Jump to content
SAU Community

Recommended Posts

just back from the tuners its like a new car just got a gt3076r installed running 16psi on low boost setting and 21psi on high boost settings. any one tell me what this dyno sheet is telling me. looks like at the top end its letting go. could this be cams?

i have all the supporting mods.

cheers

post-32900-1191075049_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/187275-just-got-r33-from-tuners/
Share on other sites

PS, i have no idea how or why Cams would give you jumpy power like that.

I really doubt that's what it is, and the power level (250) isn't anything that Cams would have a problem with.

I guess what i'm saying is that Cams could handle 2000rwkws as long as the engine and turbo were up to it.

The only reason you would change Cams is to improve power gains across the rev range etc....

Nothing wrong with standard though if you're punching more air in.

Two distinct dips but not shaky looking graph line.

I'd suspect 1-2 degrees of timing taken out to address knock. A look at your ignition map will soon tell. :)

The over 4000rpm results looks good, but what do you think about things under that engine speed? Looks a bit lazy to come on for you. This spec should be generally similar to The Mafia, and he's pulling 300kW out of 18psi + a much more linear looking curve throughout the range with the assistance of water/meth.

Edited by Dale FZ1
I'd suspect 1-2 degrees of timing taken out to address knock. A look at your ignition map will soon tell. :P
whats your timing degrees tuned at? if you take out 1 - 2 degrees timing, you will get slightly better mid range power but less peak power..

Previous posts by Murat, and the comment about "all supporting mods" indicates he has a PFC.

I'm suggesting it's in the spark mapping ie adjusting one or two specific cells in the map, not the base timing being adjusted by a degree or two :)

Could be wrong but that's where I'd look if there is a concern/query about the shape of the graph

Edited by Dale FZ1
whats your timing degrees tuned at? if you take out 1 - 2 degrees timing, you will get slightly better mid range power but less peak power..

Explain to me how removing timing is going to improve his midrange???

Id really like to know!

It looks like the exhaust housing may be to small If its not retard to much in the topend.

What sort of timing is it running through the top?? and like others have suggested what exhaust housing are you using??

core number is 700382-5012

compressor housing is .60A/R

turbine housing is .82A/R internal wastegate

if that helps is there any one i can take the car too give me a hand with the problem?

money is no problem.

dude, thats the same turbo as me. (GT3037) I make 15psi by 3900rpm in second gear.

The bigger rear must give it a bit more lag hey?

Also, can you list your supporting mods?

I make just over 300rwkw at 18psi on this turbo.

dude, thats the same turbo as me. (GT3037) I make 15psi by 3900rpm in second gear.

The bigger rear must give it a bit more lag hey?

Also, can you list your supporting mods?

I make just over 300rwkw at 18psi on this turbo.

Engine management - PFC

Boost ran - 18psi

Turbo - Garrett GT3076r

Nismo 740cc injectors

Bosch 040 pump

Gready EBC Profec II

Z32 80mm Air Flow Meter

Hybrid Intercooler

3inch Exhaust turbo back

Splitfire Coil Packs

Stock Internals

no head work

Fuel pump

its not that bad i get about 15psi by 3800rpm its depends on the engine load at the time 5th gear its full boost by 3500

thats strange, as I have almost the same setup, but with a smaller turbo rear.

That wavey line looks dodgey. Are the AFR's staying safe while it is doing that? Is the fuel pump healthy? You'll need to test your pressures.

thats strange, as I have almost the same setup, but with a smaller turbo rear.

That wavey line looks dodgey. Are the AFR's staying safe while it is doing that? Is the fuel pump healthy? You'll need to test your pressures.

AFR are safe its is running rich because after about an hour of driving the back bumper has a light black color, fuel pump was installed about 3 months ago brand new, what i will check is the cat see if it is choking and do a pressure test, i know i should be getting abit more becuase i have read your 300kw advantage this is what i have built my car from. so im abit shocked.

anything else you reckon i can check out ?

i have notice one more thing with the car the idle is very high sits at about 900 to 1000 rpm, i tried to reset it to a lower figure but it still sits up at 900 to 1000 rpm could this be a connected problem?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...