Jump to content
SAU Community

Recommended Posts

Guys i have a question for you people. I got a job as a mechanic apprentice and i start tomorrow. My dad is pushing me not to do it and get into something else because of the money and future. When do you think motor cars will be phased out and replaced with electric cars? What will happen to motor mechanics then.... Give me your honest opinion before i screw my life over and get into an industry that wont last!!!

Link to comment
https://www.sau.com.au/forums/topic/187362-cars-running-on-power/
Share on other sites

i wouldnt be too worried about the cars being phased out, they will still be around for more than the next 40 years (your working life) although i love cars i didnt go into that industry because the money isnt so good, its pretty dirty work (not a real big issue) and theres so many of them around, which makes it harder to find work, and will keep the pay rates low IMO.

i personally am doing my boilermaker apprenticeship atm, because i dont mind fabrication and its something i wanted to learn, if i was to do anything else, probly plumbing (good conditions, pay etc).

the other thing is, all my mates that have become mechanics, they've all lost the passion and cbf workin on they're own cars, and as a guy that i work with told me 'working on cars is my hobby, i'll do it when/how i want to' and it makes sense to me. obviously you wont be pro right away, but i've found theres always plenty of people out there to help/show you things, and i've learned alot of things this way

that said your starting tomorow so do it and see what you think of it, if you like it, stay with it. just find something you enjoy and the money will come

Well i did my plumbing pre-apprenticeship at the start of the year, but i had 2 operations on my right knee late last year. It hasn't healed properly and i don't know if it ever will, and i cant fully bend down because it feels like it's about to f**king explode. I thought go do another trade, but didn't know what because Air Con's/Sparkies/Plumbers/Carpenters are constantly on their knee's. Mechanics/Panel beaters aren't, but the money's f**ked!

After 20 minutes of depressing thoughts, i think i will just go into the workshop tomorrow, and embarrass myself by telling the boss i'm backing out for certain reasons. Next step: working out my knee overtime and starting plumbing by the end of the year. f**kin digging my ass off, and f**king my knee harder for my first year... how exciting!

dw mate. their is a thing called economic engineering. basically all cars "in general" are designed to last 20 years. As for electric cars, the process of making the Li batt on a large scale is still expensive to be widely used in automotive industry. its still too heavy and inefficient.

my advice is focus on the electrical side of things to the automotive industry as everything is becoming automated.

The only downfall I can think of is the fact that the authorities are so strict now on modified Sports cars... so if you're a mechanic in general I wouldn't worry; but if you are in modification of sports cars... there may be a downfall here.

Cheers,

My dad is pushing me not to do it and get into something else because of the money and future. When do you think motor cars will be phased out and replaced with electric cars?

Is your dad a tree hugging hippy with a severe reality disconnect?

The state of electric cars right now is shit. Most of them have a really shit range, and because electric motors lack the power / energy storage capacity they have to be made light. Which, for a budget car, means flimsy.

The only production pure electric car out there I'm aware of is the G-Wiz, and when their crash test results look like this:

advgwiz.gif

There was an interview in last season's Top Gear with Kirsten Scott Thomas, who owns a G-Wiz, and she said that the electrical system in the car's so pissweak that you can't use the wipers and headlights at the same time. With that kind of "safety", I don't think internal combustion is going to be in any danger in the near future.

If you have a look at the future of automotive energy sources, you'll see that only a few people are trying to go pure electric. Most are either looking at biofuels, or hydrogen. Both are still internal combustion, the only difference is the fuel used. The basic principles are still the same. In this day and age, you can't expect that you only need to learn 3 years' worth of knowledge and expect it to last you to retirement.

u can still work as a mechanic and not have a licence. my mate is a mechanic and he lost his licence for 3 months.

as for the money, it isn't that bad. it just depends on where you work. my mate was only getting paid for hours booked (not a set amount of hours per week) and he was making about $1000 a week. there are a lot of jobs with less pay than that, retail for example. full adults wage of just over $500 a week for 38 hours.

what about an auto electrician?

They get paid about the same as mechanics, in some cases more

Do an apprenticeship

basically start off with the small stuff, installing alarms, stereos, speakers etc

Then you move onto wiring up engine looms, powerFCs etc

Then you get to go into tuning them eventually :rolleyes:

I reckon do that, that'll keep your dad quiet about the "electric cars" thing, because you'll be positioned to move straight onto those :( if that ever becomes common place over the next 20-30 years, which somehow i doubt at the moment, but I could be proven wrong

what about an auto electrician?

They get paid about the same as mechanics, in some cases more

Do an apprenticeship

basically start off with the small stuff, installing alarms, stereos, speakers etc

Then you move onto wiring up engine looms, powerFCs etc

Then you get to go into tuning them eventually :rolleyes:

I reckon do that, that'll keep your dad quiet about the "electric cars" thing, because you'll be positioned to move straight onto those :( if that ever becomes common place over the next 20-30 years, which somehow i doubt at the moment, but I could be proven wrong

^^ +11ty

most sensible post yet IMO.

DEFINATELY go with the sparky side of things. Its less dirty, alot more technically challenging and the sparking side of things is becoming more and more a "black arts" area which means more specialization and higher charge rates.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...