Jump to content
SAU Community

Recommended Posts

Guys i have a question for you people. I got a job as a mechanic apprentice and i start tomorrow. My dad is pushing me not to do it and get into something else because of the money and future. When do you think motor cars will be phased out and replaced with electric cars? What will happen to motor mechanics then.... Give me your honest opinion before i screw my life over and get into an industry that wont last!!!

Link to comment
https://www.sau.com.au/forums/topic/187362-cars-running-on-power/
Share on other sites

i wouldnt be too worried about the cars being phased out, they will still be around for more than the next 40 years (your working life) although i love cars i didnt go into that industry because the money isnt so good, its pretty dirty work (not a real big issue) and theres so many of them around, which makes it harder to find work, and will keep the pay rates low IMO.

i personally am doing my boilermaker apprenticeship atm, because i dont mind fabrication and its something i wanted to learn, if i was to do anything else, probly plumbing (good conditions, pay etc).

the other thing is, all my mates that have become mechanics, they've all lost the passion and cbf workin on they're own cars, and as a guy that i work with told me 'working on cars is my hobby, i'll do it when/how i want to' and it makes sense to me. obviously you wont be pro right away, but i've found theres always plenty of people out there to help/show you things, and i've learned alot of things this way

that said your starting tomorow so do it and see what you think of it, if you like it, stay with it. just find something you enjoy and the money will come

Well i did my plumbing pre-apprenticeship at the start of the year, but i had 2 operations on my right knee late last year. It hasn't healed properly and i don't know if it ever will, and i cant fully bend down because it feels like it's about to f**king explode. I thought go do another trade, but didn't know what because Air Con's/Sparkies/Plumbers/Carpenters are constantly on their knee's. Mechanics/Panel beaters aren't, but the money's f**ked!

After 20 minutes of depressing thoughts, i think i will just go into the workshop tomorrow, and embarrass myself by telling the boss i'm backing out for certain reasons. Next step: working out my knee overtime and starting plumbing by the end of the year. f**kin digging my ass off, and f**king my knee harder for my first year... how exciting!

dw mate. their is a thing called economic engineering. basically all cars "in general" are designed to last 20 years. As for electric cars, the process of making the Li batt on a large scale is still expensive to be widely used in automotive industry. its still too heavy and inefficient.

my advice is focus on the electrical side of things to the automotive industry as everything is becoming automated.

The only downfall I can think of is the fact that the authorities are so strict now on modified Sports cars... so if you're a mechanic in general I wouldn't worry; but if you are in modification of sports cars... there may be a downfall here.

Cheers,

My dad is pushing me not to do it and get into something else because of the money and future. When do you think motor cars will be phased out and replaced with electric cars?

Is your dad a tree hugging hippy with a severe reality disconnect?

The state of electric cars right now is shit. Most of them have a really shit range, and because electric motors lack the power / energy storage capacity they have to be made light. Which, for a budget car, means flimsy.

The only production pure electric car out there I'm aware of is the G-Wiz, and when their crash test results look like this:

advgwiz.gif

There was an interview in last season's Top Gear with Kirsten Scott Thomas, who owns a G-Wiz, and she said that the electrical system in the car's so pissweak that you can't use the wipers and headlights at the same time. With that kind of "safety", I don't think internal combustion is going to be in any danger in the near future.

If you have a look at the future of automotive energy sources, you'll see that only a few people are trying to go pure electric. Most are either looking at biofuels, or hydrogen. Both are still internal combustion, the only difference is the fuel used. The basic principles are still the same. In this day and age, you can't expect that you only need to learn 3 years' worth of knowledge and expect it to last you to retirement.

u can still work as a mechanic and not have a licence. my mate is a mechanic and he lost his licence for 3 months.

as for the money, it isn't that bad. it just depends on where you work. my mate was only getting paid for hours booked (not a set amount of hours per week) and he was making about $1000 a week. there are a lot of jobs with less pay than that, retail for example. full adults wage of just over $500 a week for 38 hours.

what about an auto electrician?

They get paid about the same as mechanics, in some cases more

Do an apprenticeship

basically start off with the small stuff, installing alarms, stereos, speakers etc

Then you move onto wiring up engine looms, powerFCs etc

Then you get to go into tuning them eventually :rolleyes:

I reckon do that, that'll keep your dad quiet about the "electric cars" thing, because you'll be positioned to move straight onto those :( if that ever becomes common place over the next 20-30 years, which somehow i doubt at the moment, but I could be proven wrong

what about an auto electrician?

They get paid about the same as mechanics, in some cases more

Do an apprenticeship

basically start off with the small stuff, installing alarms, stereos, speakers etc

Then you move onto wiring up engine looms, powerFCs etc

Then you get to go into tuning them eventually :rolleyes:

I reckon do that, that'll keep your dad quiet about the "electric cars" thing, because you'll be positioned to move straight onto those :( if that ever becomes common place over the next 20-30 years, which somehow i doubt at the moment, but I could be proven wrong

^^ +11ty

most sensible post yet IMO.

DEFINATELY go with the sparky side of things. Its less dirty, alot more technically challenging and the sparking side of things is becoming more and more a "black arts" area which means more specialization and higher charge rates.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...