Jump to content
SAU Community

Recommended Posts

MEH!

My CD player won't eject a CD and i'm getting 'CD Err F0.' I reckon it's just cheaper to sort out a connection to my ipod. Is there an AUX at the back of the player or do I need to buy an adaptor, similar to the V35's.

Oh and I didn't realise VE SS did the 100 in only 5.5secs, dayyamm

There are heaps of threads about "fixing" the CD error, have a search in here or in the V35 section.

For an iPod connection to the OEM head unit, the USA Spec PA15-NIS is what you'd be after for simple plug and play (although you will need to get behind the headunit)

http://usaspec.com/product.php?ProductID=30&forceShowProduct=1

There are heaps of threads about "fixing" the CD error, have a search in here or in the V35 section.

For an iPod connection to the OEM head unit, the USA Spec PA15-NIS is what you'd be after for simple plug and play (although you will need to get behind the headunit)

http://usaspec.com/p...ceShowProduct=1

I use that same USA Spec set up. Awesome sound quality and VERY easy to fit and set up. Cost was under $150 delivered from the US. It also has a spare audio input if you want to hook something else to it and also charges the iPhone.

There are heaps of threads about "fixing" the CD error, have a search in here or in the V35 section.

For an iPod connection to the OEM head unit, the USA Spec PA15-NIS is what you'd be after for simple plug and play (although you will need to get behind the headunit)

http://usaspec.com/p...ceShowProduct=1

scchwweet, thanks for link.

I ordered mine here. Mine was a tad cheaper as the dollar was higher at the time

http://www.ebay.com.au/itm/USA-SPEC-PA15-NIS-CAR-STEREO-NISSAN-INFINITI-IPOD-AUDIO-ADAPTOR-NEW-/400268286077?pt=LH_DefaultDomain_0&hash=item5d31d9587d#ht_3202wt_1378

Edited by slippylotion

Hi All

Had a strange idling problem with my ARX - I was driving the car for good 2 hours then pulled over

strangely the car idles so low where it feels like its going to die. Any thoughts?

Also, can anyone PM me service details for each KMS ie: 10,000kms service and so fort

Thanks everyone

Cheers!!!!

So that will fit the non bose system? Does an installation manual come with it?

Yep fits the single DIN factory deck. Comes with instructions although its very easy to install. All you need to do is name the playlists on your iPhone with Nissan in them.

I run:

Nissan 1 - artists

Nissan 2 - albums

Nissan 3 - all songs

Nissan 4 - blank

Nissan 5 - blank

Nissan 6 - blank

You can set them how you like but you need to name them 1-6 with Nissan.

Nissan 5 allow direct iPhone control rather than control from the deck. If in 1-3 playlists you can jump song/albums/artist via the 1-6 buttons on the head unit.

Overall its a great unit to connect your iPhone/ipod.

Import monster/ streeter?

On another note, Im looking at wheels at the moment. Im not happy with the flap in the sidewall I currently have on one, especially considering I have a drive to Melbourne coming up. Not replacing tyres on the 17s, rather move to 18s.

Looking at either 350z track 18x8+30 or CE28S 18x8.5+30.

Ive seen pics of the 350z track fitment and it looks good. Ive also seen people with 19x8.5+22 and it looks good. Would i be right in thinking 18x8.5+30 will be a good fit?

Not sure if you remember how mine sit but they are 9+30 and I wouldn't go any lesser than that. I think a 8.5+30 will sit in the guard too far.

I'm running +37 by 8.5 and they don't stick in to far.....you can always run some spacers if you want more track!

No the 8.5 will sit out another 6mm and in another 6mm. To fill the guards I would go either a 9+30 or 8.5+22 or if you want them Out the guard a little go for 9+25. These sizes keep good clearance inside to the suspension arm.

PM me your number and I'll send you a pic of how mine sit, can't upload on here as I accidentally killed my MacBook yesterday ?

Edited by slippylotion

Well the 350Z Track wheels look ok, based on the pics Ironpaw has posted:

001-Copy.jpg

002-Copy.jpg

003-Copy.jpg

004-Copy.jpg

005-Copy.jpg

So if the 8.5 is going to give me another 6mm that sounds fine. I don't need to fill the guards right up, and I don't really want them out the guards.

Just wanted to make sure they'd clear, and try and get an idea of how the 18x8.5+30 would look compared to the 350Z 18x8+30, because I knew there were pics online of the 350Z wheels. Might give the guy a call and try and drop round and test fit on the weekend.

Cheers for the help, PM sent.

All depends on how much low you have.

The moar low, the bigger offset you can tuck in- to a point. If you dropped Ironpaws car 1 inch all round, the wheels would be tucked in and IMO wouldn't look great.

Just type in "wheel offset calculator" into Google, and that will tell you how much it will change by. Stock is 17x7 +45. Go from there. We have seen up to 18x9.5 +30... or maybe even a tougher offset on M35s.

All depends on how much low you have.

The moar low, the bigger offset you can tuck in- to a point. If you dropped Ironpaws car 1 inch all round, the wheels would be tucked in and IMO wouldn't look great.

Yep, your car is pretty damn low from memory Ryan! I'd be thinking you'll need 10mm spacers at a minimum to make them look even remotely close to "fitment".

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...