Jump to content
SAU Community

Recommended Posts

But the best thing about this one is it has one of Duncans attessa controllers, so I can make it very rear biased and hopefully be able to handle it!

Um.... actually it won't. The lowest setting on those controllers is "standard" and all other settings are just increases in FWD bias.

Sorry but the only way you are going to make it more RWD biased is to take the front shaft out or avoid accelerating hard in a straight line. :banana:

Anyways.... Go Saints.

  • Replies 705
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

street class - street tyres (>100 UTQG)

race class - semi slicks

I think the international "rules" are >140 UTQG. I don't think a blanket tyre rule is the best answer but it's certainly a lot simpler than some of the other ideas going round. Simple is best.

I agree that Russ should be left to come up with some rules and put them up. Not everyone will agree with them, but if he is putting in the effort to organise such a huge event then I think he should get final say and be respected for it.

I'm sure Russ values the opinions posted here but it is his series and I'm pretty sure he has a set of rules in mind which will be made available as soon as they are finalised. People then have a choice, run within the rules or don't run.

Just to throw a cat amongst the pigeons and get you all talking somemore, Redline Time Attacks 2007 Rules: http://www.redlinetimeattack.com/docs/2007...tackRulesV2.pdf

I think those rules look pretty reasonable, except perhaps considering the intended japanese focus of this event would mean that the widebody/overfender rule for street class wouldnt be too appropriate, considering there would be a fair number of purely street driven cars with overfenders or widebody conversions.

EDIT: Just read the modified class rules where widebodys etc *are* allowed.

I guess this would now more depend on whether 3 classes are needed/desired...

Also, just my personal opinion, I dont see why headlinings should be removable in street class.

Carpets are a bit iffy, but I guess justifiable considering some people do drive without carpet in their street car...

But really, removing roof linings would be moving a little bit too far away from street cars I believe.

I also think the no pro drivers for street class rule is a good idea

Edited by swanny180

Lets not forget that this is intend to be a SAFE time attack event. The intention is build your best car, try to have fun on the track and achieve the best optimal time (SAFELY). It's looks like the main sticky point here is tyre selection. Is there any reason why we could not have 3 simple and fair classes of shonky street tyres, semi slick and slick?

Personally, I don't care about a $50 trophy. I care about the racing spirit, my safety and being able to drive the car to the track without getting ping for using slick on the street. I will never put street tyres on my GTR cause it's just so unsafe and I will get kick off the track for drifting as well :banana:

So can we agree to disagree on the tyre aspects. What's next? Trims/panels/chassis modification?

If you're talking about the 'racing spirit' and it's being called a "time attack" event, then shouldn't there at least be some effort to align with the original Rev Speed event rules? I think the rule of no slicks, any tyre up to semi slicks is my suggestion. Most competitors will not run street rubber if they want good times, so having a street tyre class, and a semi slick class is a silly thing. Just make it any tyre people want to run, but they must have tread pattern. Done. Remember, it's about keeping it simple.

Just to throw a cat amongst the pigeons and get you all talking somemore, Redline Time Attacks 2007 Rules: http://www.redlinetimeattack.com/docs/2007...tackRulesV2.pdf

There is some dumbarse stuff in there;

- Sequential Gear Boxes Not Permitted in Street Class.

- Sequential Gear Boxes Not Permitted in Modified Class.

But sir, my car (35GTR, M3, M5, VW, Audi etc etc) comes standard with a sequential gearbox :)

- All Street Class vehicles must use DOT street tires with a UTQG tread wear rating of 140 or higher, Tires with UTQG tread wear rating under 140 are not permitted in Street Class

But sir, my car (35GTR, M3, M5, VW, Audi etc etc) comes standard with a tyre rated less than 140 :)

- All Modified Class vehicles are required to use DOT approved tires with UTQG tread wear ratings of 50 and above. Tires with less than a UTQG rating of 50 are not permitted in Modified Class.

No problem, Hoosier make a tyre that has a rating of 50 printed on it, but it's really a 30 :no:

- Front under tray cannot go rearward past the center-line of the front axle

But sir, my car comes standard with a front undertray that goes rearward past the centre line of the front axle :no:

And lastly;

- All vehicles must use tires that are legal for use on public roadways in the United States, Japan or the European Union.

What about us Ozzies? ;)

Merry Xmas

Gary

Lets not forget that this is intend to be a SAFE time attack event. The intention is build your best car, try to have fun on the track and achieve the best optimal time (SAFELY). It's looks like the main sticky point here is tyre selection. Is there any reason why we could not have 3 simple and fair classes of shonky street tyres, semi slick and slick?

