Jump to content
SAU Community

Recommended Posts

It get's blocked up.

I've been lead to believe that if you clean it out, use good oil and service it regularly you should be fine.

To be safe, if you're running a standard turbo you can drill it out to 2mm, and if you're running a highflow you drill it to 3mm.

Scotty and Aaron are the experts, but that's what I've been lead to believe.

Any peeps on here interested in a wood trim interior for an M35? I only ask as I'm going to paint it all black unless someone wants to trade...

:)

You can vinyl wrap the timber part of your dash and it looks pretty good.

I would just drill it out to 1.5 mm if you plan to keep the stock turbo, 2.5 mm if hou go for a bushed core.

The banjo threads into the block just in front of the passenger front drive shaft.

It get's blocked up.

I've been lead to believe that if you clean it out, use good oil and service it regularly you should be fine.

To be safe, if you're running a standard turbo you can drill it out to 2mm, and if you're running a highflow you drill it to 3mm.

Scotty and Aaron are the experts, but that's what I've been lead to believe.

Great info, thanks guys. Might drill it out when I go to see my old man in a few weeks since he has a drill press. I don't even have a vice at the moment!

I don't suppose some one on here knows if the centre console on an M35 is interchangeable with the V unit? Chasing both the radio surround and lower gear stick surround. Figured if they are interchangeable it would make finding these parts a million times easier. :)

I don't suppose some one on here knows if the centre console on an M35 is interchangeable with the V unit? Chasing both the radio surround and lower gear stick surround. Figured if they are interchangeable it would make finding these parts a million times easier. :)

yes, they are both inter changable.

I saw one for sale on the V series forum

Well I've set mine to 360mm front and rear, this gives about 15mm gap between tyre and guard with my 245/45-18 tyres. I might drop it another 5mm but probably not worth the trouble. I like to leave 10mm gap so it doesn't get too many looks. With the aero front bar it just clears those cement stops in car parks. Its funny, when I look on the RAWS site and look up my car it shows the stock height (i think its listed wrong) and minimum height. It states unladen F and R 365mm and Minimum F and R 346mm. I had it at 345mm at one stage and its bloody low so I think the figures are wrong.

Edited by slippylotion

Rear under spoiler for the left and right muffler system

I haven't seen any mention of this here before therefore I am just shariing in case someone want to take this path...

http://global.rakuten.com/en/store/zeesis/item/m35-supoir/

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Is it alright to top up with just another green coolant?
    • thanks GTSboy. My confusion at the moment is i am trying to locate the ignition, ECU battery power and the ECU negative The closest thing i can find is the for the S15 on Page 8 of the Wiring Specialties web page https://drive.google.com/file/d/0B9F33_M_GgENQnZ6STMxVmVNd1E/view?resourcekey=0-eZ4nNRwRoqa1qvKlWWHm8A I cannot find the same diagram for the R33 RB25DET Series 2 dash plug pin out.... Do you know what the Pins? or know where i can find the same pinout diagram for the RB dash plug? Thanks for the advice on the box... i like a 6 speed so might be on the lookout or the box now.. a topic of discussion for another post...
    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
×
×
  • Create New...