I don't want to spend that much on a car (as I said I want to spend no more than 14500). I'm going to purchase a couple investment properties in 8-12 months ... if I did want to spend 17-18, yeah i'd be all over an an Audi Allroad.

You raise an interesting point re condition and kilometres. K;s have always been 'a big ticket item' for me but they seem less important when importing a car due to the increased risk that the K's have been wound back. I gotta say, you're pretty much the scum of the earth if you wind back the k's on a car, right down their with peod's and the like.

From people have said on here, it's better to get a car that's in good condition with higher k's than a car in average condition with lower k's

Re: Condition - yeah I'm arguing I can get all the options and vg condition for less than 15.

Only one way to find out thumbsup.gif

well, post up when you get one :)

you generally pay a little more for a better coonditioned car. and i rekon if youre not buying one FOB then it will have over 100k on the clock. not that its a bad thing, people have over 200k on the original motor and its still going fine

The M35 is not a car you want to skimp on price. It will bite you on the arse, HARD.

Re; Allroad; you do not even want to know what they cost to repair and buy parts for...

agreed x 1000

he already owns an alfa, he knows how much servicing on a euro costs.

Yeah, sorry mate; I'm with zei20l on this one.yes.gif

Excellent condition all round, and Cheap are mutually exclusive concepts.

The guys in this forum are a great resource, and are helpful to a fault; it would pay you to take it on board.

The M35 is not a car you want to skimp on price. It will bite you on the arse, HARD.

Re; Allroad; you do not even want to know what they cost to repair and buy parts for...

Fair point

Re: Getting bitten on the arse: Any car I buy will be tested by a certified inspector AND taken to a panel beaters for an inspection on whether it's been in an accident. I do that both with private and car-yard sales.

If I do that and still get bitten on the arse well so be it, not much else I can really do eh

I honestly think it's a matter of patience and I don' think that premise is any different for any car you buy.

As for parts, i've owned a couple of Alfa's in my time, nothing would shock me lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...