Personally, I don't care about a $50 trophy. I care about the racing spirit, my safety and being able to drive the car to the track without getting ping for using slick on the street. I will never put street tyres on my GTR cause it's just so unsafe and I will get kick off the track for drifting as well ;)

So can we agree to disagree on the tyre aspects. What's next? Trims/panels/chassis modification?

only reason is that time attacks have street tyre and semi slick classes, and no full slicks. is there any reason it should be done different here?

there's nothing unsafe about using road tyres on a race track. but if you think you have too much power for them, then stay on your semi slicks and run in that class. no problem.

the point is its a much easier way to seperate the classes than trying to make your own rules based on levels of modifications. your case is a perfect example - a heavily modified car won't want to run on street tyres and therefore will be in the race/semi slick class. perfect. doesn't mean the street tyre class shouldn't be there for less modified cars. And if a heavily modified car were to run on street tyres, they'd probably struggle to beat much less modified cars that aren't overpowering their tyres, so they act as a bit of a 'leveller'.

if the classes are going to be based on mods, then using an established set of rules makes alot more sense than trying to come up with your own. either Duncan's (I think it was) suggestion of using Production and Improved Prod rules or the Rev Speed rules.

If you're talking about the 'racing spirit' and it's being called a "time attack" event, then shouldn't there at least be some effort to align with the original Rev Speed event rules? ...having a street tyre class, and a semi slick class is a silly thing.

isn't that how the original time attack rules are - street tyres and semi slicks?

isn't that how the original time attack rules are - street tyres and semi slicks?

Not sure how they group the classes/results, but I was referring to the rules not permitting full slicks. I still think the street tyres are a waste of time hehe ;)

Gary has some good points tho, whatever rules Russ comes up with should be relevant for Australia, and not include over-complicated restrictions..

Merry Xmas all!!

There is some dumbarse stuff in there;

- Sequential Gear Boxes Not Permitted in Street Class.

- Sequential Gear Boxes Not Permitted in Modified Class.

But sir, my car (35GTR, M3, M5, VW, Audi etc etc) comes standard with a sequential gearbox :laugh:

- All Street Class vehicles must use DOT street tires with a UTQG tread wear rating of 140 or higher, Tires with UTQG tread wear rating under 140 are not permitted in Street Class

But sir, my car (35GTR, M3, M5, VW, Audi etc etc) comes standard with a tyre rated less than 140 :nyaanyaa:

- All Modified Class vehicles are required to use DOT approved tires with UTQG tread wear ratings of 50 and above. Tires with less than a UTQG rating of 50 are not permitted in Modified Class.

No problem, Hoosier make a tyre that has a rating of 50 printed on it, but it's really a 30 :nyaanyaa:

- Front under tray cannot go rearward past the center-line of the front axle

But sir, my car comes standard with a front undertray that goes rearward past the centre line of the front axle :nyaanyaa:

And lastly;

- All vehicles must use tires that are legal for use on public roadways in the United States, Japan or the European Union.

What about us Ozzies? :)

Merry Xmas

Gary

that is pretty retarded. is this a cams rule list? of the top of my head 048 advans come with 60 treadware lol.

there's nothing unsafe about using road tyres on a race track. but if you think you have too much power for them, then stay on your semi slicks and run in that class. no problem.

I've tracked less powerful cars, my stock s2000 and C32AMG, with street tyres before. After a couple of laps the tyres got too soft and it's not much fun. The stability control on the Merc prevent the car from loosing control but the s2k is more than a handful to control. The attessa system on the GTR is a beauty. With twice the power output of the c32, it doesn't have significant stability problem with street tyres until the tyres get too hot. So, it really depends on the format of the time attack. If it's a 20 mins session, then I would hate to see accidents on the track because people run around on overheated street tyres just because they want to qualify for this class. Also by allowing people to run only street tyres, you are not bridging the gaps between modern cars with stability control and cars without any electronic stability control system

the point is its a much easier way to seperate the classes than trying to make your own rules based on levels of modifications. your case is a perfect example - a heavily modified car won't want to run on street tyres and therefore will be in the race/semi slick class. perfect. doesn't mean the street tyre class shouldn't be there for less modified cars. And if a heavily modified car were to run on street tyres, they'd probably struggle to beat much less modified cars that aren't overpowering their tyres, so they act as a bit of a 'leveller'.

The questions are do we want any leveller in a time attack event where we should be trying to get the best time we can achieve and what is stopping someone from winding down the boost and use street tyres?

What ever the classes will be, I will be keen to attend all of them if possible. I just hope that the rules will be simple without too many restriction. I will use all tyres; street, semi and slick; to see what is the best time I can achieve....just for the fun of it. As mentioned before, the winners will still be $100+g gtr and the extreme European exotica. Neither of which will be mine :(

Edited by 9krpm
hey duncan

what compound are the ao48's??

There are 3 "compounds" of A048, so called "soft", "medium" and "medium/hard", not all compounds are available in all sizes and to further complicate matters, Yokohama Australia (in their infinite wisdom) don't bring in all the available compounds and sizes. Consequently it woiuld be my understanding that Duncan has to race on "medium/hard". This season we changed one of the race team cars (not a Skyline) from 17" wheels to 16" so we could run the "mediums", result being 0.75 secs faster at OP. With no discernable difference in tyre life.

So if you are contemplating running A048's I strongly suggest that you check the sizes and compounds first, before you buy wheels (too late he said).

Happy New Year

Gary

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • jeebus. glad you weren't under it while performing the stunt. Also thanks for the link to the wheel measurer, exactly what I needed
    • In the older stuff there were very significant differences 2wd to 4wd, for example Stagea had strut front end for 2wd and double wishbone for 4wd so it was not minor to swap. From poking around the 2wd v37, it *looks* like it might be more possible; some of the parts specifically have "2wd" stamped on them which suggests the platforms are more similar. You'd still want to start with a 4wd half cut to swap stuff from though. I'd suggest if you don't have a tune on the ECU you don't really need one on the trans either. Throttle mapping is in the ECU side (and you can always use a Roar Pedal if you want the throttle to actually respond to your foot), and really if you are happy with the stock power you probably accept the stock trans behaviour too....its all made to be "sporty" not racey.
    • So, updates. I have not washed the car since it came back from Tassie. I've driven it around a bit but not got around to actually sorting it out. I DID raise it because I cracked the rear bar leaving a hotel which was very distressing. Interestingly, the car drives more compliant now that it's raised a fair bit (5mm front, 15mm rear). Also noticed that my FR height was 10mm lower than FL. So that's now sorted out, too. I also bought this and had it printed: https://www.etsy.com/au/listing/1576422240/wheel-and-tire-fitment-tool-universal?ref=shop_home_feat_1&dd=1&logging_key=08f604d9fa4cc383550ba985e6ac85cd5cac7fbb%3A1576422240 Now, if I was smart I would have taken my brake calipers off to actually use this correctly but it was evident enough to me that in the region where the caliper was... there was nothing to hit suspension/guard/arm wise. So I'm going with "it'll be fine" after using the tool to hopefully very precisely measure the wheel clearance. Also while doing this, I had the very VERY bad idea of jacking one of the wheels/suspension arms up while the rest of the car was on jack stands. I did this to see how the arm would travel. This all was well and good until the car slid off the stands and went through a fence. So don't do that. Incredibly nobody was hurt and there was only minor damage to the rear bumper as the car didn't have far to slide, and had 3-4 wheels on it. The only damage turned out to be the fence itself which was easy to fix, and a little bit of damage to the fibreglass rear bumper trim. I had already planned to try a touch up paint kit to fix the time I drove into my garage door to see if it'd help in the interim before I get it fixed properly. I used the Dr Colorchip kit after looking online and seeing everyone talking about it. Yes it's made for chips and not huge broken missing pieces and I'll be 500% recommending it for stone chips after using it for stupid things like me. This took about ... 10 minutes and looking at the half assed photo the 30 second job I did on the bumper corner was almost perfect just by using the tiny little brush and painting it in. The sealact stuff to remove over-painting is really useful, so if/when I do it again I'll likely slather the touch up paint well over it and then clean it up with the cleaning solution. The wheels should arrive in a couple of weeks. I am still kinda confident after doing a stupid amount of measuring (and borrowing a set of 18x10.5+15) that they will not fit because I overlooked something, somehow and flew too close to the sun. ALSO R34 GTR guard liners do not fit on a GTT. I bought the undertray brake duct guides and had the wonderful problem of them not fitting my intake, my oil cooler and the liners themselves were even worse. Attempting to fit them won't work in general - You would have to cut them up as another poster mentioned as the bodywork is different on the GTT. At least I can try to resell them. So instead of cutting those up, I cut up my old already-cut-up GTT liners and extended them by using some PP plastic and drilling some 8mm holes for some nissan clips for the 'extra' bit. Because I was happy to cut them I was able to mount them pretty damn forward so I now have some semblance of guard liners, and the brake vents seal the bumper from the bottom. It sort-of-looks like this, to give some idea - If you look at the GTR and then the GTT this is when I realised that I needed to seriously measure as the inside of the rim area is entirely, entirely, entirely different and could not take any internet measurements for granted.   
    • If you are Ecutek tuned then these TCU tunes are anywhere from $550 to $700 usd. If you are not ECUTEK tuned, then it gets costly!    
    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
×
×
  • Create New...